Nach oben

  1. Informationen zum
    Hersteller:

  2. Artikelnummer: 320122

    Banana Pi camera module for BPI-M2+ (OV5640)

    Preis: 32,19 EUR
    inkl. 19 % MwSt.
    (Netto: 27,05 EUR)
    zzgl. Versandkosten
    Gewicht: 0.01 Kg
    Verfügbarkeit: Sofort
    Artikelblatt drucken

    Notifications Sie können nur Sie müssen mindestens Stück von diesem Artikel in den Warenkorb legen. Artikel in den Warenkorb legen.

    Banana Pi camera module for BPI-M2+ (OV5640)

    OV5640 camera module for Banana Pi BPI-M2+.

    Please note: this module is not same as for BPI-M1/-M1+/M2. The Banana Pi BPI-M2+ directly supports the OV5640 module, so there's no need for an extansion board. You can directly use the OV5640 module on the CSI interface.

    If you have a BPI-M1/M1+/M2 camera module, you can remove the camera module from the extansion board and use it on the BPI-M2+.

    OV5640 specifications

    • Active array size: 2592 x 1944
    • Power supply:
      • Core: 1.5 V ± 5% (with embedded 1.5 V regulator)
      • Analog: 2.6 ~ 3.0 V (2.8 V typical)
      • I/O: 1.8 / 2.8 V
    • Power requirements:
      • Active: 140 mA
      • Standby: 20 μA
    • Temperature range:
      • Operating: -30°C to 70°C junction temperature
      • Stable image: 0°C to 50°C junction temperature
    • Output formats: 8-/10-bit RGB RAW output
    • Lens size: 1/4"
    • Lens chief ray angle: 24°
    • Input clock frequency: 6 ~ 27 MHz
    • Max. S/N ratio: 36 dB (maximum)
    • Dynamic range: 68 dB @ 8x gain
    • Maximum image transfer rate:
      • QSXGA (2592 x 1944): 15 fps
      • 1080p: 30 fps
      • 1280 x 960: 45 fps
      • 720p: 60 fps
      • VGA (640 x 480): 90 fps
      • QVGA (320 x 240): 120 fps
    • Sensitivity: 600 mV/Lux-sec
    • Shutter: rolling shutter / frame exposure
    • Maximum exposure interval: 1964 x tROW
    • Pixel size: 1.4 x 1.4 μm
    • Dark current: 8 mV/s @ 60°C junction temperature
    • Image area: 3673.6 x 2738.4 μm
    • Package dimensions: 5985 x 5835 μm

     


Auch gekauft