Fanless and quiet
Passive heatpipe cooling, no fan noise
Ideal for noise-sensitive environments
Less contamination from dust – therefore practically maintenance-free

24/7 continuous operation
– This device is officially approved for 24-hour continuous operation (24/7).
– Requirements:
Free air circulation around the PC
Freely accessible ventilation holes on the device.
If a hard disk is installed, this must also be approved by the manufacturer for 24/7 operation.

IP54 protection class
– The front of the device is protected against dust and splash water in accordance with protection class IP54.

Housing
– Colour: black or white
– Dimensions: 39.1 x 32.7 x 4.2 cm (WxHxD)
– 100mm VESA mount
– Mounting hole for Kensington Lock
– Weight: 3.5 kg net, 4.2 kg gross

Operating system
– This system is supplied without an operating system.
– It is compatible with:
Windows 10/11 – 64-bit
Linux – 64-bit

Touchscreen
– Screen for touch input with the finger.
– Resistive 5-wire technology for touch input with the finger. Resistive 5-wire technology for one-finger operation (single touch)
– Included stylus for the touchscreen

39.6cm display (15.6″)
– 39.6 cm / 15.6″ LC display, aspect ratio: 16:9 wide screen
– Resolution: 1366 x 768 = 1.05 megapixels
– Backlight: High-performance LED, brightness: 220 cd/sqm
– Glass thickness: 3.2 mm

Processor
– Model: Intel Celeron 7305
– Codename: Alder Lake-U (12. Generation Intel Core)
– Performance cores (P-cores): 1 core (1 thread), clock speed: 1.1 GHz
– Efficiency cores (E-cores): 4 cores (4 threads), clock speed: 0.9 GHz
– Smart cache (L3): 8 MB
– Power dissipation (PL1 TDP): max. 15 W
– Maximum junction temperature: 100 °C
– System-on-a-chip architecture (SoC) with integrated memory and graphics controller
– BGA1700 housing – soldered directly onto the mainboard
– Manufacturing process: Intel 7 process (improved 10 nm process)

Integrated graphics
– Intel UHD Graphics
– Graphics clock frequency: max. 1100 MHz
– Execution units (EUs): 48

Up to three displays simultaneously
– Two video outputs support two additional independent monitors
1) HDMI 2.0b digital audio/video output supports up to 3840 x 2160 pixel resolution at 60 Hz refresh rate (2160p60)
2) VGA / D-Sub analogue video output supports up to 1920 x 1080 pixel resolution at 60 Hz refresh rate (1080p60)
– In multi-monitor mode, the following conditions apply:
1) In clone mode, all displays show the same image in 1366×768 resolution
2) In extended mode, all displays can show different content

BIOS
– AMI BIOS in 32 MByte EEPROM with SPI interface
– Supports the “switch on after power failure” and “always on” function
– Supports Wake-on-LAN (WOL) from the S3, S4, S5 ACPI modes
– Supports hardware monitoring and watchdog function
– Supports firmware TPM v2.0 function

Memory
– 2x SO-DIMM slot with 262 pins
– Supports DDR5-4800 (PC5-38400) SDRAM with 1,1 V
– Also supports DDR5 memory modules with higher frequency specification
– Supports dual-channel mode
– Supports maximum 32 GB per slot
– Total capacity maximum 64 GB
– Supports unbuffered DIMM modules (no ECC or registered)
– Two thermal pads for the RAM modules are included in the scope of delivery

Hard disk / SSD
– Supports one SATA hard disk or one SATA SSD drive in 6,35 cm / 2.5″ format
– The SATA 3.0 interface supports up to 600 MB/s data rate (6 Gbit/s)
– Supports a drive with a height of up to 9.5 mm
– Pre-installed SATA cable with power supply available

Two M.2-2280-slots for SSD cards
– This product has two M.2-2280 Key-M slots
– M.2 cards with 22 mm width and 80 mm length are supported (type 2280)

– One M.2 SSD card with PCIe/NVMe interface is supported
– The second M.2 SSD card must have a SATA interface.SSD card must have a SATA interface
– the second slot can also be used for the optional WWN04 kit to install a 4G/5G network module.

Webcam
– Integrated camera module with Full HD resolution (1920 x 1080)

Microphone and speakers
– Condenser microphone and 2x 2 W speakers are integrated in the housing

Audio function
– Realtek ALC888S (HD audio)
– Two analogue 3.5 mm audio connectors on the bottom:
1) Line-out (headphones)
2) Microphone input
Digital multi-channel audio output is possible via the HDMI.

