FANLESS 1-LITRE PC FOR CONTINUOUS OPERATION
This fanless PC system is based on the Shuttle XPC slim Barebone DL30N with an economical 12th generation Intel “Alder Lake-N” processor. Two Intel 2.5G network ports provide excellent network connectivity and the integrated graphics are based on Intel’s powerful Intel UHD Graphics with hardware acceleration for 4K videos. This slim PC is virtually silent, offers good processor performance and a wide range of connectivity options at a moderate price. It is ideal for everyday tasks such as office and multimedia applications.

SLIM DESIGN
– Slim 1.35-litre metal housing, black
– Silent, fanless cooling system
– Dimensions: 19 x 16.5 x 4.3 cm (LWH)
– With VESA mount (75/100 mm)
– Supports 24/7 continuous operation
– Operating temperature: 0-40 °C (non-condensing)

OPERATING SYSTEM
– Windows 10 IoT Enterprise LTSC 2021 (64-bit)

PROCESSOR
– Intel N100 processor, 4 cores, 3.4 GHz turbo clock, TDP: 6W
– Codenamed “Alder Lake-N”, Intel 7 process technology (10 nm)
– Soldered SoC processor with fanless cooling

GRAPHICS
– Integrated Intel UHD graphics with 4K support
– Supports three independent displays (HDMI, DP, VGA)

RAM MEMORY
– 8 GB DDR5-4800 SO-DIMM module

RUNS – SATA / M.2
– 128 GB M.2 SSD (supports PCIe/NVMe)
– 1x 2.5″ slot supports SATA hard disk or SSD, max. 9.5 mm
– 1x M.2-2230E slot (supports optional WLAN cards)

CONNECTORS
– HDMI 2.0b
– DisplayPort 1.4
– D-Sub/VGA
– 8x USB 3.2 Gen1 (blue)
– 2x Intel 2.5 GbE LAN (i226)
– 2x COM port (1x RS232/422/485)
– 2x Audio (Line out, Micr.)
– Connection for external power button
– “Always-On” jumper
– DC input 12 V / 19 V

POWER SUPPLY
– External 65W/19V power supply unit (DC input supports 12 V and 19 V)

OPTIONAL ACCESSORIES
– Rackmount-Kit (PRM01)
– Cable for external power button (CXP01)
– DIN rail kit (DIR01)
– LTE kit (WWN03)
– Stand (PS02)
– WLAN kit with two external antennas (WLN-M1)

MODELS OF THE DL30N SERIES
– Product: DL3000EP
– Type: System
– Processor: Intel N100
– RAM: 8 GB DDR5
– SSD: 128 GB M.2 NVMe
– Operating system: Windows 10 IoT LTSC

SHUTTLE XPC SLIM SYSTEM DL3000EP – SPECIFICATION
FANLESSAND QUIET
– Passive cooling through heat flow (convection)
– No fan, therefore virtually silent
– Ideal for noise-sensitive environments
– Less contamination from dust – therefore virtually maintenance-free

24/7 CONTINUOUS OPERATION
– This device is officially approved for 24-hour continuous operation (24/7).
– Requirements:
Free air circulation around the PC
Freely accessible ventilation holes on the device.
If a hard disk is installed, this must also be approved by the manufacturer for 24/7 operation.

HOUSING
– Slim PC with black metal housing
– Dimensions: 19 x 16.5 x 4.3 cm (LWH) = 1.35 litres
– Weight: 0.8 kg net and 2.1 kg gross
– Two openings for Kensington Lock and numerous
– M3 threaded openings on both sides of the housing.

OPERATING POSITIONS
1) Horizontal
2) Vertical with screwed-on feet.
– The feet are available as optional accessory PS02.
3) Vertical with VESA mount (e.g. behind a suitable screen)
– In vertical position, please align the front USB ports upwards.
– The ventilation holes must always remain freely accessible to ensure sufficient cooling.

OPERATING SYSTEM
– Windows 10 IoT Enterprise LTSC 2021 (64-bit)

PROCESSOR
– Model: Intel® Processor N100
– Max. Turbo clock frequency: 3.4 GHz
– Codename: “Alder Lake-N”
– 10 nm manufacturing process, FCBGA1338 package (soldered)
– CPU cores / threads: 4 / 4
– L2 cache: 6 MB
– Power dissipation (TDP): 6 W
– System-on-Chip processor (SoC) with integrated graphics function, no chipset required

INTEGRATED GRAPHICS FUNCTION
– The graphics function (GPU) is integrated in the processor
– Intel® UHD Graphics, GPU clock frequency: max. 750 MHz
– Supports DirectX 12.1, OpenGL 4.6, OpenCL 3.0, Intel Quick Sync Video
– Execution Units (EU): 24
– Triple display support via three video outputs:
HDMI 2.0b: max. 4096 x 2160 @ 60 Hz
DisplayPort 1.4a: max. 4096 x 2160 @ 60 Hz
D-Sub/VGA: max. 1920 x 1200 resolution @ 60 Hz
– Supports two digital displays and one analogue display simultaneously.
– The D-Sub/VGA port supports two digital displays and one analogue display simultaneously. The D-Sub/VGA connection does not support a hot-plug function.

