SmartKom intelligent mast amplifier Automatic or manual programming via Bluetooth® (ASuite)

Filter, mix, amplify and equalise in a single touch
Compact and intelligent amplifier for mast installation with digital signal processing designed for single-family homes. It is equipped with multiple inputs to amplify terrestrial signals from up to 3 different antennas (both VHF/UHF bands), where each channel can be individually filtered by one of the 32 available programmable filters. In addition, it includes an input for mixing FM radio.
The amplifier is powered by a 12V household power supply (800 mA) that plugs into the coaxial installation and is supplied with power via its output connector.

SmartKom has an auto-programming function that allows the devices to programme and set themselves by simply pressing a button. In addition, thanks to the Bluetooth® antenna included in the power supply, manual or automatic programming of the amplifier can be done wirelessly using a smartphone or tablet with the ASuite app.

RED compliant

Highlights
– “All-in-one” device: combines the functions of several elements of a system such as filter, mixer and amplifier and provides complete signal distribution via a single coaxial cable
– Plug&Play: the amplifier programmes itself automatically and adjusts the channel level by pressing the auto-programming button. SmartKom automatically supplies power to the antenna if the signal requires it
– Digital processing of the channels: a perfect level balance is achieved at the output between the different channels, even between neighbouring channels
– Automatic gain control of the signal in each filter (AGC)
– Excellent signal quality: installing the device on the mast, immediately after the antenna, prevents signal degradation. Combining these amplifiers with an intelligent Televes antenna provides the best quality
– Digital filters with high selectivity (28dB @1MHz)
– SAW filter (Surface Acoustic Wave) for optimal suppression of 4G/5G phone interference
– Bluetooth®for wireless manual programming of the amplifier
– Bluetooth®) is also available via a smartphone or tablet with the ASuite app, eliminating the need for use on the mast

Features
– Secure configuration: In the event of a power failure, SmartKom saves the current configuration so that it does not need to be reconfigured
– High output level
– EasyF connection system: a reliable and secure system that saves installation time and requires no additional connectors
– LED indicators showing both setting and programming status
– Highly shielded die-cast housing
– UV-resistant ABS plastic housing for outdoor installation of products
– 100% European design and manufacture: Fully automated production subject to the strictest quality controls

Good to know
EasyF connection system: quick and easy

EasyF is an innovative connection concept in which the inner conductor of the coaxial cable is inserted directly into the device, improving connection reliability. Without the F connectors, the chassis can be reduced and the connection of two cables can be secured with a single screw.

– Time saving: Quick installation is possible as a connector does not have to be fitted to the coaxial cable first. In addition, the connectors do not need to be screwed to the device, which is sometimes difficult when space is limited.
– Connection reliability: The clamp that holds the cables prevents the coaxial cable from coming loose.
– Cost savings: No additional connections required (neither F nor IEC).
– Space optimisation: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending and make it easier to work in cabinets and registration boxes.
– Very simple three-step installation: To connect the two cables, simply unscrew the front panels and screw them back on:

1. Unscrew the front panel of the distributor to access the connection.
2. Plug in the previously stripped coaxial cables.
3.Close the front panel and screw it tight to ensure the connection.

Learn more about the reliability of EasyF connection technology
With EasyF connections, the connection between the coaxial cable and the device is made using an automated system for contacting the inner conductor without additional solder joints.

– Always as good as new: The service life of the device increases when the portion of the solder that has worn off over time is removed.
– Failure rates, which are usually caused by cold solder joints, are reduced.
– Electromagnetic behaviour optimisation: for high frequencies.
– Our commitment to the environment is reinforced: No environmental pollution from welding and reduced power consumption during production.