Network
– Intel i219 Ethernet Controller
– Supports 10 / 100 / 1,000 MBit/s data transfer rate
– Supports WAKE ON LAN (WOL) from S3 and S4 mode
– Supports booting from the network via Preboot eXecution Environment (PXE)

Wireless network (WLAN)
– WLAN controller card: Realtek RTL8821CE
– WLAN antennas: two internal antennas
– Supports WiFi IEEE 802.11b/g/n/ac in the 2.4 / 5 GHz band, 1T1R
– Supports 20 / 40 / 80 MHz channel bandwidth
– Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
– Supports Bluetooth 4.2 in the 2.4 GHz band
– The M.2-2230 Key A+E slot supports PCIe Gen3 x1, USB 2.0 and CNVi

Front LEDs
– Power indicator (blue)
– Hard drive/SSD LED (orange)

Connectors on the left
– On/off button
– 2x USB 3.2 Gen 1 (max. 5 Gbit/s, blue)
– Hole with concealed on/off button (onboard micro button)
– Hole with concealed Clear CMOS button (onboard micro button)

Bottom connections
– HDMI 2.0b (supports digital video and digital audio)
– VGA connection (D-Sub 15-pin, analogue video)
– 2x USB 3.2 Gen 2 (max. 10 Gbit/s, red)
– 2x USB 3.2 Gen 1 (max. 5 Gbit/s, blue)
– Gigabit network (RJ45, Intel i219)
– Audio line-out / headphones (3.5 mm jack socket)
– Microphone input (3.5 mm jack socket)
– Input for external power supply unit (5.5 / 2.5 mm)
– Optional: 2x COM/serial D-Sub (1x RS232, 1x RS232/422/485)

Onboard connections
– Internal USB 2.0 type A connection for USB stick
– Serial ATA (6 GBit/s) cable for data and power supply
– 2x serial interfaces for optional COM ports (each 2×5-pin, 2 mm pitch)
– Other available connections are occupied by integrated components.

Holes for four optional antennas
– The housing has four perforated 6.5 mm holes
– For mounting optional antennas with (RP) SMA connection
– For wireless data transmission via WLAN or WWAN (e.g. 4G/5G)
– (see section “Optional accessories”)

Power supply
– External 90 W power supply (fanless)
– Input: 100-240 V AC, 50/60 Hz, max. 1.6 A
– Output: 19 V DC, max. 4.74 A, max. 90 W
– Length of DC cable: approx. 170 cm
– Length of AC mains cable: approx. 170 cm (3-pin with C6 cloverleaf and Schuko plug)

DC input
– DC plug: 5.5 / 2.5 mm (outer/inner diameter)
– The DC input of the computer supports a
– external power supply with 12V±5% or 19V±5%.

Accessories included:
– Multilingual quick start guide
– Driver DVD for Windows
– External power supply (90W / 19V)
– Power cable with earthing contact
– 2x thermal pad for SSD M.2 cards: 70 x 20 x 5.25 mm
– 2x thermal pad for RAM modules: 50 x 15 x 2.25 mm and 70 x 20 x 4 mm
– 3x M3x4 silver screws for mounting M.2SSD cards
– 4x screws M3x4 black for mounting a 2.5″ SATA drive

Optional accessories:
1) WLAN kit WLN-M1(Intel AX200 card + two external antennas)
An 802.11ac (1T1R) WLAN function with internal antennas is already pre-installed and can be upgraded to 802.11ax (2T2R) with two external antennas with this kit.

2) 4G/5G kit WWN04
This kit contains an adapter board for the lower M.2-2280 slot (CN5) and4G/5Gantennas.slot (CN5) and 4 external antennas.
These components are also required for data transmission in the mobile network:
– a 4G/LTE card in M.2-3042 format or a 5G card in M.2-3052 formatformat
– an activated nano SIM card

3) COM port adapter 2x PCP11
for two serial COM ports (1x RS232, 1x RS232/422/485) on the underside

Permitted environmental parameters
– Operating temperature: 0-40 °C
– Humidity: 10-90 %, non-condensing

Certificates
– EMI certificates: CE, UKCA, FCC, BSMI, RCM, VCCI
– Safety certificates: CB (IEC 60950/62368), cTUVus (UL 62368), BSMI
– Other conformities: RoHS, ErP Lot3, Energy Star v8.0

Conformity
This device is categorised as Class B information technology equipment (ITE) and is primarily intended for use in residential and office environments. The CE mark confirms conformity with the following EU directives:
(1) Directive 2014/30/EU on electromagnetic compatibility (EMC),
(2) Directive 2014/35/EU on the safety of electrical equipment (LVD),
(3) Directive 2009/125/EC on the ecodesign of energy-related products (ErP) and
(4) Directive 2014/53/EU on radio equipment (RED: Radio Equipment Directive)