Up to two mSATA SSDs can be connected to this converter by Delock and installed like a 2.5″ hard drive. The converter is integrated into the system via the USB interface. When using more than one SSD, it is possible to use different RAID levels.
Note
This article supports a chipset-based RAID function. The management and setting of the RAID mode is not possible via the operating system or BIOS. Various diagnostic software is not compatible with this solution.
The SMART function is not supported. JBOD is only supported on SATA controllers with port multiplier function.

Specification
– Connectors:
1 x SATA 6 Gb/s 22 pin connector
2 x mSATA Slot (full size)
– Chipset: Asmedia ASM1092R
– Form factor: 2.5″
– For 3.3 V mSATA modules
– Also suitable for half size modules
– Supports RAID 0, 1, JBOD
– RAID mode adjustable via DIP switch on board
– 1 x LED for SATA host active (green) and 2 x LED for mSATA SSD error (red)
– OS independent, no driver installation required
System requirements
– One free SATA 22 pin interface
Package contents
– Converter
– 2.5″ Enclosure
– Mounting material
Packaging
– Box