Arm-based wireless-enabled DIN-rail industrial computer with wide operating temperature, 2 serial ports, 2 LAN ports, CAT.1 LTE module for APAC built-in, and MOXA Industrial Linux pre-installed

Moxa’s UC-3100 Series computers can be used as edge-field smart gateways for data pre-processing and transmission, as well as for other embedded data-acquisition applications. The UC-3100 Series includes three models, each supporting different wireless options and protocols. The UC-3100’s advanced heat dissipation design makes it suitable for use in temperatures ranging from -30 to 70°C. In fact, the Wi-Fi and LTE connections can be used simultaneously in both cold and hot environments, allowing you to maximize your “data pre-processing” and “data transmission” capability in most harsh environments. In addition, TPM v2.0 uses a hardware chip to boost data security, making it highly unlikely
that hackers will be able to steal your data, either remotely or locally.

The UC-3100 is more than just a hardware solution. In order to offer a better user experience with a Moxa Arm-based computer, the UC-3100 supports the following software features, allowing you to use the most suitable configuration for your application.

– High VPN performance; greater than 70 Mbps Ethernet throughput with AES-256 encryption
– Robust file system to prevent the system from being bricked due to a firmware upgrade failure
– Cybersecurity auto-configuration system based on IEC 62443
– Real COM mode to provide a control interface to Moxa’s NPort products

In addition, Moxa provides 10 years of Linux OS support from Moxa’s customer support engineers. With a new version of the Debian repository
released on average every 2 to 3 years, long-term Linux OS support helps you create a reliable solution that will be supported now and long into the future.

Applications
– Remote Terminal Unit (RTU)
– Data acquisition
– M2M communication (smart gateway)
– Digital signage
– Factory automation
– In-vehicle monitor/data logger (transportation)
– Programmable router
– Energy usage optimization
– Predictive maintenance
– Asset management

Features and Benefits
– Armv7 Cortex-A8 1000 MHz processor
– Integrated Wi-Fi 802.11a/b/g/n and LTE Cat.1 for the US, EU, and AUS regions
– Supports TPM v2.0 (optional)
– Industrial CAN 2.0 A/B protocols supported
– Robust root file system to prevent the system from being bricked due to a firmware update failure
– -30 to 70°C system operating temperature
– Meets the EN 61000-6-2 and EN 61000-6-4 standards for industrial EMC applications
– Supports Linux real-time OS mode
– Moxa Industrial Linux with 10-year long-term support

Specifications
Computer
– CPU: Armv7 Cortex-A7 dual-core 1 GHz
– DRAM: 512 MB DDR3
– Supported: OS Linux Debian 9 kernel 4.4 (Moxa Industrial Linux)
– Storage Pre-installed: 4 GB eMMC
– Storage Slot: SD slots x 1

Computer Interface
– Ethernet Ports: Auto-sensing 10/100 Mbps ports (RJ45 connector) x 2
– Serial Ports: UC-3111 Series: RS-232/422/485 ports x 2, software-selectable (DB9)
– USB 2.0: USB 2.0 hosts x 1, type-A connectors
– Cellular Antenna Connector: SMA x 2
– Wi-Fi Antenna Connector: UC-3111/3121 Series: RP-SMA x 2
– SIM Format: Nano
– Number of SIMs: 2
– Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)

Ethernet Interface
– Magnetic Isolation Protection: 1.5 kV (built-in)

Serial Interface
– Data Bits: 5, 6, 7, 8
– Parity: None, Even, Odd, Space, Mark
– Stop Bits: 1, 1.5, 2

Serial Signals
– RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
– RS-422: Tx+, Tx-, Rx+, Rx-, GND
– RS-485-2w: Data+, Data-, GND
– RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND

Cellular Interface
– Band Options: AU/NZ Model: LTE Bands 3, 5, 8, 28 (1800, 850, 900, 700 MHz) UMTS Bands 1, 5, 8 (WCDMA/FDD 2100, 850, 900 MHz)

WLAN Interface
– WLAN Standards: 802.11a/b/g/n

CAN Interface
– Baudrate: 10 kbps to 1000 kbps
– Connector: DB9 male
– Isolation: 2 kV (built-in)
– Signals: CAN_H, CAN_L, CAN_GND, CAN_SHLD, CAN_V+, GND

LED Indicators
– System: Power x 1
– Wireless Signal Strength: UC-3111-T-AU-LX: Cellular/Wi-Fi x 8
– CAN: UC-3121-T-AU-LX: 1 per port (Tx, Rx), UC-3121-T-EU-LX: 1 per port (Tx, Rx), UC-3121-T-US-LX: 1 per port (Tx, Rx)
– Serial: UC-3111-T-AU-LX: 2 per port (Tx, Rx)
– LAN: 2 per port (10/100 Mbps)

Power Parameters
– Power Consumption: 6 W (max.)
– Input Current: 500 mA @ 12 VDC
– Input Voltage: 9 to 36 VDC

Physical Characteristics
– Dimensions: UC-3111-T-AU-LX: 128.5 x 89.1 x 41 mm (5.06 x 3.51 x 1.61 in)
– Housing: Metal
– Installation: DIN-rail mounting, Wall mounting (with optional kit)
– Dimensions (without ears): UC-3111/3121 Series: 128.5 x 89.1 x 41 mm (5.06 x 3.51 x 1.61 in)
– Weight: Product only: 550 g (1.22 lb)

Environmental Limits
– Operating Temperature -30 to 70°C (-22 to 158°F)
– Storage Temperature (package included) -40 to 85°C (-40 to 185°F)

Standards and Certifications
– EMC: EN 61000-6-2/-6-4
– EMI: CISPR 22, FCC Part 15B Class A
– EMS:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
– Cellular Standards:
EN 301511
EN 3011908-1
MPE SAR
EN 301489-1-1
EN 301489-24
AS/NZS S042
AS/NZS 60950
– Radio Frequency: PTCRB, FCC
– Hazardous Locations: Class I Division 2, IECEx, Class I Division 2, ATEX
– Safety: UL 60950-1
– WLAN Standards:
EN 301489-1-17
EN 300328
EN 301893

Package Contents
– Cable: 1 x terminal block to power jack converter
– Documentation: 1 x quick installation guide

Declaration
– Green: Product RoHS, CRoHS, WEEE