UEFI FIRMWARE
– 32 MB Flash ROM with AMI Aptio UEFI BIOS Firmware
– Based on the Unified Extensible Firmware Interface (UEFI)
– Supports the function “Switch on after power failure” and “always-on” [3]
– Supports Wake-on-LAN (WOL) from the S3, S4, S5 ACPI modes
– Supports booting from external USB flash storage media
– Integrated firmware TPM v2.0 (fTPM) [5]
– CMOS battery (type CR2032)

MEMORY

– 8 GB DDR5-4800 memory module in SO-DIMM format (262 pins)
– Supports a memory module with max. capacity of 16 GB 2.5 GB memory module in SO-DIMM format (262 pins). 16 GB capacity

2.5″ DRIVE SHAFT FOR HDD AND SSD
– Supports a drive in 6.35cm/2.5″ format (hard drive or SSD)
– Serial ATA III interface with max. 600 MB/s
– Supports drives with a maximum height of 9.5 mm
– Pre-installed SATA cable (data / power)
– Supports the Unified Extensible Firmware Interface (UEFI)

M.2SSD CARD
– 128 GB M.2 SSD card in M.2-2280 format
– M.2-2230E

SPACE FOR OPTIONAL WLAN CARDS
– Interfaces: PCI-Express Gen. 3.0 X1 and USB 2.0
– M.2-2230 usedplug-in cards used must be 22 mm wide and 30 mm long (type 2230)
– Supports WLAN expansion cards (optional Shuttle accessory: WLN-M1)

AUDIO FUNCTION
– Realtek ALC888S audio codec
-Two analogue 3.5 mm audio connections:
1) Line-out (headphones)
2) Microphone input
– Digital multi-channel audio output via HDMI and DisplayPort

DUAL 2.5G NETWORK
– Two RJ45 ports support LAN with 100/1000/2500 Mbps.
– 2x Intel i226-LM Ethernet Controller
– Supports Wake-on-LAN

LEDS & BUTTONS
– Power on/off button
– LED as power indicator (blue)
– LED as hard drive activity indicator (yellow)

CONNECTORS FRONT
– 4x USB 3.2 Gen 1 Type A (blue, max. 5 Gbit/s)
– Audio line-out (headphones) 3.5 mm
– Microphone input 3.5 mm

REAR CONNECTORS
– HDMI 2.0b digital video and audio output
– DisplayPort 1.4a digital video and audio output [2]
– D-Sub/ VGA analogue video output (15-pin) – no hot plug
– 4x USB 3.2 Gen 1 Type A (blue, max. 5 Gbit/s)
– 2x network 2.5 Gbit/s (Intel i226-LM, RJ45)
– 2x RS232 serial port, 9-pin. D-Sub (supports 5 V / 12 V auxiliary voltage, the left port can be switched to RS422 / RS485) [4]
– DC input for the external power supply unit (supports 12V and 19V)
– Four-pin connector (2,54 mm pitch) supports
external power-on button
Clear CMOS function
5 V DC voltage for external components
– 2x perforation for optional wireless LAN antennas

OTHER ONBOARD CONNECTIONS
– COM1/COM2 connectors for serial interfaces (occupied)
– Jumper JP1 for Power-On-after-Power-Fail (hardware solution) [3]
– USB 2.0 header CN1 (4-pin) is required for the WWN03 accessory

POWER SUPPLY
– External 65 W power supply unit (fanless)
– AC input: 100 – 240 V AC, 50-60 Hz, max. 1.6 A
– DC output: 19 V, max. 3.42 A, max. 65 W
– Automatic AC voltage detection
– Length of DC cable: approx. 180 cm
– Length of the AC mains cable: approx. 180 cm (3-pin with C6 cloverleaf and Schuko plug)

DC INPUT
– DC plug: 5.5 / 2.5 mm (outer / inner diameter)
– The DC input of the computer supports an external power supply with 12 V ±5% (max. 5.42 A) or 19 V ±5% (max. 3.42 A).

SCOPE OF DELIVERY
– Multilingual installation instructions (DE, EN, FR, ES, JP, KR, SC, TC)
– VESA bracket for 75 / 100 mm standard (two metal brackets)
– Four M3 x 5 mm screws (connects VESA bracket to PC)
– Four M4 x 10 mm screws (connects VESA bracket to external mounting)
– Four M3 x 4 mm screws (for mounting a 2.5″ drive)
– Two M2 screws (for mounting M.2-cards)
– Driver DVD (Windows 64-bit)
– External 65 W power supply unit with power cable (with earthing contact)

OPTIONAL ACCESSORIES
– PS02: Optional feet for vertical operation
– CXP01: Adapter cable for an external power button
– PRM01: 2U rack panel for two Shuttle XPC slim PCs
– DIR01: DIN rail mounting kit
– WLN-M1: WLAN module in M.2-format supports Wi-Fi 6 (IEEE 802.11ax) and BT 5.2 with two external antennas and cables
– WWN03: LTE kit with adapter card, 2 antennas and antenna cable supports one M.2 LTE module and a nano SIM card [1]

ENVIRONMENTAL PARAMETERS
– Permissible operating temperature range: 0 – 40 °C
– Permissible relative humidity: 10 – 90% (non-condensing)

CERTIFICATESAND CONFORMITY
– MI: CE, UKCA, FCC, RCM, VCCI, BSMI
– Safety: CB IEC 60950-1/62368-1, cTUVus (UL 62368-1), BSMI
– Other: RoHS, Energy Star, ErP
– This device is categorised as Class B information technology equipment (ITE) and is primarily intended for use in residential and office environments. The CE mark confirms conformity with the following EU directives:
(1) Directive 2014/30/EU on electromagnetic compatibility (EMC)
(2) Directive 2014/35/EU on the safety of electrical equipment (LVD)
(3) Directive 2009/125/EC on the ecodesign of energy-related products (ErP)