Twin converter with REMUX DVB-S/S2 into DVB-T (COFDM) or DVB-C (QAM), with CI

Channel strip for converting 4 satellite transponders DVB-S (QPSK) or DVB-S2 (QPSK/8PSK) from max. 2 satellite reception levels (4 tuners and 2 inputs) into two freely selectable DVB-T (COFDM) or DVB-C (QAM) output channels. 2 satellite reception levels (4 tuners and 2 inputs) into two freely selectable DVB-T (COFDM) or DVB-C (QAM) output channels.

Its CI interface and the corresponding CAM module convert encrypted channels into free DVB-T/T2 or DVB-C signals. Depending on the CAM module used (standard/professional), one or more services are decrypted.

The desired output modulation can be selected via an embedded web user interface.

Highlights

Embedded web user interface for module configuration:

– Selection of output modulation: COFDM (DVB-T) or QAM (DVB-C)
– Configuration of the entire headend, selecting one of the modules as master
– Automatic detection of the modules connected to the master
– Cloning function for replication and faster setup of typical installations
– Headend control indicators: module temperature, CAM status ..
– Access to the headend configuration via a self-created WiFi network (using the kit with ref. no. 216802)
– Complete or selective removal of individual services so that they are not unintentionally detected (and saved) by the receivers (STB)
Adjacent channel capability
– Supports LCN (Logical Channel Numbering) for individual channel sequencing to simplify the receiver scan
– Programme filtering required to adapt to the maximum output data rate. Information about the utilisation of the output signal
– Monitoring and signal status display via LEDs

Features

– The outputs can also be configured both in loop-through mode and independently of each other
– Service decryption after insertion of a corresponding CA module incl. card
– Filling with zero packets (stuffing unit) for a fast scan in the receiver or when using a receiver with fixed symbol rates
– PIDs can be edited
– Editable TS_ID to facilitate programming of the receiver. Performs the channel scan based on the data listed above
– Network_ID, Original Network_ID, Cell_ID and S_ID editable