The NPort® 5200A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5200A device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial-to-Ethernet solutions possible.

A Greener Serial-to-Ethernet Solution
The MiiNe is a small but powerful Arm-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort® 5200A Series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

Surge Protection for Serial, Ethernet, and Power
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort® 5200A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-Step Web-Based Configuration
The NPort® 5200A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort® 5200A’s web console guides users through three simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this fast 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.

COM Port Grouping
The NPort® 5200A’s COM Grouping function allows you to create a COM Group and redirect data from it to several physical COM ports on NPort device servers. With COM Grouping, you will be able to control multiple physical serial ports simultaneously by operating only one COM port.

Features and Benefits
– Fast 3-step web-based configuration
– Surge protection for serial, Ethernet, and power
– COM port grouping and UDP multicast applications
– Screw-type power connectors for secure installation
– Dual DC power inputs with power jack and terminal block
– Versatile TCP and UDP operation modes

Specifications
Ethernet Interface
– 10/100BaseT(X) Ports (RJ45 connector): 1
– Magnetic Isolation Protection: 1.5 kV (built-in)

Ethernet Software Features
– Configuration: Options Windows Utility, Serial Console, Telnet Console, Web Console (HTTP/HTTPS)
– Management: ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, SMTP, SNMPv1/v2c, Telnet, TCP/IP, UDP
– Filter: IGMP v1/v2
– Windows Real COM Drivers:
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP
Embedded
– Fixed TTY Drivers: SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
– Linux Real TTY Drivers: Kernel version: 2.4.x, 2.6.x, 3.x, 4.x
– Android API: Android 3.1.x and later
– MIB: RFC1213, RFC1317

Serial Interface
– Connector: NPort 5210A/5250A Series: DB9 male
– No. of Ports. 2
– Serial Standards: NPort 5250A Series: RS-232, RS-422, RS-485
– Operation Modes: Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP
– Baudrate: Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
– Data Bits: 5, 6, 7, 8
– Stop Bits: 1, 1.5, 2
– Parity: None, Even, Odd, Space, Mark
– Flow Control: RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
– Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
– RS-485 Data Direction Control: ADDC® (automatic data direction control)
– Terminator for RS-485: 120 ohms

Serial Signals
– RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
– RS-422: Tx+, Tx-, Rx+, Rx-, GND
– RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
– RS-485-2w: Data+, Data-, GND

Power Parameters
– Input Current: 119 mA @ 12 VDC
– Input Voltage: 12 to 48 VDC
– No. of Power Inputs: 2
– Power Connector:
1 removable 3-contact terminal block(s)
Power input jack

Reliability
– Automatic Reboot Trigger: Built-in WDT

Physical Characteristics
– Housing: Metal
– Dimensions (with ears): 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)
– Dimensions (without ears): 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
– Weight: 340 g (0.75 lb)
– Installation: Desktop, DIN-rail mounting (with optional kit), Wall mounting

Environmental Limits
– Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
– Storage Temperature (package included): -40 to 75°C (-40 to 167°F)
– Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications
– EMC: EN 55032/24
– EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
– EMI: CISPR 32, FCC Part 15B Class A
– Safety: UL 60950-1

Declaration
– Green Product: RoHS, CRoHS, WEEE

MTBF
– Time: 847,750 hrs
– Standards: Telcordia (Bellcore) Standard TR/SR