Functions
– The device is equipped with a twilight sensor that allows the user to set the external lighting threshold (in the range of approx. 5 to approx. 2000 lux) at which the light source is switched on after motion is detected by the sensor
– The device switches off automatically after a user-defined time when the sensor detects the last motion in the detection field. The shortest operating time is 10 seconds and the longest is 10 minutes.
– The device can be operated in one of three available modes: 100 % power -> 20 % power (you can switch this mode off) -> Off. You can set the lighting time, the time in standby mode, the speed of the detected movement and the intensity of the detected light and adjust the range of the sensor. The sensor does not switch the ceiling light on in daylight, even if movement is detected. At low light intensity, the sensor illuminates the ceiling light at 100 % power when motion is detected. Once the set time in standby mode has elapsed, the ceiling light switches off automatically.

Technical specifications
– Microwave motion sensor and LED power supply (with dimmer), range 2 m-8 m
– Power source: 220-240 V/AC
– Detection angle: 360°
– Light intensity: 5 lux, 15 lux, 50 lux, 2000 lux (selectable)
– Hold time: 10 s, 90 s, 3 min, 10 min
– Output voltage: 35-60 V/DC
– Motion detection speed: 0.6-1.5 m/s
– Power consumption: 0.9 W
– Standby intensity: 20 %
– Frequency: 50/60 Hz
– Energy transfer <0.2 mW
– Detection distance: 2-8 m adjustable.
– RF system: 5.8 GHz CW radar, ISM band
– Installation height: 2-4 m
– Standby period: 0 s, 30 s, 10 min, +? (optional)
– Detection range 10/50/75/100 % selectable
– Output current: 300mA