QuPSU-GP241U – Gigabit Passive PoE Power Supply UK

Gigabit PoE power supply dedicated to all QuSpot, QuMax and QuMini antennas with installed Teltonika routers inside.

• Passive PoE power supply UK
• Output: 24 V, 1 A
• Input: AC 100-240 V, 50/60 Hz
• UK power cord
• Wall mount holder included
• CE, ATE, HIPOT
• Caution: Indoor use only

Electrical Input Specification

• Input voltage: 110 – 240 V AC
• Input frequency: 50 – 60 Hz
• Input current: Max. 2 A RMS
• Inrush current: Max. 30 A
• AC leakage current: Max. 3.5 mA
• Efficiency: Min. 80% @ 100 V AC, 84% @ 240 V AC
• Dielectric strength (primary to secondary): 3 kV AC/5 mA/1 s
• Input socket: IEC320-C6
• AC power cord: 0.75 m length, 3 pins UK plug

Electrical Output Specification

• Output voltage: 24 V DC
• Min. load: 0 A
• Max. load: 1 A
• Output power: 24 W
• Line regulation: ± 3%
• Load regulation: ± 5%
• Ripple: 240 mV pp
• Turn on delay time: max. 5 s
• Rise time: max. 40 ms
• Hold up time: min. 5 ms
• Overshoot: max. 15%
• Protections: Short circuit, over current (110 – 200% of DC output)
• Ethernet ports: Input (LAN): 1x RJ45 10/100/1000 Mbps; Output (PoE): 1x RJ45 10/100/1000 Mbps
• PoE mode: Mode B: Pins 4,5 +/pins 7,8 –
• LEDs: Green: Power supply is on; Blue: PoE device connected

Other

• MTBF: 30,000 operating hours confidence-level at 80% load, 25°C
• Operating temperature: -10°C – +40°C
• Storage temperature: -20°C – +85°C
• Humidity: 5% @ 0°C, 90% @ 40°C
• Size: 84 x 44 x 30 mm (LxWxH)
• Safety: CE: EMC; LVD; FCC Part 15 Class B; EN55022 Class B; EN55024