Moxa’s industrial video servers are designed to perform reliably even in harsh environments, making them ideal to serve as the core of a remote monitoring or surveillance solution. Our video servers are capable of using efficient MPEG-4 video compression and allow for easy integration of CCTV cameras into your IP surveillance solution.

Full Motion, 1-ch industrial video encoder, 2 10/100BaseT(X) Ethernet ports, -40 to 75°C operating temperature

Memory
– SD Slot SDXC

Input/Output Interface
– Digital Input Channels 2
– Digital Inputs
+13 to +30 V for state 1
-30 to +1 V for state 0
Max. input current: 8 mA
– Relay Channels 2
– Contact Current Rating Resistive load: 1 A @ 24 VDC
– Connector Terminal block

Ethernet Interface
– 10/100BaseT(X) Ports (RJ45 connector) 2

Ethernet Software Features
– Protocols
TCP/IP
IPv4/IPv6
UDP
HTTP
RTP/RTSP
ARP
UPnP
FTP
TFTP
NTP Client
DNS
QoS
IGMP v3
ICMP
SNMPv1/v2c/v3
Modbus TCP
HTTPS
802.1X
NTCIP

Security Functions
– Password User-level password protection
– Filter IP address
– Authentication 802.1X
– Encryption
HTTPS
SSH

LED Interface
– LED Indicators
STAT: Indicates if system is booted up properly or not
Power 1: Power 1 on/off
Power 2: Power 2 on/off
FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
Video: Video input signal
PTZ: Indicates if PTZ or COM port data has been transmitted
SD: Indicates if SD card was mounted successfully
Network: 10 Mbps or 100 Mbps

Serial Interface
– PTZ Port 1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
– COM Port 1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps
– Console Port 1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)

Power Parameters
No. of Power Inputs
2
Input Voltage
Redundant dual inputs
Operating Voltage
12 to 32 VDC, 18 to 30 VAC
Input Current
0.64 A @ 12 VDC, 0.18 A @ 32 VDC
0.59 A @ 18 VAC
0.35 A @ 30 VAC
Power Connector
2-pin terminal block

Video Interface
– Video Compression H.264 (ISO/IEC 14496-10) or MJPEG
– Video Input 1, BNC connector (1.0 Vpp, 75 ohm)
– Video Output via Ethernet
– Video Streams 4 independent H.264 or MJPEG video streams
– NTSC/PAL Auto-sensing or manual
– Video Viewing
DynaStream™ support for changing the video frame rate automatically
CBR Pro™ for good image quality in limited bandwidth transmissions
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Image tuning: control brightness, contrast, saturation
Maximum of 10 simultaneous unicast connections, 50 multicast clients

Audio Interface
– Audio Inputs 1 Line-in or MIC-in with 3.5 mm phone jack
– Audio Outputs 1 Line-out, with 3.5 mm phone jack
– Audio Format Mono, PCM (G.711)

Camera Software Development
– Video Standards ONVIF Profile S

Camera PAN/TILT/ZOOM
– PTZ Camera Control Via PTZ port or COM port
– PTZ Control Functions Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)
– PTZ Function Updates Driver upload supported
– Protocols Pelco D, Pelco P, Custom Camera

Camera Alarm Software Features
– Intelligent Video Camera tampering detection
– Video Motion Detection 3 independently configurable areas
– Scheduling Daily repeat timing schedule
– Imaging JPEG snapshots for pre/trigger/post alarm images
– Custom Alarms HTTP event servers for setting customized alarm actions
– FTP Messaging Automatic transfer of stored images via FTP as event-triggered actions
– Pre-Alarm Buffer 50 MB video buffer for JPEG snapshot images
– Video Recording Event recordings stored on the SD card

Software Requirements
– Memory Size 1 GB
– Operating System Windows 7 or above
– Browser Internet Explorer 9.x or above
– Multimedia DirectX 9.0C or above

Physical Characteristics
– Housing Metal
– Dimensions 46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
– Weight 710 g (1.57 lb)
– Installation
– DIN-rail mounting
– Wall mounting (with optional kit)

Environmental Limits
– Operating Temperature -40 to 75°C (-40 to 167°F)
– Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
– Ambient Relative Humidity 5 to 95% (non-condensing)
– Altitude 2000 m

Standards and Certifications
– EMI CISPR 32, FCC Part 15B Class A
– EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
– Freefall IEC 60068-2-31
– Safety UL 60950-1
– Shock IEC 60068-2-27
– Vibration IEC 60068-2-6

MTBF
– Time 862,568 hrs
– Standards Telcordia SR332