Introduction
The EDS-P206A-4PoE switches are intelligent, unmanaged 6-port Ethernet switches that support PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power supply equipment (PSE) and when used in this way, the EDS-P206A-4PoE switches enable centralisation of the power supply and provide up to 30 watts of power per port.

The switches can be powered by IEEE 802.3af/at compliant power devices (PD), so no additional cabling is required. The switches support IEEE 802.3/802.3u/802.3x with 10/100M, full/half duplex, MDI/MDI-X auto-sensing and thus offer an economical solution for your industrial Ethernet network.

EDS-P206A-4PoE-MM-ST
– EDS-P206A series
Unmanaged Ethernet switch with 4 PoE ports, 2 100BaseFX multimode ports with ST connectors, -10 to 60 °C operating temperature

Ethernet interface
-100BaseFX ports (multi-mode ST connectors): 2
PoE ports (10/100BaseT(X), RJ45 connector): 4. Automatic speed negotiation, full/half duplex mode, automatic MDI/MDI-X connection
-Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3af/at for PoE/PoE+ output
IEEE 802.3x for flow control
IEEE 802.3u for 100BaseT(X)
-PoE Pinout: V+, V+, V-, V- for Pins 1, 2, 3, 6 (Endspan, MDI, Mode A)
-Optical Fibre

Switch Features
– Packet Buffer Size: 768 kbits
– MAC Table Size: 2 K
– Processing Type: Store and Forward

Performance Parameters
-Input Current: 5.55 A @ 24 VDC
-Connection: 1 detachable 4-contact terminal block(s)
-Operating Voltage: 12 to 57 VDC
-Input Voltage: 12/24/48 VDC, redundant dual inputs
-Power Consumption:
Max. 120 W for total PD consumption
Max. 30 W for each PoE port
-Power consumption (max.): Max. 13.2 W at full load without the consumption of the PDs
-Reverse polarity protection: Supported
-Overload protection: Supported

Physical properties
Housing: Metal
IP protection class: IP30
Dimensions: 50.3 x 114 x 70 mm (1.98 x 4.53 x 2.76 in)
Weight: 375 g (0.83 lb)
Mounting: DIN rail mounting, wall mounting (with optional kit)

Environmental conditions
Operating temperature: -10 to 60°C (14 to 140°F)
Storage temperature (including packaging):-40 to 85°C (-40 to 185°F)
Ambient relative humidity: 5 to 95% (non-condensing)

Standards and certifications
-EMI: CISPR 32, FCC Part 15B Class A
-EMC: EN 55032/24
-EMS:
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
-Safety: UL 508
-Shock: IEC 60068-2-27
-Free fall: IEC 60068-2-31
-Vibration: IEC 60068-2-6

MTBF
Time: 1.289,258 hours
Standards: Telcordia (Bellcore), GB