Introduction
Moxa’s MiiNePort E1 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E1 is powered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, serial baud rates up to 921.6 kbps, a versatile selection of ready-to-use operating modes and low power requirements. Utilising Moxa’s innovative NetEZ technology, the MiiNePort E1 can instantly convert any device with a standard serial port into an Ethernet-enabled device. In addition, the MiiNePort E1 is the size of an RJ45 connector, so it can be easily installed into virtually any existing serial device.

Moxa’s second generation SoC
The MiiNe is designed to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E1, which utilises the MiiNe as its SoC, is one of the smallest embedded device servers in the world and has the lowest power consumption of any comparable product. The MiiNe has the following features:

– Designed for 1 or 2 port serial-to-Ethernet applications
– Utilises a 32-bit Arm 7 core
– Uses Moxa’s own advanced UART technology
– 2 MB Flash and 4 MB SDRAM memory built-in

NetEZ technology
Moxa’s NetEZ technology makes the MiiNePort E1 one of the most user-friendly embedded device servers as it promises easy operation with minimal integration effort. Moxa’s NetEZ technology provides serial device manufacturers with a powerful set of tools for integrating Ethernet functionality into serial devices. These tools include EXTrigger, MCSC (Multi-Channel Serial Communications), Serial Communication Mode (SCM) and AutoCFG. With EXTrigger, the device can be reset and restarted in no time by simply pressing the EXTrigger button, making troubleshooting much easier. There is no need to open the housing of the device or interrupt operation. MCSC offers two ports and two channels for multitasking applications, allowing the device to function as a server and client at the same time. The MiiNePort’s user-friendly SCM allows the user to configure the network via serial communication within the serial device. This feature provides another option for on-site troubleshooting without an internet connection. AutoCFG enables auto-configuration with mass configuration software to place default settings on multiple modules simultaneously. This technology not only speeds up time-to-market, but also prevents manual errors.

Embedded System
– CPU: 32-bit Arm Core

Memory
– Flash: 2 MB
– SDRAM: 4 MB

Input/Output Interface
– Configurable DIO channels (via software): 1
– Digital input channels: 1
– Digital output channels: 1

Ethernet interface
– 10/100BaseT(X) ports, Auto MDI/MDI-X: 8-pin RJ45
– Magnetic isolation protection: 1.5 kV (built-in)

Ethernet software functions
– Configuration options: Web Console (HTTP), Windows Utility, Telnet Console, Serial Console
– Management: ARP, BOOTP, Device Search Utility (DSU), DHCP Client, HTTP, IPv4, SMTP, SNMPv1, TCP/IP, Telnet, TFTP, ICMP
– Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
– Linux Real TTY Drivers: Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x and 5.x
– Fixed TTY drivers: SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
– Android API: Android 3.1.x and higher

Serial interface
– Number of ports: 1
– Serial standards: TTL
– Operating modes: MiiNePort E1 series: Real COM mode, RFC2217 mode, TCP client mode, TCP server mode, UDP mode, MiiNePort E1-SDK: Real COM mode, Ethernet Modem mode, Real COM mode, TCP Client, TCP Server, UDP mode, RFC2217
– Baud rate: MiiNePort E1 series: 50 bps to 230.4 kbps, MiiNePort E1-H/-SDK series: 50 bps to 921.6 kbps
– Data bits: 5, 6, 7, 8
– Stop bits: 1, 1.5, 2
– Parity: None, Even, Odd, Space, Mark
– Flow control: None, RTS/CTS, XON/XOFF

Serial signals
– TTL: TxD, RxD, RTS, CTS, RST (reset circuit), GND

NetEZ technology
– NetEZ functions: ExTrigger, SCM (Serial Command Mode), AutoCFG, MCSC (Multi-Channel Serial Communication)

Serial software functions
Serial to Ethernet Example source code:
– MiiNePort E1-SDK (integrated in MiiNePort-IDE):
– 1. TCP Server Echo
– 2. TCP Server to Serial (single connection)
– 3. TCP Server to Serial (multi connection)
– 4. TCP Client Echo
– 5. TCP Client to Serial (Startup)
– 6. TCP Client to Serial (Any character)
– 7. TCP Client to Serial (Designed destination TCP/IP port from serial)
– 8. UDP Echo
– 9. UDP to Serial

Performance parameters
– Input current: MiiNePort E1 series: 160 mA at max. 3.3 VDC, MiiNePort E1-H/-SDK series: 195 mA @ 3.3 VDC max.
– Input voltage: 3.3 VDC max. Input voltage: 3.3 VDC

Physical properties
– Dimensions: MiiNePort E1-ST/-SDK series: 140 x 100 mm (5.51 x 3.94 in.)
140 x 100 mm (5.51 x 3.94 in.), MiiNePort E1/E1-H/E1-SDK series: 33.9 x 16.25 x 13.5 mm (1.33 x 0.64 x 0.53 in.)
– Weight: MiiNePort E1/E1-H/E1-SDK series: 9 g (0.02 lb)
– Form factor type: Drop-in modules

Environmental limits
– Operating temperature: Standard models: 0 to 55˚C (32 to 131˚F), Wide-Temp.Models: -40 to 85˚C (-40 to 185˚F), 0 to 55°C (32 to 131°F)
– Storage temperature (including packaging): -40 to 60°C (-40 to 140°F)
– Ambient relative humidity: 5 to 95% (non-condensing)

Standards and certifications
– EMC: EN 55032/35
– EMI: CISPR 32, FCC Part 15B Class B

EMS:
– IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
– IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
– IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
– IEC 61000-4-5 Surge: Power: 2 kV; Signal: 0.5 kV
– IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
– IEC 61000-4-8 PFMF
– IEC 61000-4-11

– Environmental testing: IEC 60068-2-1, IEC 60068-2-3
– Shock: IEC 60068-2-27
– Vibration: IEC 60068-2-6

Declaration
– Environmentally friendly product: RoHS, CRoHS, WEEE

MTBF
– Time: 5,515,294 hours
– Standards: Telcordia SR332