This Delock M.2 converter offers two different usage options.
1. An M.2 PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5″ hard drive. The converter can then be integrated into the system internally via the U.2 68 pin interface.
2. An M.2 SATA SSD in 2280, 2260, 2242 and 2230 format and an mSATA SSD can be connected and used as a replacement for a 2.5″ hard drive. The converter can be integrated into the system internally via the SATA Express interface.

Specification
– Connectors: 1 x U.2 SFF-8639 / SATA Express connector > 1 x 67 Pin M.2 Key M Slot, 1 x mSATA Slot (half size / full size)
– Interface: PCIe / SATA
– Form factor: 2.5″
– Supports M.2 modules in 2280, 2260, 2242 and 2230 format with Key M or Key
– B+M on SATA or PCIe basis
– Maximum height of components on the module: 1.35 mm, use of double-sided modules possible
– Supports NVM Express (NVMe) (PCIe SSD only)
– Maximum current for modules: 3 A
– Short-circuit protection, overheating protection
– ESD protection up to 2 kV
– LED display
– Dimensions (LxWxH): approx. 100 x 70 x 9.5 mm
System requirements
– Linux Kernel 3.3 or higher
– Windows 7/7-64/8.1/8.1-64/10/10-64
– One free SATA Express interface (for SATA M.2 and mSATA) or One free U.2 interface (for PCIe M.2) or
– One free SFF-8643 interface (for PCIe M.2)
Package contents
– Converter
– 2.5″ enclosure
– Mounting screws for M.2 and mSATA module, screws for enclosure
– User manual