8 FE copper and 2 GbE SFP multiport industrial router with firewall/NAT, 12/24/48 VDC input voltage, -10 to 60°C operating temperature, conformal coating

Input/Output Interface
Alarm contact channels: Resistive load: 1 A @ 24 VDC
Buttons: Reset button
Digital input channels: +13 to +30 V for state 1; -30 to +3 V for state 0; Max. Input current: 8 mA

Ethernet interface
10/100BaseT(X) ports (RJ45 connection): 8
1000BaseSFP slots: 2
Standards:
– IEEE 802.3 for 10BaseT
– IEEE 802.3u for 100BaseT(X)
– IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
– IEEE 802.3x for flow control
– IEEE 802.1Q for VLAN tagging
– IEEE 802.1X for authentication
– Static Port Trunk
DMZ: User-configurable DMZ ports

Ethernet software functions
Broadcast Forwarding: IP controlled broadcast, broadcast forwarding
Management:
– Back Pressure Flow Control
– DDNS
– DHCP Server/Client
– Web Console (HTTP/HTTPS)
– LLDP
– QoS/CoS/ToS
– SNMPv1/v2c/v3
– Telnet
– TFTP
– HTTPS
– SSH
Redundancy protocols: RSTP; STP; Turbo Ring v2; Turbo Chain
Routing throughput: Max. 50K packets per second / 500 Mbps (based on RFC 2544)
Routing table: Max. 4K routing rules
Simultaneous connections: Max. 120K (based on RFC 3511)
Connections per second: Max. Max. 6K (based on RFC 3511)
Routing redundancy: VRRP
Security: Secure Boot; IPsec; L2TP (server); RADIUS; Trust Access Control; TACACS+
Time management: NTP server/client; SNTP
Unicast routing: OSPF; RIPV1/V2; Static route
Multicast routing: Static route
Filter: IGMP v1/v2/v3

Switch properties
VLAN ID range: VID 1 to 4094
IGMP groups: 256
Max. Max. number of VLANs: 16

LED interface
LED indicators: PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB

DoS and DDoS protection
Technology:
– ARP-Flood
– FIN Scan
– ICMP Flood
– TCP Sessions Without SYN
– NMAP-ID Scan
– NMAP-Xmas Scan
– Null Scan
– SYN/FIN Scan
– SYN/RST Scan
– SYN-Flood
– Xmas Scan

Firewall
Filter:
– DDoS
– Ethernet protocols
– ICMP
– IP address
– MAC address
– Ports
Stateful Inspection: Router Firewall; Transparent (Bridge) Firewall
Deep Packet Inspection:
– Modbus TCP
– Modbus UDP
– DNP3
– IEC 60870-5-104
– IEC 61850 MMS
– EtherNet/IP
– Omron FINS
– Siemens S7 Comm.
– Further protocols will be supported by future firmware updates.
Intrusion Prevention System: Requires an additional licence.
Throughput: Firewall: Max. 50K packets per second / 500 Mbps (based on RFC 2544)

IPsec VPN
Authentication: MD5 and SHA (SHA-256); RSA (key size: 1024-bit, 2048-bit); X.509 v3 certificate
Simultaneous VPN tunnels: Max. 50 IPsec VPN tunnels
Encryption: DES; 3DES; AES-128; AES-192; AES-256
Protocols: IPsec; L2TP (server); PPTP (client)
Throughput: Conditions: AES-256, SHA-256; Max. 25K packets per second / 200 Mbps (based on RFC 2544)

NAT
Features: 1-to-1; N-to-1; port forwarding; NAT loopback

Real-time firewall/VPN event protocol
Event type: Firewall event; VPN event
Media: Local storage; SNMP trap; Syslog server

Serial port
Console port: RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
Port: USB Type-C

Performance parameters
Connection: Removable terminal block
Operating voltage: 9.6 to 60 VDC
Input voltage: 12/24/48 VDC, redundant dual inputs (DNV-certified for 24 VDC)
Input current: 0.53 A @ 12 VDC; 0.26 A @ 24 VDC; 0.14 A @ 48 VDC
Reverse polarity protection: Supports

Physical properties
Housing: Metal
Dimensions: 45 x 135 x 105 mm (1.77 x 5.31 x 4.13 in)
Weight: 520 g (1.15 lb)
Mounting: DIN rail mount (DNV certified); wall mount (with optional kit)

Environmental conditions
Operating temperature: -10 to 60°C (14 to 140°F)
Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
Ambient relative humidity: 5 to 95% (non-condensing)

Standards and certifications
Safety: IEC 62368-1; UL 62368-1
EMC: EN 55032/35
EMI: CISPR 32, FCC Part 15B Class A
EMS:
– IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
– IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
– IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
– IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
– IEC 61000-4-6 CS: 10 V
– IEC 61000-4-8 PFMF
Railway: EN 50121-4
Traffic control: NEMA TS2
Marine: IEC 60945; DNV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Substations: IEC 61850-3 Edition 2.0; IEEE 1613
Hazardous areas: ATEX; Class I Division 2; IECEx

MTBF
Time: 1,347,225 hours
Standards: Telcordia (Bellcore), GB