Feed-in splitter with 3 inputs for several terrestrial bands. Includes mast housing for outdoor installation.
Allows power to pass from the output to the UHF input to supply a mast amplifier or a BOSS system with power.

Highlights
– EasyF connection system: a simple, fast and secure connection technology
– Cast housing with very good shielding properties

Features
– DC pass-through
– Robust ABS plastic housing for outdoor use

Good to know

EasyF connection system: simple and fast

EasyF is an innovative connection concept in which the inner conductor of the coaxial cable is inserted directly into the device, which improves the reliability of the connection. Without the F connectors, the chassis can be reduced and the connection of two cables can be secured with a single screw.

– Time saving: Quick installation is possible as a connector does not have to be fitted to the coaxial cables first. In addition, the connectors do not need to be screwed to the device, which is sometimes difficult when space is limited.
– Connection reliability: The clamp that holds the cables prevents the coaxial cable from coming loose.
– Cost savings: No additional connections required (neither F nor IEC).
– Space optimisation: inputs and outputs are always on the same side of the device to prevent the coaxial cables from bending and to make it easier to work in cabinets and registration boxes.
– Very simple three-step assembly: to connect the two cables, simply unscrew the front plates and screw them back on:
1. Unscrew the front plate of the distributor to access the connection.

2Insert the previously stripped coaxial cables.

3. Close the front panel and screw it tight to ensure the connection.

Learn more about the reliability of EasyF connection technology

With EasyF connections, the connection between the coaxial cable and the device is made using an automated system for contacting the inner conductor without additional solder joints.

– Always as good as new: The service life of the device increases when the portion of the solder that wears out over time is removed.
– Failure rates, which are usually caused by cold solder joints, are reduced.
– Electromagnetic behaviour optimisation: for high frequencies.
– Our commitment to the environment is reinforced: No environmental pollution from welding and reduced power consumption during production.