UC-8220-T-LX-AP-S (CTO) - Arm Cortex-A7 Dual-Core 1 GHz IIoT-Gateway mit integriertem TPM-Modul

Computer
- CPU: Armv7 Cortex-A7 dual-core 1 GHz
- DRAM: 2 GB DDR3L
- Supported OS
Moxa Industrial Linux 1 (Debian 9, kernel 4.4), 2027 EOL
Moxa Industrial Linux 3 (Debian 11, kernel 5.10), 2031 EOL
- Storage Pre-installed: 8 GB eMMC
- Expansion Slots: MicroSD (SD 3.0) socket x 1

Computer Interface
- Ethernet Ports: Auto-sensing 10/100/1000 Mbps ports (RJ45 connector) x 2: Serial Ports
- RS-232/422/485 ports x 2, software selectable (DB9 male)
- CAN Ports: CAN 2.0 A/B x 1 (DB9 male)
- Digital Input: DIs x 4
- Digital Output: DOs x 4
- USB 2.0: USB 2.0 hosts x 1, type-A connectors
- Wi-Fi Antenna Connector: RP-SMA x 2
- Cellular Antenna Connector: SMA x 2
- GPS Antenna Connector: SMA x 1
- Expansion Slots: mPCIe slots x 1
- SIM Format: Nano
- Number of SIMs: 2
- Buttons: Programmable button
- TPM: TPM v2.0

Ethernet Interface
- Magnetic Isolation Protection: 1.5 kV (built-in)

Security Functions
- Hardware-based Security: TPM 2.0, Hardware Root of Trust Secure Boot:
- Intrusion Detection: Host-based Intrusion Detection
- Security Tools
Security Diagnostic Tool
Security Event Auditing
Secure Update
- Disk Protection: LUKS Disk Encryption
- Recovery
One-step recovery to the last known secure state
Dual-system design with automatic failback
- Reliability
Network Keep Alive
Network Failover and Failback

Serial Interface
- Baudrate: 300 bps to 921.6 kbps
- Data Bits: 7, 8
- Stop Bits: 1, 2
- Parity: None, Even, Odd, Space, Mark
- Flow Control
RTS/CTS, XON/XOFF
ADDC (automatic data direction control) for RS-485
RTS Toggle (RS-232 only)
- Console Port: 1 x 4-pin header to DB9 console port

Serial Signals
- RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422: Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w: Data+, Data-, GND

CAN Interface
- No. of Ports: 1
- Connector: DB9 male
- Baudrate: 10 to 1000 kbps
- Industrial Protocols
CAN 2.0A
CAN 2.0B
- Isolation: 2 kV (built-in)
- Signals: CAN_H, CAN_L, CAN_GND, CAN_SHLD, CAN_V+, GND

Digital Inputs
- Connector: Screw-fastened Euroblock terminal
- Dry Contact
Off: open
On: short to GND
- Isolation: 3K VDC
- Sensor Type
Wet contact (NPN)
Dry contact
- Wet Contact (DI to COM)
On: 10 to 30 VDC
Off: 0 to 3 VDC

Digital Outputs
- Connector: Screw-fastened Euroblock terminal
- Current Rating: 200 mA per channel
- I/O Type: Sink
- Voltage: 24 VDC nominal, open collector to 30 VDC

Cellular Interface
- Cellular Standards: LTE Cat. 4
- Band Options
LTE Band 1 (2100 MHz) / LTE Band 3 (1800 MHz) / LTE Band 5 (850 MHz) / LTE Band 7
(2600 MHz) / LTE Band 8 (900 MHz) / LTE Band 28 (700 MHz)
UMTS/HSPA 850 MHz / 900 MHz / 1900 MHz / 2100 MHz

GPS Interface
- Receiver Types
GPS/GLONASS/Galileo
State-of-the-art GNSS solution
- Accuracy: Position: 2.0 m @CEP50
- Acquisition
Hot starts: 1.1 sec
Cold starts: 29.94 sec
- Sensitivity
Cold starts: -145 dBm
Tracking: -160 dBm
- Time Pulse: 0.25 Hz to 10 MHz

LED Indicators
- System
Power x 2
Programmable x 1
SIM card indicator x 1
- Wireless Signal Strength: Cellular/Wi-Fi x 6

Power Parameters
- No. of Power Inputs: Redundant dual inputs
- Input Voltage: 12 to 48 VDC
- Power Consumption: 10 W
- Input Current: 0.8 A @ 12 VDC

Reliability
- Alert Tools: External RTC (real-time clock)
- Automatic Reboot Trigger: External WDT (watchdog timer)

Physical Characteristics
- Dimensions: 141.5 x 120 x 39 mm (5.7 x 4.72 x 1.54 in)
- Weight: 750 g (1.65 lb)
- Housing: SECC, Metal
- IP Rating: IP30
- Installation
DIN-rail mounting
Wall mounting (with optional kit)

Environmental Limits
- Operating Temperature: -40 to 70°C (-40 to 158°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)
- Shock: IEC 60068-2-27
- Vibration: 2 Grms @ IEC 60068-2-64, random wave, 5-500 Hz, 1 hr per axis (without USB devices attached)

Standards and Certifications
- EMC: EN 55032/35, EN 61000-6-2/-6-4
- EMI: CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
- Industrial Cybersecurity: IEC 62443-4-, IEC 62443-4-2
- Hazardous Locations: Class I Division 2, ATEX, IECEx
- Carrier Approvals: Verizon, AT&T
- Safety: UL 62368-1, EN 62368-1
- Green Product: RoHS, CRoHS, WEEE

MTBF
- Time: 528,574 hrs
- Standards: Telcordia (Bellcore) Standard TR/SR