RBD53iG-5HacD2HnD – hAP ac3 with 4-core 716 MHz CPU, 256 MB RAM

Forget about endless searching for the perfect router and scrolling through an eternity of reviews and specifications! MikroTik have created a single affordable home access point that has all the features you might need for years to come.

Is your old router struggling to reach every corner of your home? Well, forget about that! MikroTik have included external high gain wireless antennas with outstanding coverage. Only strong and stable wireless connection in every room from now on!

With 5 Gigabit Ethernet ports, 256 MB of RAM and quad-core CPU, hAP ac3 can satisfy even the biggest and most demanding households. With PoE support, it can power or be powered by other devices. There is a 128 MB NAND and a full-size USB port that you can use to add extra storage. The new enclosure allows mounting the device vertically or horizontally. A wall mount set is also included.

Included parts

• 24 V, 1.5 A power adapter
• Base leg and pads
• K-47 fastening set
• HGO indoor antenna kit

• Product code: RBD53iG-5HacD2HnD
• CPU: 4 core IPQ-4019 716 MHz
• Number of 1 GbE ports: 5
• Number of 1 GbE ports with PoE-out: 1
• Size of RAM: 256 MB
• Size of NAND: 128 MB
• Wireless: 2.4 GHz 802.11 b/g/n dual-chain, 5 GHz 802.11 a/n/ac dual-chain
• Wireless regulations: Specific frequency range and power will be limited by country regulations
• Wireless antenna max. gain: 2.4 GHz (3 dBi), 5 GHz (5.5 dBi)
• Antenna beam width: 360°
• Dimensions: 251 x 129 x 39 mm
• Operating system: RouterOS, license level 4
• USB port: 1x USB port type A
• Operating temperature: -40°C to +70°C
• Certification CE, FCC, IC

Powering

• PoE-in: Passive PoE
• PoE-out*: Passive PoE
• Supported input voltage: DC jack (12-28 V), PoE-in (18-28 V)
• Power adapter nominal voltage: 24 V
• Power adapter nominal current: 1.5 A
• Max. out per port output (input <30 V): 0.5 A
• Max. power consumption without attachments: 12 W
• Max. power consumption: 30 W

* If PoE-out is used, then input voltage (DC jack, PoE-in) should be > = 24 V