802.11a/b/g/n access point, EU band, -40 to 75°C operating temperature

WLAN interface
– WLAN standards: 802.11a/b/g/n; 802.11i Wireless security
– Modulation type: DSSS; OFDM; MIMO-OFDM
– Frequency band for EU (20 MHz operating channels):
– 2.412 to 2.472 GHz (13 channels)
– 5.180 to 5.240 GHz (4 channels)
– 5.260 to 5.320 GHz (4 channels)
– 5.500 to 5.700 GHz (11 channels)

Wireless security:
– WEP encryption (64-bit and 128-bit)
– WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
– WPA/WPA2-Personal

Transmission rate:
– 802.11b: 1 to 11 Mbps
– 802.11a/g: 6 to 54 Mbps
– 802.11n: 6.5 to 300 Mbps

Transmission power for 802.11a:
– 23±1.5 dBm @ 6 to 24 Mbps
– 21±1.5 dBm @ 36 Mbps
– 20±1.5 dBm @ 48 Mbps
– 18±1.5 dBm @ 54 Mbps

Transmission power for 802.11n (5 GHz):
– 23±1.5 dBm @ MCS0/8 20 MHz
– 18±1.5 dBm @ MCS7/15 20 MHz
– 23±1.5 dBm @ MCS0/8 40 MHz
– 17±1.5 dBm @ MCS7/15 40 MHz

Transmission power for 802.11b:
– 26±1.5 dBm @ 1 Mbps
-26±1.5 dBm @ 2 Mbps
– 26±1.5 dBm @ 5.5 Mbps
– 25±1.5 dBm @ 11 Mbps

Transmission power for 802.11g:
– 23±1.5 dBm @ 6 to 24 Mbps
– 21±1.5 dBm @ 36 Mbps
– 19±1.5 dBm @ 48 Mbps
– 18±1.5 dBm @ 54 Mbps

Transmission power for 802.11n (2.4 GHz):
– 23±1.5 dBm @ MCS0/8 20 MHz
– 18±1.5 dBm @ MCS7/15 20 MHz
– 23±1.5 dBm @ MCS0/8 40 MHz
– 17±1.5 dBm @ MCS7/15 40 MHz

Reception sensitivity for 802.11a (measured at 5.680 GHz):
– Typ. -90 @ 6 Mbps
– Typ. -88 @ 9 Mbps
– Typ. -88 @ 12 Mbps
– Typ. -85 @ 18 Mbps
– Typ. -81 @ 24 Mbps
– Typ. -78 @ 36 Mbps
– Type. -74 @ 48 Mbps
– Type. -72 @ 54 Mbps

Note: Due to a limitation in receiver sensitivity performance for channels 153 and 161, it is recommended not to use these channels in your critical applications.

Receiver sensitivity for 802.11n (5 GHz; measured at 5.680 GHz):
– Type. -69 dBm @ MCS7 20 MHz
– Typ. -71 dBm @ MCS15 20 MHz
– Typ. -63 dBm @ MCS7 40 MHz
– Typ. -68 dBm @ MCS15 40 MHz

Note: Due to a limitation in receiver sensitivity performance for channels 153 and 161, it is recommended not to use these channels in your critical applications.

Receiver sensitivity for 802.11b (measured at 2.437 GHz):
– Typ. -93 dBm @ 1 Mbps
– Type. -93 dBm @ 2 Mbps
– Typ. -93 dBm @ 5.5 Mbps
– Typ. -88 dBm @ 11 Mbps

Reception sensitivity for 802.11g (measured at 2.437 GHz):
– Typ. -88 dBm at 6 Mbps
– Typ. -86 dBm @ 9 Mbps
– Typ. -85 dBm @ 12 Mbps
– Typ. -85 dBm @ 18 Mbps
– Typ. -85 dBm @ 24 Mbps
– Typ. -82 dBm @ 36 Mbps
– Type. -78 dBm @ 48 Mbps
– Type. -74 dBm @ 54 Mbps

Reception sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz):
– Typ. -70 dBm @ MCS7 20 MHz
– Typ. -69 dBm @ MCS15 20 MHz
– Typ. -67 dBm @ MCS7 40 MHz
– Typ. -67 dBm @ MCS15 40 MHz
– WLAN operating mode: Access point, client, sniffer
– Antenna: External, 2/2 dBi, omnidirectional
– Antenna connections: 2 RP-SMA sockets

Ethernet interface
Standards:
– IEEE 802.3 for 10BaseT
– IEEE 802.3u for 100BaseT(X)
– IEEE 802.3ab for 1000BaseT(X)
– IEEE 802.1X for authentication
– 10/100/1000BaseT(X) ports (RJ45 connection): 1

Ethernet software functions
– Management: DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search – Utility, MXview, MXview Wireless, MXconfig
– Security: HTTPS/SSL, RADIUS, SSH
– Time management: SNTP client

Firewall
– Filter: ICMP, MAC address, IP protocol, port-based

Serial interface
– Console connection: RS-232, 8-pin RJ45

LED interface
– LED indicators: PWR, FAULT, STATE, SIGNAL, WLAN, LAN

Input/output interface
– Buttons: Reset button

Physical properties
– Housing: metal
– IP protection class: IP30
– Dimensions: 58 x 115 x 70 mm (2.29 x 4.53 x 2.76 in)
– Weight: 307 g (0.68 lb)
– Mounting: DIN rail mounting, wall mounting (with optional kit)

Power parameters
– Input current: 0.56 A @ 12 VDC, 0.14 A @ 48 VDC
– Input voltage: 12 to 48 VDC
– Power connection: 1 detachable 4-contact terminal block(s)
– Power consumption: 6.96 W (max.)
– Reverse polarity protection: Supports

Environmental conditions
– Operating temperature: -40 to 75°C (-40 to 167°F)
– Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
– Ambient relative humidity: 5 to 95% (non-condensing)

Standards and certifications
– EMC: EN 55032/24
– EMI: CISPR 32, FCC Part 15B Class A

EMS:
– IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
– IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
– IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
– IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
– IEC 61000-4-6 CS: 3 V
– IEC 61000-4-8 PFMF
– Radio: EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, MIC, NCC, RCM, SRRC, WPC, KC, ANATEL
– Safety: EN 60950-1, UL 60950-1
– Vibration: IEC 60068-2-6

MTBF
– Time: 749,476 hours
– Standards: Telcordia SR332