Banana Pi BPI-M2+(H3) – Mini Quad-Core H3 Single Board Computer

Banana Pi is an open source hardware platform. The Banana Pi model BPI-M2+ has a quad-core CPU, an Allwinner H3 chip on board and supports Wi-Fi. It’s very small with dimensions of only 65 x 65 mm. It runs Android, Debian Linux, Ubuntu Linux, the Raspbian image and other OS.

The boards hardware include: 1 GHz ARM7 quad-core processor, 1 GB DDR3 SDRAM, 8 GB eMMC Flash and an SDIO Wi-Fi & Bluetooth 4.0 module on board. It also has a Gigabit Ethernet port and can run smoothly with Android 4.4. It supports 1080P high definition videos and games as well as 4K. Its GPIO header is pin-compatible with the Raspberry Pi B+ and supports the Raspbian image.

• CPU: H3 quad-core Cortex A7 H.265/HEVC 4K
• GPU: MALI-400 MP2, runs at 600 MHz, supports OpenGL ES 2.0
• SDRAM: 1 GB DDR3 (shared with GPU)
• GPIO: 40 pins Header, 28x GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S
• Bluetooth: BT4.0
• Onboard storage: TF card (max. 64 GB) / MMC card slot, up to 2T on 2.5 SATA disk, 8 GB eMMC Flash
• Onboard network: 10/100/1000M Ethernet RJ45
• Onboard Wi-Fi: SDIO AP6212 (option AP6181, AP6335)
• Video input:
• CSI input connector camera:
• Supports 8-bit YUV422 CMOS sensor interface
• Supports CCIR656 protocol for NTSC and PAL
• Supports SM pixel camera sensor
• 4 Supports video capture solution up to 1080p (at) 30fps
• Video output:
• Supports HDMI output with HDCP
• Supports HDMI CEC
• Supports HDMI 30 function
• Integrated CVBS
• Supports simultaneous output of HDMI and CVBS
• Audio output: HDMI
• Power source: DC input
• USB 2.0 ports: 2x USB 2.0 hosts, 1x USB 2.0 OTG
• Buttons: Reset, power, uboot
• Low-level peripherals: 40 pins Header, compatible with Raspberry Pi B+
• UART GPIO (1x 3) pin: UART, ground
• LED: Power and status
• IR: IR input on board
• Supported OS: Android, Ubuntu, Debian, Raspberry Pi image
• Product size: 65 x 65 mm
• Weight: 48 g