Shuttle’s BPCAL02 series of fanless box PCs are powered by Intel’s 12th generation Core processors (Alder Lake) and have a durable, robust housing. It has modular expansion options for a wide range of interfaces and mounting options. With advanced technology and flexible design, this industrial PC offers a reliable solution for a variety of customised requirements in industrial environments.

–Fanless and quiet
Equipped with passive cooling, therefore no fan noise
Ideal for noise-sensitive environments
Less contamination from dust – therefore virtually maintenance-free

–24/7 continuous operation
This device is officially approved for 24-hour continuous operation (24/7).
Prerequisite: Free air circulation in the PC’s environment.

–Housing
Durable and robust housing made of aluminium and steel.
Passive cooling system with specially designed cooling fins ensures maximum heat dissipation.
Dimensions: 16.9 x 24.5 x 5.7 cm (LWH) = approx. 2.7 litres
Weight: 2.85 kg net (barebone without RAM/SSD and optional extensions)
Protection class: IP30

–Operating position/mounting
1) Feet: The device can be placed horizontally on its feet.
2) VESA mounting: The device can be attached to a wall or a large display using an optional 75 mm x 75 mm VESA mount. The VESA mount is screwed onto the top of the BoxPC with four M4x6L screws.
3) Side mounts (MRS01 contains 2 mounts): The device can be attached to surfaces using two optionally available ear-mount brackets and four M4 screws (mounting grid: 256 mm x 100 mm).
4) DIN rail clips (2x MDR01): The device can be mounted on a standard 35 mm top-hat rail (DIN rail), e.g. in a switch cabinet. This requires two standard DIN rail clips, each of which is attached to the underside of the BoxPC with two M3 screws (hole spacing: 47.5 mm).
Notes: The VESA, ear-mount bracket and DIN rail clips are not included in the scope of delivery.
Vertical mounting is permitted in any orientation.

–Operating system
This barebone system is supplied without an operating system.
It is compatible with Windows 10/11 (64-bit) and Linux (64-bit).

–Processor
Model: Intel Core i3-1215U (ULV)
Intel Gen12 ULV processor, codename: “Alder Lake-U”
System-on-a-chip architecture (SoC) with integrated memory and graphics controller
FCBGA1744 housing – soldered directly onto the mainboard
Processor cores: 6 in total
– Performance cores: 2 P cores (4 threads) with 1.2 / 4.4 GHz base/turbo frequency
– Efficiency cores: 4 E cores with 0.9 / 3.3 GHz base/turbo frequency
Smart cache: 10 MB
Power dissipation (TDP): max. 15 W
Manufacturing process: Intel 7 (10 nm)
Maximum junction temperature: 100 °C

–Integrated graphics
Intel® UHD graphics function with 64 execution units (AE)
Maximum dynamic graphics frequency: 1.10 GHz
Up to four independent displays
with up to 4K/60Hz (Ultra HD 3840×2160 resolution) are supported.

Display connection external connection onboard Remark
No. 1 HDMI 2.0b (on the back panel) — permanently installed
No. 2 optional: HDMI, DP, DVI-I, VGA 21-pin DDI onboard
No. 3 optional: HDMI, DP, DVI-I, VGA 21-pin DDI onboard
No. 4 optional: DP, VGA 31-pin eDP onboard no PnP *)
*) Note: the fourth connection does not support plug-and-play
The following optional accessories for additional graphics connections are available:
1) HDMI 1.4 (DHD01)
2) HDMI 2.0b (DHD11)
3) DisplayPort 1.2 (DDP01)
4) DVI-I (DDV01)
5) VGA / D-Sub (DVG01)

–UEFI BIOS
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports power on by RTC alarm
Supports booting from M.2SSD cards and USB devices
AMI BIOS in 64 MB EEPROM with SPI interface
Supports hardware monitoring and watchdog function
Supports the Unified Extensible Firmware Interface (UEFI)
Supports Intel vPro Essential

–TPM module
H/W-TPM V2.0: Hardware Trusted Platform Module V2.0 (Infineon SLB9670VQ2)

– Power supply unit
DC plug: 5.5/2.5 mm (outer/inner diameter)
AC cable: 3-pin, approx. 1.8 m long, with CEE-7/7 plug with earthing contact (type E+F) for connection to the socket
Note: The DC input voltage range of the Box PC can optionally be extended to 9-36 V (accessory VOL01).

