Ubiquti EM-EP-5 - EtherMagic EndPoint, 5-Pack
PLEASE NOTE: THIS IS A 5-PACK.
Connectivity Now Possible Everywhere
Introducing EtherMagic™, an innovative Powerline Communication (PLC) system featuring Gigabit multipoint connectivity and PoE capabilities. EtherMagic instantly transforms your electrical circuit into a 1200 Mbps Ethernet network without the need to install Ethernet cabling.
In the EtherMagic system, an intelligently designed multipoint switch pairs with up to 32 EndPoints. Each EndPoint features built-in PoE, for much simpler installation than systems that require separate PoE adapters.
Setup is quick and easy using the EtherMagic mobile app. EtherMagic is the ideal solution for networking wired devices in buildings where Ethernet cabling is unavailable or difficult to install.
Significant Cost Savings
EtherMagic instantly transforms existing electrical wiring inside buildings into an EtherMagic network. EtherMagic creates a new range of possibilities by providing a cost‑effective, wired network solution for older buildings where Ethernet cabling is unavailable or impractical to install. EtherMagic potentially saves tens of thousands of dollars in installation and cabling costs.
Point-to-MultiPoint Gigabit Network
Unlike PLC systems that are typically point-to-point bridges, EtherMagic systems are point‑to‑multipoint networks. The EtherMagic Switch works the magic by networking up to 32 EndPoints, and essentially operates and performs like a 32‑port Gigabit Ethernet switch.
The EtherMagic system offers amazing network scalability – perhaps only limited by the number of available outlets in the building. An EtherMagic network can support up to 320 EndPoints: up to 10 switches on the same electrical circuit, and up to 32 EndPoints paired to each switch.
Advantage over Wireless
EtherMagic leverages HomePlug AV2* MIMO technology for robust PLC networking with speeds of up to 1200 Mbps. Rivaling wireless, EtherMagic significantly increases the reliability of high‑bandwidth connections to all areas of the building.
Video applications especially benefit from the advantages of EtherMagic by being physically connected to the network, and free from radio interference or Wi‑Fi connectivity issues.
Built-In PoE+ Capability
Each EndPoint features a Gigabit Ethernet port with PoE output capability. EndPoints provide the flexibility to set PoE output to support a variety of PoE devices:
- 802.3af/at auto-sensing (48 V)
- 24 V passive PoE
- PoE off
By default, non-PoE devices can be safely connected to the EndPoints with auto‑sensing 802.3af/at. For added assurance, PoE output can be disabled entirely.
For flexible customization, EtherMagic is sold in a variety of packages:
- EM-KIT: (1) EtherMagic Switch, (3) EtherMagic EndPoints
- EM-S: (1) EtherMagic Switch
- EM-EP: (1) EtherMagic EndPoint
- EM-EP-5: (5) EtherMagic EndPoints
Hardware Specifications - EtherMagic EndPoint: EM-EP
- Dimensions: 107 x 62.4 x 40.7 mm (4.21 x 2.46 x 1.60")
- Weight: 190 g (6.70 oz)
- Networking interfaces:
- (1) PLC, 1200 Mbps
- (1) RJ45, PoE+, 10/100/1000 Mbps
- Management interface: EtherMagic App
- PoE out:
- Modes: 802.3af/at (PoE+), 24 V passive, off
- PoE+ voltage range: 48 V DC nominal
- Max. PoE+ wattage: 32 W
- Passive PoE voltage range: 24 V DC
- Max. passive PoE wattage: 16 W
- PLC standard: HomePlug AV2 MIMO
- Power method: AC utility power
- Max. power consumption: 8 W (PoE excluded)
- Network expandability: Up to (32) EM-EP per (1) EM-S
- Supported voltage range: 100 to 240 V
- Operating temperature -10°C to 45°C (14°F to 113°F)
- Operating humidity: 10 to 90% non-condensing
- Certifications: CE, FCC, IC
PLEASE NOTE: THIS IS A 5-PACK.