Nach oben

  1. Informationen zum
    Hersteller:

  2. Artikelnummer: BPI-M2-BERRY

    Banana Pi M2 Berry - Quad-Core Mini Single Board Computer

    Preis: 42,99 EUR
    inkl. 19 % MwSt.
    (Netto: 36,13 EUR)
    zzgl. Versandkosten
    Gewicht: 0.00 Kg
    Verfügbarkeit: 2-4 Tage
    Artikelblatt drucken

    Notifications Sie können nur Sie müssen mindestens Stück von diesem Artikel in den Warenkorb legen. Artikel in den Warenkorb legen.

    Banana Pi M2 Berry - Quad-Core Mini Single Board Computer

    Banana Pi BPI-M2 Berry is a quad-core mini single board computer built with Allwinner V40 SoC. It features 1 GB of RAM . It also has onboard WiFi and BT. On the ports side, the BPI-M2 Berry has 4 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, a DC power port, and a SATA port.

    Also being a member of the Banana Pi family, the M2 Berry is a direct upgrade from the Banana Pi M1/M1+ that supports SATA from the SoC. The SATA performance on the V40 is fitting for media related projects such as storage servers. Backed by the Banana Pi community, starting a project and building servers is fun and rewarding.

    Key Features

    • Quad-core ARM Cortex-A7 CPU V40
    • 1 GB DDR3 SDRAM
    • WiFi (AP6212) & Bluetooth onboard
    • SATA interface

    Specifications

    • CPU: Quad-core Cortex-A7 V40
    • GPU: MALI-400 MP2 @ 500 MHz
    • Memory: 1 GB DDR3 SDRAM  (shared with GPU)
    • Storage Support: MicroSD card (up to 64 GB) / SATA
    • Onboard Network: 10/100/1000 Mbps Ethernet (Realtek RTL8211E/D)
    • WiFi: 802.11 b/g/n (AP6212)
    • Bluetooth: BT4.0 (AP6212)
    • Video In: CSI connector that supports 8-bit YUV422 CMOS sensor CSI, CCIR656 protocol for NTSC and PAL, 5 MP camera, 1080p video @ 30 Hz
    • Video Out: HDMI 1.4 1080P60; MIPI DSI for RAW LCD panels
    • Audio Out: 3.5 mm Jack and HDMI
    • Audio In: Onboard microphone
    • Power Source: 5 V 2 A Micro USB
    • USB Ports: 4x USB 2.0, USB OTG (Micro USB)
    • Buttons: Reset button, power button, U-boot button
    • GPIO: 40 Pins: GPIO, UART, I2C bus, I2S bus, SPI bus, PWN, +3.3v, +5v, ground
    • LED: Power status LED and RJ45 LED
    • IR: Onboard IR receiver
    • OS: Android and Linux etc. OS
    • Dimensions: 92 mm x 60 mm
    • Weight: 45 g