Connecting industrial serial devices in a system can be done quickly, easily and reliably with our fieldbus gateway solutions. Thanks to their intelligent functionality, you can connect your Modbus and PROFIBUS devices effortlessly.

Serial interface
– Console port: RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
– Number of ports: 1
– Connection: DB9 connector
– Serial standards: RS-232/422/485
– Baud rate: 50 bps to 921.6 kbps
– Data bits: 7, 8
– Parity: None, Even, Odd, Space, Mark
– Stop bits: 1, 2
– Flow control: DTR/DSR, RTS/CTS
– RS-485 data direction control: Automatic Data Direction Control (ADDC)
– Pull high/low resistor for RS-485: 1 kilo-ohm, 150 kilo-ohm
– Terminating resistor for RS-485: 120 ohms
– Insulation: 2 kV (I models)

Serial signals
– RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
– RS-422: Tx+, Tx-, Rx+, Rx-, GND
– RS-485-2w: Data+, Data-, GND
– RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND

Serial software functions
– Configuration options: MGate Manager
– Industrial protocols: Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, PROFIBUS DP-V0 Slave

Modbus RTU/ASCII
– Mode: Master, Slave
– Supported functions: 1, 2, 3, 4, 5, 6, 15, 16, 23
– Max. Number of commands: 100
– Input data size: 7744 bytes
– Output data size: 7744 bytes

PROFIBUS interface
– Industrial protocols: PROFIBUS DP
– Number of ports: 1
– Connector: DB9 socket
– Baud rate: 9600 bps to 12 Mbps
– Isolation: 2 kV (built-in)
– Signals: PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V

PROFIBUS
– Rotary switch: PROFIBUS addresses 0-99 (addresses 100-125 are supported by software configuration)
– Mode: DP-V0 Slave
– Max. Max. number of master connections: 1
– Max. number of PROFIBUS I/O modules Max. number of PROFIBUS I/O modules: 24 per page
– Max. Max. number of PROFIBUS pages: 32
– Input data size: 7744 bytes
– Output data size: 7744 bytes

Power parameters
– Input voltage: 12 to 48 VDC
– Input current: 275 mA @ 12 VDC
– Power connection: Screwable Euroblock terminal

Relay
– Current carrying capacity of contacts: Resistive load: 1 A @ 24 VDC

Physical properties
– Housing: Metal
– Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
– Weight: 500 g (1.10 lb)
– IP rating: IP30 (Note: It is recommended to fix the M3x3mm Nylok screws on the rear panel)

Environmental conditions
– Operating temperature: -40 to 75°C (-40 to 167°F)
– Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
– Ambient relative humidity: 5 to 95% (non-condensing)

Standards and certifications
– EMC: EN 55032/35
– EMI: CISPR 32, FCC Part 15B Class A
– EMS:
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; signal: 10 V/m
IEC 61000-4-8 PFMF
– Safety:
IEC 60950-1
UL 60950-1
IEC 62368-1
UL 62368-1
– Hazardous areas: ATEX, Class I Division 2, IECEx
– Free fall: IEC 60068-2-32
– Shock: IEC 60068-2-27
– Vibration: IEC 60068-2-6, IEC 60068-2-64

MTBF
– Time: MGate 4101-MB-PBS models: 1,537,948 hrs, MGate 4101I-MB-PBS models: 1,315,666 hrs
– Standards: Telcordia SR332