Our selection of IP cameras includes dome, box, and cameras that have rugged designs. They comply with parts of the EN 50155 standard, enabling them to perform reliably and deliver superior image quality suitable for a range of applications.

EN 50155, 1080P, H.264/MJPEG IP camera with M12 connector, 1 audio input, PoE, 6.0 mm lens, -25 to 55°C operating temperature

Memory
microSD Slot
– SDXC

Input/Output Interface
Digital Input Channels
– 1
Digital Inputs
– +13 to +30 V for state 1
– -30 to +1 V for state 0
– Max. input current: 8 mA
Connector
– 5-pin A-coded male M12 connector with 20 cm cable

Ethernet Interface
PoE Ports (10/100BaseT(X), M12 D-coded 4-pin female connector)
– 1

Ethernet Software Features
Protocols
– TCP/IP
– IPv4/IPv6
– UDP
– HTTP
– RTP/RTSP
– ARP
– UPnP
– FTP
– TFTP
– NTP Client
– DNS
– QoS
– IGMP v3
– ICMP
– SNMPv1/v2c/v3
– DHCP Opt66/67
– HTTPS
– SIP

Security Functions
Password
– User-level password protection
Filter
– IP address
Encryption
– HTTPS
– SSH

Power Parameters
No. of Power Inputs
– 1
Source of Input Power
– PoE (IEEE 802.3af)
Input Current
– 0.17 A @ 48 VDC

Camera Characteristics
Sensor
– 1/3-in 1080P progressive scan CMOS
Lens
– f=6.0 mm, F1.8, Diagonal 62°, Horizontal 43°, Vertical 24°
Minimum Illumination
– Color: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec)
Synchronization
– Internal
White Balance
– ATW/AWB
Electronic Shutter
– Auto, Fixed (1/30 to 1/25000 sec)
S/N Ratio
– Maximum 50 dB (AGC off; DNR on)
DNR (digital noise reduction)
– Built-in 2D/3D DNR
WDR (wide dynamic range)
– 100 dB
AGC (auto gain control)
– 2X, 4X, 8X, 16X
Flickerless Control
– Automatic, 50 Hz, 60 Hz modes
Image Rotation
– Flip, Mirror, 90°, 180°, 270° rotation
Image Setting
– Manual tuning with saturation, sharpness, and contrast
Camera Angle
– Pan: ±15°, Tilt: 0° to 90° (controlled manually)

Video Interface
Video Compression
– H.264 (ISO/IEC 14496-10) or MJPEG
Video Output
– via Ethernet
Video Streams
– 4 independent H.264 or MJPEG video streams
Video Resolution and FPS (frames per second)
Video Viewing
– DynaStream™ support for changing the video frame rate automatically
– CBR Pro™ for good image quality in limited bandwidth transmissions
– 3 privacy mask areas provided
– Adjustable image size and quality
– Timestamp and text overlay
– OSD (On Screen Display) position adjustable
– Maximum of 10 simultaneous unicast connections, 50 multicast clients

Audio Interface
Audio Format
– Mono, PCM (G.711)
– AAC
Audio Inputs
– 1 x line-in, with M12connector

Camera Software Development
Video Standards
– ONVIF Profile S

Camera Alarm Software Features
Intelligent Video
– Camera tampering detection
Video Motion Detection
– 3 independently configurable areas
Scheduling
– Daily repeat timing schedule
Imaging
– JPEG snapshots for pre/trigger/post alarm images
Custom Alarms
– HTTP event servers for setting customized alarm actions
FTP Messaging
– Automatic transfer of stored images via FTP as event-triggered actions
Pre-Alarm Buffer
– 50 MB video buffer for JPEG snapshot images
Video Recording
– Event recordings stored on the SD card

Software Requirements
Memory Size
– 2 GB
Operating System
– Windows 7 or above
Browser
– Internet Explorer 9.x or above
Multimedia
– DirectX 9.0C or above

Physical Characteristics
Housing
– IP66 rain and dust protection
– Metal housing, PC dome cover
– IK8 vandal resistant protection
Dimensions
– 110 x 115.5 x 61.8 mm (4.33 x 4.53 x 2.43 in)
Weight
– 620 g (1.37 lb)
Installation
– Panel mounting
Protection
– PCB conformal coating is optional and provided on request. If conformal coating is required, please contact Moxa.

Environmental Limits
Operating Temperature
– -25 to 55°C (-13 to 131°F)
Storage Temperature (package included)
– -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
– 5 to 95% (non-condensing)
Ingress Protection
– IEC 60529, IP66
Vandal Resistance
– EN 62262, IK8
Altitude
– 2000 m
– Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

Standards and Certifications
EMI
– CISPR 32, FCC Part 15B Class A
EMS
– IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
– IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
– IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
– IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
– IEC 61000-4-6 CS: 10 V
– IEC 61000-4-8 PFMF
Freefall
– IEC 60068-2-31
Railway Fire Protection
– EN 45545-2
Safety
– UL 62368-1
Shock
– IEC 60068-2-27, IEC 61373, EN 50155
Vibration
– IEC 60068-2-64, IEC 61373, EN 50155
Railway
– EN 50155 (complies with a portion of EN 50155 specifications)

MTBF
Time
– 1,075,216 hrs
Standards
– Telcordia SR332