Our range of IP cameras includes dome and box cameras as well as cameras with a robust design. They fulfil parts of the EN 50155 standard and therefore offer reliable performance and excellent image quality suitable for a range of applications.

EN 50155, 1080P, H.264/MJPEG IP camera with M12 connector, 1 audio input, PoE, 8.0 mm lens, -40 to 70°C operating temperature

Memory
– microSD Slot SDXC

Input/Output Interface
– Digital Input Channels 1
– Digital Inputs
+13 to +30 V for state 1
-30 to +1 V for state 0
Max. input current: 8 mA
– Connector 5-pin A-coded male M12 connector with 20 cm cable

Ethernet Interface
– PoE Ports (10/100BaseT(X), M12 D-coded 4-pin female connector) 1

Ethernet Software Features
– Protocols
TCP/IP
IPv4/IPv6
UDP
HTTP
RTP/RTSP
ARP
UPnP
FTP
TFTP
NTP Client
DNS
QoS
IGMP v3
ICMP
SNMPv1/v2c/v3
DHCP Opt66/67
HTTPS
SIP

Security Functions
– Password User-level password protection
– Filter IP address
– Encryption
HTTPS
SSH

Power Parameters
– No. of Power Inputs 1
– Source of Input Power PoE (IEEE 802.3af)
– Input Current 0.17 A @ 48 VDC

Camera Characteristics
– Sensor 1/3-in 1080P progressive scan CMOS
– Lens f=8.0 mm, F1.6, Diagonal 42°, Horizontal 33°, Vertical 17°
– Minimum Illumination Colour: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec)
– Synchronisation Internal
– White Balance ATW/AWB
– Electronic Shutter Auto, Fixed (1/30 to 1/25000 sec)
– S/N Ratio Maximum 50 dB (AGC off; DNR on)
– DNR (digital noise reduction) Built-in 2D/3D DNR
– WDR (wide dynamic range) 100 dB
– AGC (auto gain control) 2X, 4X, 8X, 16X
– Flickerless Control Automatic, 50 Hz, 60 Hz modes
– Image Rotation Flip, Mirror, 90°, 180°, 270° rotation
– Image Setting Manual tuning with saturation, sharpness, and contrast
– Camera Angle Pan: ±15°, Tilt: 0° to 90° (controlled manually)

Video Interface
– Video Compression H.264 (ISO/IEC 14496-10) or MJPEG
– Video Output via Ethernet
– Video Streams 4 independent H.264 or MJPEG video streams
– Video Resolution and FPS (frames per second) Read more
– Video Viewing
DynaStream™ support for changing the video frame rate automatically
CBR Pro™ for good image quality in limited bandwidth transmissions
3 privacy mask areas provided
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Maximum of 10 simultaneous unicast connections, 50 multicast clients

Audio interface
– Audio format
Mono, PCM (G.711)
AAC
– Audio Inputs 1 x line-in, with M12connector

Camera Software Development
– Video Standards ONVIF Profile S

Camera Alarm Software Features
– Intelligent Video Camera tampering detection
– Video Motion Detection 3 independently configurable areas
– Scheduling Daily repeat timing schedule
– Imaging JPEG snapshots for pre/trigger/post alarm images
– Custom Alarms HTTP event servers for setting customised alarm actions
– FTP Messaging Automatic transfer of stored images via FTP as event-triggered actions
– Pre-Alarm Buffer 50 MB video buffer for JPEG snapshot images
– Video Recording Event recordings stored on the SD card

Software Requirements
– Memory Size 2 GB
– Operating System Windows 7 or above
– Browser Internet Explorer 9.x or above
– Multimedia DirectX 9.0C or above

Physical Characteristics
– Housing
IP66 rain and dust protection
Metal housing, PC dome cover
IK8 vandal resistant protection
– Dimensions 110 x 115.5 x 61.8 mm (4.33 x 4.53 x 2.43 in)
– Weight 620 g (1.37 lb)
– Installation Panel mounting
– Protection PCB conformal coating is optional and provided on request. If conformal coating is required, please contact Moxa.

Environmental Limits
– Operating Temperature -40 to 70°C (-40 to 158°F)
– Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
– Ambient Relative Humidity 5 to 95% (non-condensing)
– Ingress Protection IEC 60529, IP66
– Vandal Resistance EN 62262, IK8
– Altitude
2000 m
Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

Standards and Certifications
– EMI CISPR 32, FCC Part 15B Class A
– EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
– Freefall IEC 60068-2-31
– Railway Fire Protection EN 45545-2
– Safety UL 62368-1
– Shock IEC 60068-2-27, IEC 61373, EN 50155
– Vibration IEC 60068-2-64, IEC 61373, EN 50155
– Railway EN 50155 (complies with a portion of EN 50155 specifications)

MTBF
– Time 1,075,216 hrs
– Standards Telcordia SR332