UC-8410A-T-LX - Arm-basierter, drahtloser, wandmontierter Industriecomputer mit Cortex-A7

Die kompakten lüfterlosen Industriecomputer auf Arm-Basis von Moxa sind Wireless-fähig und verfügen über umfassende Sicherheitsfunktionen. Sie sind für platzkritische Anwendungen konzipiert. Die Computer sind speziell für den Langzeitbetrieb konzipiert was sie zur idealen Wahl für Fernüberwachungs- und Datenerfassungsanwendungen macht.

Arm-basierter, drahtloser, wandmontierter Industriecomputer mit Cortex-A7 1 GHz Dual-Core, 1 SD-Slot mit vorinstallierter 1-GB-Karte, 512 MB DDR3L RAM, 8 serielle Ports, 4 DIs, 4 DOs, 3 Ethernet-Ports, Wireless-fähig, 1 mSATA-Slot, 1 USB-Port, Debian 8, -40 bis 75°C Betriebstemperatur

Computer
- CPU Armv7 Cortex-A7 dual-core 1 GHz
- System Memory Pre-installed 1 GB DDR3L
- Storage Pre-installed 8 GB eMMC
- Storage Slot
SD slots x 1
mSATA slots x 1, internal mini-PCIe socket
- Supported OS
Linux Debian 8 (Linux kernel v4.1), 2022 EOL
Moxa Industrial Linux 1 (Debian 9, kernel 4.4), 2027 EOL

Computer Interface
- Ethernet Ports Auto-sensing 10/100/1000 Mbps ports (RJ45 connector) x 3
- Serial Ports RS-232/422/485 ports x 8, software selectable (RJ45)
- USB 2.0 USB 2.0 hosts x 2, type-A connectors
- Digital Input DIs x 4
- Digital Output DOs x 4
- Expansion Slots mPCIe slots x 1
- Cellular Antenna Connector SMA x 2
- Number of SIMs 1
- SIM Format Mini
- Console Port 1 x 4-pin header to DB9 console port

Ethernet Interface
- Magnetic Isolation Protection 1.5 kV (built-in)

Serial Interface
- Baudrate 50 bps to 115.2 kbps
- Data Bits 5, 6, 7, 8
- Stop Bits 1, 1.5, 2
- Parity None, Even, Odd, Space, Mark
- Flow Control
RTS/CTS, XON/XOFF
ADDC (automatic data direction control) for RS-485
RTS Toggle (RS-232 only)

Serial Signals
- RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w Data+, Data-, GND
- RS-485-4w Tx+, Tx-, Rx+, Rx-, GND

Digital Inputs
- Channel-to-Channel Isolation 3000 VDC
- Connector Screw-fastened Euroblock terminal
- Dry Contact
On: short to GND
Off: open
- Sensor Type
Dry contact
Wet contact (NPN or PNP)
- Wet Contact (DI to COM)
On: 10 to 30 VDC
Off: 0 to 3 VDC

Digital Outputs
- Connector Screw-fastened Euroblock terminal
- Current Rating 200 mA per channel
- I/O Type Sink
- Voltage Open-drain to 30 VDC

LED Indicators
- System
Power x 1
System ready x 1
Storage x 1
Programmable x 10
- LAN 2 per port (10/100/1000 Mbps)
- Serial 2 per port (Tx, Rx)

Power Parameters
- Input Current 1.57A @ 12 VAC max.
- Input Voltage 12 to 48 VDC
- Power Consumption 19 W (max.)
- Power Connector Terminal block (for DC models)

Physical Characteristics
- Dimensions 200 x 120 x 48.6 mm (7.87 x 4.72 x 1.91 in)
- Weight 1,000 g (2.21 lb)
- Housing Metal
- IP Rating IP30
- Installation Wall mounting (standard)

Environmental Limits
- Operating Temperature -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications
- EMC EN 55032/35
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 0.5 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF
- Safety UL/IEC 60950-1 & 62368-1
- Shock IEC 60068-2-27
- Vibration IEC 60068-2-64

Declaration
- Green Product RoHS, CRoHS, WEEE