Moxa’s PoE injectors combine power and data over a single Ethernet cable and offer devices without a PoE power source (PSE) the ability to power powered devices (PD).

Gigabit PoE+ injector with high performance, max. power of 36W/60W at 2-pair/4-pair mode. Power of 36W/60W at 24 or 48 VDC in 2-pair/4-pair mode, operating temperature from 0 to 60°C

Ethernet interface
– 10/100/1000BaseT(X) ports (RJ45 connector)
1
Full/half-duplex mode
Auto MDI/MDI-X connection
Auto negotiation speed
– PoE ports (10/100/1000BaseT(X), RJ45 connection)
1
Full/half-duplex mode
Auto-MDI/MDI-X connection
Automatic negotiation speed
– PoE pinout
Standard: V+, V+, V-, V- for pins 4, 5, 7, 8 (Midspan, MDI, Mode B)
Custom DIP switch setting: V+, V+, V-, V- for pins 1, 2, 3, 6 (Endspan, MDI, Mode A)
– Standards
IEEE 802.3 for 10BaseT
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3af/at for PoE/PoE+ output
IEEE 802.3u for 100BaseT(X)

Performance parameters
– Input voltage 24/48 VDC
– Operating voltage 22 to 57 VDC
– Input current 2.71 A @ 24 VDC
– Power consumption (max.) Max. 5.29 W at full load without consumption of the PDs
– Power budget
Max. 60 W for the entire PD consumption
Max. 60 W for each PoE port
– Connection 1 detachable 4-contact terminal block(s)
– Overload current protection supported
– Reverse polarity protection supported

Physical characteristics
– Housing metal
– IP protection class IP30
– Dimensions 30 x 115 x 78.8 mm (1.19 x 4.53 x 3.10 in)
– Weight 245 g (0.54 lb)
– Installation
DIN rail mounting
Wall mounting (with optional kit)

Environmental conditions
– Operating temperature 0 to 60°C (32 to 140°F)
– Storage temperature (including packaging)- 40 to 85°C (-40 to 140°F)40 to 85°C (-40 to 185°F)
– Relative humidity 5 to 95% (non-condensing)

Standards and certifications
– Safety
UL 508
EN 62368-1
– EMC EN 55032/24
– EMI CISPR 32, FCC Part 15B Class A
– EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 3 kV; Signal: 3 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
– Free fall IEC 60068-2-31
– Shock IEC 60068-2-27
– Vibration IEC 60068-2-6

MTBF
– Time 2.407,739 h
– Standards Telcordia (Bellcore), GB