External power supply unit – Operating temperature – Output power – AC input – DC output – AC cable
Supplied model – 0 to +40°C – Max. 90 W – 100-240V, 50/60Hz – 19V, max. 4.74A – Schuko to IEC 60320 C5
PA1501 (optional [1]) – -20 to +60°C – Max. 150 W(95W at 60°C) – 90-260V, 50/60Hz – 19V, max. 7.89A – Schuko to IEC 60320 C13

–Memory support [1]
2x SO-DIMM slot with 262 pins
Supports DDR5-4800 (PC5-38400) SDRAM with 1.1 V
Supports dual-channel mode
Supports a maximum of 32 GB per slot
Total capacity maximum 64 GB

–M.2slot for SSDs [1]
The M.2 2280 M slot offers the following interfaces:
– PCI-Express Gen. 4.0 x4
– SATA v3.0 (max. 6 Gbit/s)
M.2 plug-in cards used must be 22 mm wide
and can have a length of 42 or 80 mm (type 2242, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M-Key), automatic interface detection

–Sound function
Audio Realtek® ALC888S High-Definition Audio
Two analogue 3.5 mm audio connections on the rear:
1) 2-channel line-out (headphones)
2) Microphone input
Digital multi-channel audio output via HDMI and optional DisplayPort

–Dual 2.5G network
Two RJ45 network connections with Intel i226V Ethernet controller
Supports 10 / 100 / 1000 / 2500 MBit/s data transfer rate
Supports WAKE ON LAN (WOL) and booting from the network via Preboot eXecution Environment (PXE)

–Rear connections
Power button
HDMI 2.0b
4x USB 3.2 Gen 2 Type A (max. 10 Gbps)
2x Intel 2.5G LAN (RJ45, i226V)
Serial COM port (RS232)
Microphone input (3.5 mm)
Audio line-out / headphones (3.5 mm)
DC input for external power supply (2.5 / 5.5 mm)

–Optional connections on the front
The front is divided into four areas that can be fitted with optional expansion kits with daughter boards to equip the device with additional connections. Attention: Opening the barebone and installing optional components is reserved for trained specialists!
1) up to 3 additional graphics ports:
– HDMI 2.0b(DHD11)
– HDMI 1.4(DHD01)
– DisplayPort 1.2(DDP01)
– DVI-I(DDV01)
– D-Sub/VGA(DVG01)
Attention: HDMI and DVI are only possible twice additionally
2) one COM port RS232(CRS01)
3) two COM ports RS232/RS422/RS485 – occupies two areas(CSD01)
4) 4x USB 2.0 – this kit can be installed twice (Note: USB 2.0 ports allow up to 500mA/2.5W output power. If only low-power devices such as mouse/keyboard are connected, 4 USB kits can also be used)(USB01)
5) Up to four digital I/O expansions – each with 4 inputs and 4 outputs(DIO11) [2]
6) Input for vehicle ignition lock for delayed switching on/off of the BoxPC(DIO01)
7) LTE/4G kit with external antennas(LTE01)
Note: LTE card (M.2-3042) and nano SIM card are not included. Key B) and nano SIM card
8) Screw terminals for cable to connect an external power button(PWR01)

-Other optional accessories
1) DC input with extended voltage range: 9-36 V, instead of only 19 V(VOL01)
2) Ear mount brackets, mounting dimension: 256 mm x 100 mm(MRS01)
3) DIN rail clip (this special clip has holes without thread)(2x MDR01)
4) WLAN module with two external antennas(WMAX2001+CWL01)

–Ambient parameters
Option – Operating temperature – Relative humidity Standard Relative humidity
Standard 0 to +40 °C 20-80 % non-condensing
Industrial [1] -20 to +60 °C 20-80 % non-condensing
Note [1]

–Conformity and certificates
EMI: CE, FCC Class A, VCCI, RCM, BSMI
Safety: CB, cTUVus, BSMI
Other: RoHS, ErP, CEC
This device is classified as a Class A information technology equipment (ITE) and is primarily intended for use in commercial and industrial environments. The CE mark confirms conformity with the following EU directives:
(1) Directive 2014/30/EU on electromagnetic compatibility (EMC),
(2) Directive 2014/35/EU on the safety of electrical equipment (LVD),
(3) Directive 2009/125/EC on ecodesign of energy-related products (ErP)

[1]For safe operation in the extended operating temperature range (-20 to +60°C), the optional 150W power supply unit (PA1501) is required and industrial-grade RAM/SSD components with an operating temperature range of -40 … +85 °C are also required.
[2]The DIO extension (DIO11) is supplied with the appropriate connector. The digital inputs recognise “Low” at 0-3 volts and “High” at 5-30 volts (or open contact). The digital outputs tolerate 0-30V (open collector) with max. 30 mA current.