Power supply module for the EDS-4000/G4000 series with 12/24/48 VDC redundant dual inputs, 9.6 to 60 VDC operating voltage

Power supply parameters
Note
The name of the device model and the power supply parameters of the EDS-4000/G4000 series are determined by the installed PWR-100 power supply module.
– PWR-100-LV: -LV/-LV-T models PWR-100-LV: -LV/-LV-T models
– PWR-105-HV-I: -HV/-HV-T models
– PWR-101-LV-BP-I: -LVA/-LVA-T models (PoE support)
– PWR-103-LV-VB-I: -LVB/-LVB-T models (PoE support)
Example:
– EDS-G4008-T + PWR-100-LV = EDS-G4008-LV-T
– EDS-G4008-T + PWR-105-HV-I = EDS-G4008-HVT
If you install a different power supply module, observe the specifications of the corresponding model. For example, if you replace the power module of the EDS-G4008-LV-T with the PWR-105-HV-I, observe the specifications of the EDS-G4008-HV-T.
Power over Ethernet:
Only the EDS-4008-4P-2GT-2GS(-T), EDS-4012-8P-4GS(-T) and EDS-G4012-8P-4QGS(-T) models support PoE. If a PoE-capable module of the PWR-100 series (PWR-101-LV-BP-I, PWR-103-LV-VB-I) is installed in a non-PoE-capable model of the EDS-4000/G4000 series, the PoE functionality is not available.

Connection
– 2 removable 4-contact terminal block(s)
Input voltage
– 12/24/48 VDC
Operating voltage
– 9.6 to 60 VDC
Input current
– 12 to 48 VDC, 1.50 to 0.40 A or 24 VDC, 0.70 A
Number of current inputs
– Redundant dual inputs
Inrush current (max.)
– Max. 0.8 A @ 48 VDC (0.1 to 1 ms)
Overload current protection
– Supports
Reverse polarity protection
– Supports

Physical properties
Dimensions
– 103 x 98 x 26.6 mm (4.06 x 3.86 x 1.02 in)
Weight
– 142 g (31 lb)

Environmental conditions
Operating temperature
– The operating temperature depends on the EDS-4000/G4000 switch in which the module is installed. For further information, please refer to the relevant data sheet for the EDS-4000/G4000 series.
Storage temperature
– -40 to 85°C (-40 to 185°F)
Ambient relative humidity
– 5 to 95% (non-condensing)

Standards and certifications
Safety
– EN 62368-1 (LVD)
EMI
– FCC Part 15 Subpart B Class A
EMC
– EN 55032/35
– EN 61000-6-2/-6-4
EMS
– EN 61000-4-2 (ESD) Level 4
– EN 61000-4-3 (RS) Level 3
– EN 61000-4-4 (EFT) Level 4
– EN 61000-4-5 (Surge) Level 4
– EN 61000-4-6 (CS) Level 3
– EN 61000-4-8 Level 4
Vibration
– ISTA 1A