Managed Ethernet switch with 8 10/100BaseT(X) ports, dual power supply 12/24/48 VDC, -10 to 60°C operating temperature

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)
– 8
– Auto negotiation speed
– Full/Half duplex mode
– Auto MDI/MDI-X connection
Standards
– IEEE 802.3 for 10BaseT
– IEEE 802.3u for 100BaseT(X) and 100BaseFX
– IEEE 802.3ab for 1000BaseT(X)
– IEEE 802.3z for 1000BaseX
– IEEE 802.3x for flow control
– IEEE 802.3ad for Port Trunk with LACP
– IEEE 802.1Q for VLAN Tagging
– IEEE 802.1D-2004 for Spanning Tree Protocol
– IEEE 802.1w for Rapid Spanning Tree Protocol
– IEEE 802.1p for Class of Service
– IEEE 802.1X for authentication

Ethernet Software Features

Industrial Protocols
– EtherNet/IP
– Modbus TCP
– PROFINET IO Device
Management
– IPv4/IPv6
– Flow control
– Back Pressure Flow Control
– DHCP Server/Client
– ARP
– RARP
– LLDP
– Fiber check
– Port Mirroring (SPAN, RSPAN)
– Linkup Delay
– SMTP
– SNMP Trap
– SNMP Inform
– SNMPv1/v2c/v3
– RMON
– TFTP
– SFTP
– HTTP
– HTTPS
– Telnet
– Syslog
– Private MIB
Filter
– GMRP
– GVRP
– GARP
– 802.1Q VLAN
– IGMP Snooping v1/v2/v3
– IGMP Querier
Redundancy Protocols
– STP
– RSTP
– Turbo Ring v2
– Turbo Chain
– Ring Coupling
– Dual-Homing
– Link Aggregation
– MSTP
– MRP
Security
– Broadcast storm protection
– Rate Limit
– Trust access control
– Static Port Lock
– MAC Sticky
– HTTPS/SSL
– SSH
– RADIUS
– TACACS+
– Access control list
– Login and Password Policy
– DHCP Snooping
Time Management
– SNTP
– NTP Server/Client
– NTP Authentication
– IEEE 1588v2 PTP (hardware-based)
– Supported power profiles: IEEE 1588 Default 2008, IEC 61850-9-3-2016, IEEE C37.238-2017
Protocols
– IPv4/IPv6
– TCP/IP
– UDP
– ICMP
– ARP
– RARP
– TFTP
– DNS
– NTP Client
– DHCP Server
– DHCP Client
– 802.1X
– QoS
– HTTPS
– HTTP
– Telnet
– SMTP
– SNMPv1/v2c/v3
– RMON
– Syslog
MIB
– P-BRIDGE MIB
– Q-BRIDGE MIB
– IEEE8021-SPANNING-TREE-MIB
– IEEE8021-PAE-MIB
– IEEE8023-LAG-MIB
– LLDP-EXT-DOT1-MIB
– LLDP-EXT-DOT3-MIB
– SNMPv2-MIB
– RMON MIB Groups 1, 2, 3, 9

Switch Properties

MAC Table Size
– 16 K
Jumbo Frame Size
– 9.216 KB
Max. No. of VLANs
– 256
VLAN ID Range
– VID 1 to 4094
IGMP Groups
– 512
Priority Queues
– 4
Packet Buffer Size
– 1 MB

LED Interface

LED Indicators
– PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC

Serial Interface

Console Port
– RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

USB Interface

USB Connector
– USB Type A (Reserved)

Input/Output Interface

Alarm Contact Channels
– 1, Relay output with current carrying capacity of 1 A @ 24 VDC
Digital Input Channels
– 1
Digital Inputs
– +13 to +30 V for state 1
– -30 to +3 V for state 0
– Max. input current: 8 mA
Buttons
– Reset button

DIP Switch Configuration

DIP Switches
– Turbo Ring, Master, Coupler, Reserve

Power Parameters

Connection
– 2 removable 4-contact terminal block(s)
Pre-installed Power Module
– PWR-100–LV
Note
– The EDS-4008 Series supports modular power supplies. The model names and power parameters are determined by the installed power module.
For example:
EDS-4008-T + PWR-100–LV = EDS-4008-LV-T
EDS-4008-T + PWR-105-HV-I = EDS-4008-HV-T
If you install a different power module, refer to the specifications of the corresponding
model. For example, if you replace the power module of the EDS-4008–LV-T
with the PWR-105–HV-I, refer to the specifications of the EDS-4008–HV-T.
Input Voltage
– 12/24/48 VDC
– Redundant dual inputs
Operating Voltage
– 9.6 to 60 VDC
Input Current
– 12-48 VDC, 1.50-0.40 A or 24 VDC, 0.70 A
Power Consumption (Max.)
– 7.20 W
Overload Current Protection
– Supported
Reverse Polarity Protection
– Supported

Physical Characteristics

IP Rating
– IP40
Dimensions
– 55 x 140 x 120 mm (2.17 x 5.51 x 4.72 in)
Weight
– 857 g (1.89 lb)
Installation
– DIN-rail mounting
– Wall mounting (with optional kit)
Housing
– Metal

Environmental Limits

Operating Temperature
– -10 to 60°C (14 to 140°F)
Storage Temperature (package included)
– -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
– 5 to 95% (non-condensing)

Standards and Certifications

Industrial Cybersecurity
– IEC 62443-4-1
– IEC 62443-4-2
Safety
– UL 61010-2-201
– EN 62368-1 (LVD)
EMC
– EN 55032/35
– EN 61000-6-2/-6-4
EMI
– CISPR 32, FCC Part 15B Class A
EMS
– IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
– IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
– IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
– IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
– IEC 61000-4-6 CS: 10 V
– IEC 61000-4-8 PFMF
Maritime
– LR
– ABS
– NK
– DNV
Vibration
– IEC 60068-2-6
Shock
– IEC 60068-2-27
Freefall
– IEC 60068-2-32
Railway
– EN 50121-4
Traffic Control
– NEMA TS2
Power Substation
– IEC 61850-3
– IEEE 1613 Class 1
Hazardous Locations
– Class I Division 2
– ATEX
– IECEx

MTBF

Time
– 1,121,399 hrs
Standards
– Telcordia SR332