ALFA Network APOE-48V Injector – 48 V PoE Base Unit (Injector) 802.3af Compliant

The APOE-48V Injector is a PoE injector with 48 V output voltage, the power cord is not included.

Features

• Thin and compact (38 mm thick).
• Worldwide input capability 90-264 V AC continuous
• Remote power feeding
• Centralized power distribution
• Smart Etherent wiring
• Minimal crosstalk and insertion losses
• Easy to use
• Concise LED display

• Input power requirements: AC input voltage: 90 – 264 V ac, AC frequency: 47 – 63 Hz, AC input current: 2 A at 100 V ac, 1 A at 240 V ac, (-48 V dc)
• Power over LAN output: Pin assignments and polarity: () 4/5 () 7/8
• Output voltage: Aggregate power: 50 W (48 V dc +/- 2 V)
• Efficiency: 80% typ. (at full load)
• Output current: 0 – 1 A
• Tolerance: +/-5% (combination of line, load regulation and initial set)
• Ripple & noise: 20 MHz BW 2% max.
• Protection type: OVPC lamp by Zener diode
• Short circuit without damage occur for short circuit, OCP typ. 1.2 A
• Delectric withstand: P – S 1500 V AC
• Insulation resistance: P – S more than 100 M ohm at 500 V dc.
• Operating temperature: 32°F to 104°F (0°C to 40°C)
• Operating humidity: Maximum 90% non-condensing
• Storage temperature: -13°F to 185°F (-25°C to 85°C)
• Storage humidity: Maximum 95% non-condensing
• Operating altitude: -1000 to 10,000 ft. (-304.8 to 3048 m)
• System indicator: AC power (green), power active (red) 0.05 A to 0.8 A, over current protection (red, flash) to 1.0 A
• Safety approval: UL 1950/ CSA A22.2 no. 950/ EN 60950/CB
• Dimensions: (H) 3.8 cm x (W) 10.4 cm x (D) 13.8 cm
• Weight: 0.61 kg