The product is characterised by its high sensitivity, which is achieved through the use of an integrated circuit. It combines automation, user-friendliness, safety, energy saving and practical functions. The device uses the infrared radiation emitted by a person as a signal to go into operation when a person enters the detection area. It automatically recognises day and night and is easy to install and operate.

Please note: The 1OS short signal mode means that the device switches on after 1 second and switches off again after 9 seconds.

Technical data
– Power supply: 220-240V/AC
– Detection angle 180°
– Mains frequency: 50/60Hz
– Detection range: 12m max (<24°C)
– Light intensity: <3-2000LUX (adjustable)
– Time delay: Min.10sec±3sec / Max.30min±3min
– Operating temperature: -20/+40°C
– Operating humidity: <93%RH
– Power consumption: ~0.5W
– Max. Load: for incandescent bulbs 1200W/ 300W for energy saving bulbs
– Mounting height: 1.8-2.5m
– Motion detection speed: 0.6-1.5m/s
– Detection range: 50/75/100% (selectable)

The set contains
– Infrared motion detector with remote control IP65, max 800W (incandescent bulb), max 1200W (LED) MCE241 Maclean Energy
– Remote control
– User manual
– Original packaging
– Proof of purchase

REMOTE CONTROL:
ON – switch on, return to AUTO mode after 8h
OFF – switch off, return to AUTO mode after 8 hours
AUTO – automatic setting depending on movement
100%/75%/50% – setting the detection range
10/50/150/2000LUX – setting the LUX sensitivity range
EYE – automatically reads the current ambient brightness and the sensor operates according to the stored LUX value, Range 3-2000 LUX
1min-30min Setting the time delay
1OS – Short signal mode means that the voltage starts the device after 1s and stops after 9s.
TEST – Test mode
LOCK – Locks and unlocks the buttons on the remote control
RESET – The sensor operates according to the setting of the rotary knob

Features
– Infrared motion detector with remote control IP65, max. 800W (incandescent lamp), max. 1200W (LED) MCE241 Maclean Energy
– Convenient control via the supplied remote control
– The device distinguishes between day and night
– The user can set the operation of the device depending on the ambient light
– The device can work both during the day and at night if it is set to the “sun” (max) position
– It can also work in environments with less than 3 LX if the device is set to the “moon” position.
– For the setting pattern, see setting pattern. For the setting pattern, see the test diagram
– The time delay is added continuously