Moxa’s managed Layer 2 switches are characterised by industrial-grade reliability, network redundancy and security features based on the IEC 62443 standard. We offer robust, industry-specific products with multiple industry certifications, such as parts of the EN 50155 standard for railway applications, IEC 61850-3 for energy automation systems and NEMA TS2 for intelligent transport systems.

Managed Ethernet switch with 6 10/100BaseT(X) ports, 2 100BaseFX multimode ports with ST connectors, dual power supply 12/24/48 VDC, -10 to 60°C operating temperature

Ethernet interface
– 10/100BaseT(X) ports (RJ45 connector)
6
Automatic speed negotiation
Full/half-duplex mode
Automatic MDI/MDI-X connection
– 100BaseFX ports (multi-mode ST connector)
2
– Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for flow control
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1X for authentication

Ethernet Software Features
– Filter
GMRP
GVRP
GARP
802.1Q VLAN
IGMP Snooping v1/v2/v3
IGMP Querier
– Management
IPv4/IPv6
Flow Control
Back Pressure Flow Control
DHCP Server/Client
ARP
RARP
LLDP
Port Mirror
Linkup Delay
SMTP
SNMP Trap
SNMP Inform
SNMPv1/v2c/v3
RMON
TFTP
SFTP
HTTP
HTTPS
Telnet
Syslog
Private MIB
– MIB
P-BRIDGE MIB
Q-BRIDGE MIB
IEEE8021-SPANNING-TREE-MIB
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
SNMPv2-MIB
RMON MIB Groups 1, 2, 3, 9
– Redundancy Protocols
STP
RSTP
Turbo Ring v2
Turbo Chain
Ring Coupling
Dual-Homing
Link Aggregation
MSTP
– Security
Protection against Broadcast Storms
Rate Limiting
Trusted Access Control
Static Port Blocking
MAC Sticky
HTTPS/SSL
SSH
RADIUS
TACACS+
Access Control List
Login and Password Policy and Password Policy
– Time Management
SNTP
NTP Server/Client
NTP Authentication
– Protocols
IPv4/IPv6
TCP/IP
UDP
ICMP
ARP
RARP
TFTP
DNS
NTP Client
DHCP Server
DHCP Client
802.1X
QoS
HTTPS
HTTP
Telnet
SMTP
SNMPv1/v2c/v3
RMON
Syslog

Switch properties
– MAC table size 16 K
– Jumbo frame size 9,216 KB
– Max. No. of VLANs 256
– VLAN ID range VID 1 to 4094
– IGMP groups 512
– Priority queues 4
– Packet buffer size1 MB

LED interface
– LED indicators PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC

Serial interface
– Console connectionRS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

USB interface
– USB connection USB type A (reserved)

Input/output interface
– Alarm contact channels1, relay output with a current carrying capacity of 1 A @ 24 VDC
– Digital input channels 1
– Digital inputs
+13 to +30 V for status 1
-30 to +3 V for status 0
Max. input current: 8 mA –Inputcurrent: 8 mA Input current: 8 mA
– Reset button

DIP switch configuration
– DIP switch Turbo Ring, Master, Coupler, Reserve

Power parameters
– Connection 2 detachable 4-contact terminal block(s)
– Pre-installed power module PWR-100-LV
– Note
The EDS-4008 series supports modular power supplies. The model names and power parameters are determined by the installed power module.

Example:
EDS-4008-T + PWR-100-LV = EDS-4008-LV-T
EDS-4008-T + PWR-105-HV-I = EDS-4008-HV-T

If you install a different power module, refer to the specifications of the corresponding
model. For example, if you replace the power module of the EDS-4008-LV-T
with the PWR-105-HV-I, observe the specifications of the EDS-4008-HV-T.
– Input voltage
12/24/48 VDC
Redundant double inputs
– Operating voltage 9.6 to 60 VDC
– Input current 12-48 VDC, 1.50-0.40 A or 24 VDC, 0.70 A
– Power consumption (max.) 8.45 W
– Overload current protection supported
– Reverse polarity protection supported

Physical properties
– Protection class IP40
– Dimensions 55 x 140 x 132 mm (2.17 x 5.51 x 5.2 in)
– Weight 810 g (1.79 lb)
– Installation
DIN rail mounting
Wall mounting (with optional kit)
– Metal housing

Ambient conditions
– Operating temperature -10 to 60°C (14 to 140°F)
– Storage temperature (including packaging) -40 to 85°C (-40 to 185°F)
– Relativeambienthumidity Ambient relative humidity5 to 95% (non-condensing)

Standards and certifications
– Industrial cyber security
IEC 62443-4-1
IEC 62443-4-2
– Safety
UL 61010-2-201
EN 62368-1 (LVD)
– EMC
EN 55032/35
EN 61000-6-2/-6-4
– EMICISPR 32, FCC Part 15B Class A
– EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
– Marine
LR
DNV
ABS
NK
– Vibration IEC 60068-2-6
– Shock IEC 60068-2-27
– Free fall IEC 60068-2-32
– Railway EN 50121-4
– Traffic monitoringNEMA TS2
– Substations
IEC 61850-3
IEEE 1613 Class 1
– Hazardous areas
ATEX
IECEx
Class I Division 2

MTBF
– Time 1.015,718 hours
– Standards Telcordia SR332