MOXA – NPORT 5610-16-48V – 16-port RS-232 rackmount device server with RJ45 connectors and 48 VDC power inp

With the NPort® 5600 Rackmount Series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.

Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.

19-Inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for a standard 19-inch rackmount, allowing you to simplify operational, maintenance, and administrative tasks.

Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.

LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.

Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Specifications
Ethernet Interface
– 10/100BaseT(X) Ports (RJ45 connector): 1
– Magnetic Isolation Protection: 1.5 kV (built-in)

Ethernet Software Features
– Configuration: Options Telnet Console, Web Console (HTTP/HTTPS), Windows Utility
– Management: ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, RFC2217, Rtelnet, PPP, SLIP, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP
– Filter: IGMP v1/v2c
– Windows Real COM Drivers:
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64),
Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP
Embedded
– Fixed TTY Drivers: SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
– Linux Real TTY Drivers Kernel version: 2.4.x, 2.6.x, 3.x, 4.x
– Android API: Android 3.1.x and later
– Time Management: SNTP

Serial Interface
– Connector: 8-pin RJ45
– No. of Ports: 8 or 16 ports
– Serial Standards:
NPort 5610 Series: RS-232
NPort 5630 Series: RS-422, RS-485
NPort 5650 Series: RS-232, RS-422, RS-485
– Operation Modes: Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP
– Baudrate: Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
– Data Bits: 5, 6, 7, 8
– Stop Bits: 1, 1.5, 2
– Parity: None, Even, Odd, Space, Mark
– Flow Control: None, RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
– Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
– Terminator for RS-485: 120 ohms
– RS-485 Data Direction Control: ADDC® (automatic data direction control)

Serial Signals
– RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
– RS-422: Tx+, Tx-, Rx+, Rx-, GND
– RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
– RS-485-2w: Data+, Data-, GND

Power Parameters
– Input Current:
NPort 5610-8-48V/16-48V: 135 mA @ 48 VDC
NPort 5650-8-HV-T/16-HV-T: 152 mA @ 88 VDC
NPort 5610-8/16: 141 mA @ 100 VAC
– Input Voltage:
HV Models: 88 to 300 VDC
AC Models: 100 to 240 VAC, 47 to 63 Hz
DC Models: ±48 VDC, 20 to 72 VDC, -20 to -72 VDC

Reliability
– Automatic Reboot Trigger: Built-in WDT

Physical Characteristics
– Housing: Metal
– Installation: 19-inch rack mounting
– Dimensions (with ears): 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
– Dimensions (without ears): 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
– Weight:
NPort 5610-16/5630-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
– Interactive Interface:
LCD panel display (standard temp. models only)
Push buttons for configuration (standard temp. models only)

Environmental Limits
– Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
– Storage Temperature (package included):
Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 185°F)
High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
– Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications
– EMI: CISPR 32, FCC Part 15B Class A
– EMC: EN 55032/24
– EMS: NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8
IEC 61000-4-11 DIPs
– Medical: EN 60601-1-2 Class B, EN 55011
– Safety: UL 60950-1

MTBF
– Time: NPort 5610-16-48V: 662,111 hrs
– Standards:
AC models: MIL-HDBK-217F
HV models: Telcordia (Bellcore) Standard TR/SR