EDR-8010-2GSFP - 8 FE Kupfer- und 2 GbE SFP-Multiport-Router für industrielle Sicherheit

Die industriellen Sicherheitsrouter der EDR-Serie von Moxa schützen die Steuerungsnetzwerke kritischer Anlagen und gewährleisten gleichzeitig eine schnelle Datenübertragung. Sie wurden speziell für Automatisierungsnetzwerke entwickelt und sind integrierte Cybersicherheitslösungen, die eine industrielle Firewall, VPN, Router und L2-Switching-Funktionen in einem einzigen Produkt vereinen, das die Integrität von Fernzugriffen und kritischen Geräten schützt.

8 FE Kupfer und 2 GbE SFP Multiport Industrial Secure Router mit Firewall/NAT, 12/24/48 VDC Eingangsspannung, -10 bis 60°C Betriebstemperatur

Input/Output Interface
- Alarm Contact Channels Resistive load: 1 A @ 24 VDC
- Buttons Reset button
- Digital Input Channels +13 to +30 V for state 1
-30 to +3 V for state 0 Max. input current: 8 mA

Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector) 8
- 1000BaseSFP Slots 2
- Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for flow control
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
Static Port Trunk
- DMZ User-configurable DMZ ports

Ethernet Software Features
- Broadcast Forwarding IP directed broadcast, broadcast forwarding
- Management
Back Pressure Flow Control
DDNS
DHCP Server/Client
Web Console (HTTP/HTTPS)
LLDP
QoS/CoS/ToS
SNMPv1/v2c/v3
Telnet
TFTP
HTTPS
SSH
- Redundancy Protocols
RSTP
STP
Turbo Ring v2
Turbo Chain
- Routing Throughput Max. 50K packets per second / 500 Mbps (based on RFC 2544)
- Routing Table Max. 4K routing rules
- Concurrent Connections Max. 120K (based on RFC 3511)
- Connections Per Second Max. Max. 6K (based on RFC 3511)
- Routing Redundancy VRRP
- Security
Secure Boot
IPsec
L2TP (server)
RADIUS
Trust access control
TACACS+
- Time Management
NTP Server/Client
SNTP
- Unicast Routing
OSPF
RIPV1/V2
Static Route
- Multicast Routing
Static Route
- Filter IGMP v1/v2/v3

Switch Properties
- VLAN ID Range VID 1 to 4094
- IGMP Groups 256
- Max. No. of VLANs 16

LED Interface
- LED Indicators PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB

DoS and DDoS Protection
- Technology
ARP-Flood
FIN Scan
ICMP Flood
TCP Sessions Without SYN
NMAP-ID Scan
NMAP-Xmas Scan
Null Scan
SYN/FIN Scan
SYN/RST Scan
SYN-Flood
Xmas Scan

Firewall
- Filter

DDoS

Ethernet protocols
ICMP
IP address
MAC address
Ports
- Stateful Inspection
Router firewall
Transparent (bridge) firewall
- Deep Packet Inspection
Modbus TCP
Modbus UDP
DNP3
IEC 60870-5-104
IEC 61850 MMS
EtherNet/IP
Omron FINS
Siemens S7 Comm.
Additional protocols will be supported through future firmware updates.
- Intrusion Prevention System
Requires an additional license.
- Throughput
Firewall:
Max. 50K packets per second / 500 Mbps (based on RFC 2544)

IPsec VPN
- Authentication
MD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit)
X.509 v3 certificate
- Concurrent VPN Tunnels
Max. 50 IPsec VPN tunnels
- Encryption
DES
3DES
AES-128
AES-192
AES-256
- Protocols
IPsec
L2TP (server)
PPTP (client)
- Throughput
Conditions: AES-256, SHA-256
Max. 25K packets per second / 200 Mbps (based on RFC 2544)

NAT
- Features
1-to-1
N-to-1
Port forwarding
NAT loopback

Real-Time Firewall / VPN Event Log
- Event Type
Firewall event
VPN event
- Media
Local storage
SNMP Trap
Syslog server

Serial Interface
- Console PortRS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
- Connector USB Type-C

Power Parameters
- ConnectionRemovable terminal block
- Operating Voltage9.6 to 60 VDC
- Input Voltage 12/24/48 VDC, redundant dual inputs (DNV-certified for 24 VDC)
- Input Current
0.53 A @ 12 VDC
0.26 A @ 24 VDC
0.14 A @ 48 VDC
- Reverse Polarity Protection Supported

Physical Characteristics
- HousingMetal
- Dimensions 45 x 135 x 105 mm (1.77 x 5.31 x 4.13 in)
- Weight520 g (1.15 lb)
- Installation
DIN-rail mounting (DNV-certified)
Wall mounting (with optional kit)

Environmental Limits
- Operating Temperature -10 to 60°C (14 to 140°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications
- Safety
IEC 62368-1
UL 62368-1
- EMC EN 55032/35
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
- Railway EN 50121-4
- Traffic Control NEMA TS2
- Maritime
IEC 60945
DNV
- Shock IEC 60068-2-27
- Freefall IEC 60068-2-32
- Vibration IEC 60068-2-6
- Power Substation
IEC 61850-3 Edition 2.0
IEEE 1613
- Hazardous Locations
ATEX
Class I Division 2
IECEx

MTBF
- Time 1,347,225 hrs
- Standards Telcordia (Bellcore), GB