UC-8220-T-LX - Arm Cortex-A7 Dual-Core 1 GHz IIoT-Gateway mit 2 Erweiterungssteckplätzen

Die kompakten lüfterlosen Industriecomputer auf Arm-Basis von Moxa sind Wireless-fähig und verfügen über umfassende Sicherheitsfunktionen. Sie sind für platzkritische Anwendungen konzipiert. Die Computer sind speziell für den Langzeitbetrieb konzipiert und werden mit 10 Jahren Support für Moxa Industrial Linux geliefert, was sie zu einer idealen Wahl für Fernüberwachungs- und Datenerfassungsanwendungen macht.

Arm Cortex-A7 Dual-Core 1 GHz IIoT-Gateway mit 2 Erweiterungssteckplätzen für ein Wi-Fi- und LTE-Modul, 1 CAN-Port, 4 DIs, 4 DOs, -40 bis 85°C Betriebstemperatur

Computer
- CPU Armv7 Cortex-A7 dual-core 1 GHz
- DRAM 2 GB DDR3L
- Supported OS
Moxa Industrial Linux 1 (Debian 9, kernel 4.4), 2027 EOL
Moxa Industrial Linux 3 (Debian 11, kernel 5.10), 2031 EOL
See www.moxa.com/MIL
- Storage Pre-installed 8 GB eMMC
- Expansion Slots MicroSD (SD 3.0) socket x 1

Computer Interface
- Ethernet Ports Auto-sensing 10/100/1000 Mbps ports (RJ45 connector) x 2
- Serial Ports RS-232/422/485 ports x 2, software selectable (DB9 male)
- CAN Ports CAN 2.0 A/B x 1 (DB9 male)
- Digital Input DIs x 4
- Digital Output DOs x 4
- USB 2.0 USB 2.0 hosts x 1, type-A connectors
- Wi-Fi Antenna Connector RP-SMA x 2
- Cellular Antenna Connector SMA x 2
- GPS Antenna Connector SMA x 1
- Expansion Slots mPCIe slots x 2
- SIM Format Nano
- Number of SIMs 2
- Buttons Programmable button
- TPM TPM v2.0

Ethernet Interface
- Magnetic Isolation Protection 1.5 kV (built-in)

Security Functions
- Hardware-based Security
TPM 2.0
Hardware Root of Trust Secure Boot
- Intrusion Detection Host-based Intrusion Detection
- Security Tools
Security Diagnostic Tool
Security Event Auditing
Secure Update
- Disk Protection LUKS Disk Encryption
- Recovery
One-step recovery to the last known secure state
Dual-system design with automatic failback
- Reliability
Network Keep Alive
Network Failover and Failback

Serial Interface
- Baudrate 300 bps to 921.6 kbps
- Data Bits 7, 8
- Stop Bits 1, 2
- Parity None, Even, Odd, Space, Mark
- Flow Control
RTS/CTS, XON/XOFF
ADDC (automatic data direction control) for RS-485
RTS Toggle (RS-232 only)
- Console Port 1 x 4-pin header to DB9 console port

Serial Signals
- RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w Data+, Data-, GND

CAN Interface
- No. of Ports 1
- Connector DB9 male
- Baudrate 10 to 1000 kbps
- Industrial Protocols
CAN 2.0A
CAN 2.0B
- Isolation 2 kV (built-in)
- Signals CAN_H, CAN_L, CAN_GND, CAN_SHLD, CAN_V+, GND

Digital Inputs
- Connector Screw-fastened Euroblock terminal
- Dry Contact
Off: open
On: short to GND
- Isolation 3K VDC
- Sensor Type
Wet contact (NPN)
Dry contact
- Wet Contact (DI to COM)
On: 10 to 30 VDC
Off: 0 to 3 VDC

Digital Outputs
- Connector Screw-fastened Euroblock terminal
- Current Rating 200 mA per channel
- I/O Type Sink
- Voltage 24 VDC nominal, open collector to 30 VDC

Cellular Interface
- Cellular Standards LTE Cat. 4

GPS Interface
- Receiver Types
GPS/GLONASS/Galileo
State-of-the-art GNSS solution
- Accuracy Position: 2.0 m @CEP50
- Acquisition
Hot starts: 1.1 sec
Cold starts: 29.94 sec
- Sensitivity
Cold starts: -145 dBm
Tracking: -160 dBm
- Time Pulse 0.25 Hz to 10 MHz

LED Indicators
- System
Power x 2
Programmable x 1
SIM card indicator x 1
- Wireless Signal Strength Cellular/Wi-Fi x 6

Power Parameters
- No. of Power Inputs Redundant dual inputs
- Input Voltage 12 to 48 VDC
- Power Consumption 10 W
- Input Current 0.8 A @ 12 VDC

Reliability
- Alert Tools External RTC (real-time clock)
- Automatic Reboot Trigger External WDT (watchdog timer)

Physical Characteristics
- Dimensions 141.5 x 120 x 39 mm (5.7 x 4.72 x 1.54 in)
- Weight 750 g (1.65 lb)
- Housing
SECC
Metal
- IP Rating IP30
- Installation
DIN-rail mounting
Wall mounting (with optional kit)

Environmental Limits
- Operating Temperature -40 to 70°C (-40 to 158°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5 to 95% (non-condensing)
- Shock IEC 60068-2-27
- Vibration 2 Grms @ IEC 60068-2-64, random wave, 5-500 Hz, 1 hr per axis (without USB devices attached)

Standards and Certifications
- EMC
EN 55032/35
EN 61000-6-2/-6-4
- EMI CISPR 32, FCC Part 15B Class A
- EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
- Industrial Cybersecurity
IEC 62443-4-1
IEC 62443-4-2
- Hazardous Locations
Class I Division 2
ATEX
IECEx
- Carrier Approvals
Verizon
AT&T
- Safety
UL 62368-1
EN 62368-1
- Green Product RoHS, CRoHS, WEEE

MTBF
- Time 650,836 hrs
- Standards Telcordia (Bellcore) Standard TR/SR