Moxa’s Small Form-Factor Pluggable Transceiver (SFP) Ethernet fibre optic modules for Gigabit Ethernet provide coverage over a wide range of communication distances.

WDM type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature

Ethernet interface
– Ports: 1
– Connectors:
Duplex LC connector
Simplex LC connector (WDM type only)
– Fibre optic
– Fibre optic
– Fibre optic
– Fibre optic
– Fibre optic
– Fibre optic:
Typical distance: To achieve the typical distance of the specified fibre optic transceiver, please observe the formula: Link budget(dB) > Dispersion loss(dB) + Total link loss(dB)

Performance parameters
– Power consumption: Max. 1 W

Environmental limits
– Operating temperature: 0 to 60°C (32 to 140°F)
– Storage temperature (including enclosure): -40 to 85°C (-40 to 185°F)
– Relative humidity: 5 to 95% (non-condensing)

Standards and certifications
– Safety:
UL 62368-1
IEC 62368-1
IEC 60825-1
– EMC: EN 55032/35
– EMI:
FCC 15B Test Report
ICES-003: 2020 Edition 7
– EMS:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV(AC), 0.5 kV(DC); Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 1 kV / 2 kV(AC), 0.5 kV(DC); Signal: 1 kV
IEC 61000-4-6 CS: 0.15 MHz to 10 MHz: 3 V, 10 MHz to 30 MHz: 3 to 1 V, 30 MHz to 80 MHz: 1 V
IEC 61000-4-8 PFMF: 1 A/m at 50 Hz
IEC61000-4-11 Voltage dips and interruptions
– Marine: DNV