Moxa’s EDR series industrial security routers protect the control networks of critical equipment while ensuring fast data transmission. Designed specifically for automation networks, they are integrated cybersecurity solutions that combine an industrial firewall, VPN, router and L2 switching capabilities in a single product that protects the integrity of remote access and critical equipment.

8 FE Copper and 2 GbE SFP Multiport Industrial Secure Router with Firewall/NAT, 12/24/48 VDC input voltage, -40 to 75°C operating temperature

Input/Output Interface
– Alarm contact channels Resistance load: 1 A @ 24 VDC
– Buttons Reset button
– Digital input channels
+13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA Input current: 8 mA

Ethernet interface
– 10/100BaseT(X) ports (RJ45 connection) 8
– 1000BaseSFP slots 2
– Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for flow control
IEEE 802.1Q for VLAN tagging
IEEE 802.1X for authentication
Static Port Trunk
– DMZ User-configurable DMZ ports

Ethernet software functions
– Broadcast ForwardingIP-controlled broadcast, Broadcast Forwarding
– Management
Back Pressure Flow Control
DDNS
DHCP Server/Client
Web Console (HTTP/HTTPS)
LLDP
QoS/CoS/ToS
SNMPv1/v2c/v3
Telnet
TFTP
HTTPS
SSH
– Redundancy Protocols Redundancy protocols
RSTP
STP
Turbo Ring v2
Turbo Chain
– Routing throughputMax. 50K packets per second / 500 Mbps (based on RFC 2544)
– Routing table Max. 4K routing rules
– Simultaneous connections Max. 120K (based on RFC 3511)
– Connections per second Max. Max. 6K (based on RFC 3511)
– Routing RedundancyVRRP
– Security
Secure Boot
IPsec
L2TP (Server)
RADIUS
Trust Access Control
TACACS+
– Time Management
NTP Server/Client
SNTP
– Unicast Routing Unicast Routing
OSPF
RIPV1/V2
Static Route
– Multicast RoutingStatic Route
– Filter IGMP v1/v2/v3

Switch Properties
– VLAN ID Range VID 1 to 4094
– IGMP Groups 256
– Max. Max. number of VLANs 16

LED interface
– LED indicators PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB

DoS and DDoS protection
– Technology
ARP flood
FIN scan
ICMP flood
TCP sessions without SYN
NMAP-ID scan
NMAP-Xmas Scan
Null Scan
SYN/FIN Scan
SYN/RST Scan
SYN-Flood
Xmas Scan

Firewall
– Filter
DDoS
Ethernet Protocols
ICMP
IP-Address
MAC Address
Ports
– Stateful Inspection
Router Firewall
Transparent (Bridge) Firewall
– Deep Packet Inspection
Modbus TCP
Modbus UDP
DNP3
IEC 60870-5-104
IEC 61850 MMS
EtherNet/IP
Omron FINS
Siemens S7 Comm.
Further protocols will be supported by future firmware updates.
– Intrusion Prevention System Requires an additional licence.
– Throughput
Firewall:
Max. 50K packets per second / 500 Mbps (based on RFC 2544)

IPsec VPN
– Authentication
MD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit)
X.509 v3 Certificate
– Simultaneous VPN tunnels Max. 50 IPsec VPN tunnels
– Encryption
DES
3DES
AES-128
AES-192
AES-256
– Protocols
IPsec
L2TP (server)
PPTP (client)
– Throughput
Conditions: AES-256, SHA-256
Max. 25K packets per second / 200 Mbps (based on RFC 2544)

NAT
– Functions
1-to-1
N-to-1
Port forwarding
NAT Loopback

Real-Time Firewall / VPN Event Log
– Event Type Event type
Firewall event
VPN event
– Media
Local storage
SNMP trap
Syslog server

Serial interface
– Console PortRS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
– USB Type-C connection

Performance parameters
– Removable terminal block connection
– Operating voltage 9.6 to 60 VDC
– Input voltage 12/24/48 VDC, redundant dual inputs (DNV-certified for 24 VDC)
– Input current
0.53 A @ 12 VDC
0.26 A @ 24 VDC
0.14 A @ 48 VDC
– Reverse polarity protection is supported

Physical characteristics
– Housing metal
– Dimensions 45 x 135 x 105 mm (1.77 x 5.31 x 4.13 in)
– Weight 520 g (1.15 lb)
– Installation
DIN rail mounting (DNV certified)
Wall mounting (with optional kit)

Environmental conditions
– Operating temperature -40 to 75°C (-40 to 167°F)
– Storage temperature (including packaging)- 40 to 85°C (-40 to 167°F) (including packaging)40 to 85°C (-40 to 185°F)
– Relative humidity 5 to 95% (non-condensing)

Standards and certifications
– Safety
IEC 62368-1
UL 62368-1
– EMC EN 55032/35
– EMI CISPR 32, FCC Part 15B Class A
– EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
– Railway EN 50121-4
– Traffic control NEMA TS2
– Marine
IEC 60945
DNV
– Shock IEC 60068-2-27
– Free fall IEC 60068-2-32
– Vibration IEC 60068-2-6
– Substation
IEC 61850-3 Edition 2.0
IEEE 1613
– Hazardous areas
ATEX
Class I Division 2
IECEx

MTBF
– Time 1,347,225 hrs.
– Standards Telcordia (Bellcore), GB