Pre-assembled single-mode (SM) fibre optic patch cable with FC/UPC connectors for connecting units in an optical SAT IF installation. Equipped with a shielded stainless steel tube around the optical fibre as well as an aramid braid strain relief and a UV-resistant LSFH jacket.
Ideal for outdoor use and underground installation, as it has been specially developed to withstand adverse weather conditions.
Supplied in individual packaging.

– Low attenuation
– Aramid fibre protection and flexible stainless steel conduit
– Outstanding durability: the flexible stainless steel shield provides excellent mechanical resistance and protects the fibre against all types of physical stress: impacts, pulling, kicks…
– Glass fibre type G.657A2
– LSFH cover with UV protection, grey
– FC/UPC connectors
– Available in different lengths

Technical specifications
– Fibre types single mode (ITU-T-G.657A2)
– ## OS1
– Diameter fibre core μm 9
– Diameter fibre cladding μm 125
– Cladding diameter on fibre μm 250
– Cable structure fixed core
– Fibre structure diameter mm 0.8
– Outer cladding diameter mm 3
– Material outer cladding LSFH
– Gel for protection No
– Attenuation 1310nm dB/km < 0.4
– Attenuation 1490nm dB/km < 0.4
– Attenuation 1550nm dB/km < 0.3
– Insertion loss port 1 dB < 0.3
– Insertion loss port 2 dB < 0.3
– Return loss connection 1 dB > 50
– Return loss connection 2 dB > 50
– Optical port 1 type FC
– Ground joint type (Optical port 1) UPC
– Optical port 2 type FC
– Ground joint type (Optical port 2) UPC
– Short pull force N 440
– Strength increase element aramid fibres and flexible stainless steel tube
– Short break (@100mm) N 1000
– Minimum propagation velocity mm 30
– Operating temperature °C -20 … 70