This cable by Delock can be used to extend a DisplayPort connection and to connect various devices. The socket can be attached with two screws, e.g. to a slot bracket, a cable duct or a housing with the corresponding cut-out. In this way, it is possible to install a DisplayPort socket in an easily accessible position.

Specification
– Connectors: 1 x DisplayPort male > 1 x DisplayPort female for installation
– DisplayPort 1.4 specification
– Backward compatible to DisplayPort 1.3, 1.2 and 1.1
– Pin 20 is connected (Supports 3.3 V)
– Screw type: M3
– Screw distance: 27 mm
– Wire cross-section: 28 AWG
– Cable diameter: approx. 7 mm
– Copper cable
– Triple shielded cable
– Gold-plated contacts
– Transmission of audio and video signals
– Data transfer rate up to 32.4 Gbps
– Resolution up to (monitor with DSC support)*: 7680 x 4320 @ 60 Hz, 5120 x 2880 @ 120 Hz, 3840 x 2160 @ 240 Hz
– Resolution up to (monitor without DSC support)*: 7680 x 4320 @ 30 Hz, 5120 x 2880 @ 60 Hz, 3840 x 2160 @ 120 Hz
– Supports Display Stream Compression 1.2 (DSC)
– Supports HDR (High Dynamic Range)
– Supports HDCP 1.4 and 2.3
– Supports HBR3 (8.1 Gbps) data rate
– Up to 32 audio channels for speakers
– Up to 1536 kHz audio sampling rate
– Supports colour sampling in the formats 4:4:4, 4:2:2 and 4:2:0
– Colour: black
– Length incl. connectors: approx. 3 m – Length: approx. 2 m Length incl. connections: approx. 3 m
*depending on the system and the connected hardware

System requirements
– One free DisplayPort interface

Package contents
– DisplayPort installation cable
– 2 x screw