This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD, in 2280, 2260, 2242 and 2230 format, and a 2.5″ or 3.5″ SATA HDD or SSD via the USB interface.
Clone function without PC
The integrated clone function allows you to clone storage without the use of a PC. It is possible to clone from NVMe to SATA and SATA to NVMe.

Specification
– Connectors:
1 x USB 10 Gbps USB Type-C™ socket
1 x M.2 Key M slot
1 x SATA 6 Gb/s 22 pin socket
1 x DC power socket
– Chipset: JMicron JMS581D
– Supports M.2 modules in 2280, 2260, 2242 and 2230 format with Key M or Key B+M on PCIe (NVMe) basis
– Maximum height of the components on the module: 1.5 mm, use of double-sided modules possible
– For 2.5″ and 3.5″ SATA HDDs / SSDs
– Supports NVM Express (NVMe)
– Supports S.M.A.R.T.
– Supports TRIM 5 – Supports NVM Express (NVMe) – Supports S.M.A.R.T. Supports TRIM
– Supports Native Command Queuing (NCQ)
– Data transfer rate up to 10 Gbps
– Supports UASP
– 7 x LED display for power, access and copy status
– Bootable
– Function buttons:
1 x clone button
1 x on/off switch
1 x switch for clone mode
– Dimensions (LxWxH): approx. 107 x 35 x 24 mm
– Hot Plug, Plug & Play
Power supply specification
– Plug-in power supply
– Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
– Output: 12 V / 3 A
– Ground outside, plus inside
– Dimensions:
inside: ø approx. 2.5 mm
external: ø approx. 5.5 mm
Length: approx. 10 mm
System requirements
– Android 11.0 or higher
– Chrome OS
– Linux Kernel 5.15 oder höher
– Mac OS 12.4 oder höher
– Windows 10/10-64/11
– iPad Air (4. Generation) oder höher
– iPad Pro (3. generation) or higher
– Surface Pro 7
– PC or notebook with a free USB Type-A port or
– Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or Thunderbolt™ 4 port
Package contents
– USB Type-C™ converter
– Cable USB-C™ plug to USB-C™ plug, length approx. 80 cm
– Cable USB-C™ plug to USB Type-A plug, length approx. 80 cm
– 3 x rubber nipples
– External power supply 12.0 V / 3.0 A
– Operating instructions
Packaging
– Retail box