RUT951 offers dual SIM 4G mobile connectivity combined with Wi-Fi and 4 Ethernet interfaces to fulfil the requirements of a wide range of IoT solutions. Powered by RutOS, which offers customisation options for professional use, automation functions and security at the highest level for your solution.

MOBILE
– Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – up to 42 Mbps, 2G – up to 236.8 kbps
– 3GPP Release: Release 10/11 depending on hardware version
– SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection error, SIM idle protection
– Status: IMSI, ICCID, operator, operator status, data connection status, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
– SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
– USSD: Supports sending and reading of Unstructured Supplementary Service Data messages
– Black/white list: Black/white list of operators (by country or individual operators)
– Multiple PDN: Possibility to use different PDNs for multiple network accesses and services
– Band management: Band lock, display of the status of the band in use
– APN: Auto APN
– Bridge: Direct connection (bridge) between mobile ISP and device in the LAN
– Passthrough: Router assigns its mobile WAN IP address to another device in the LAN

WIRELESS
– Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
– Wi-Fi security: WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, deactivation of Auto-Reconnect
– SSID/ESSID: SSID stealth mode and access control based on MAC address
– Wi-Fi users: Up to 100 simultaneous connections
– Wireless connectivity features: Fast roaming (802.11r), Relayd, BSS transition management (802.11v), Radio resource metering (802.11k)
– Wireless MAC filter: Whitelist, Blacklist
– Wireless QR code generator: Once scanned, a user automatically enters your network without having to enter any credentials.

NETWORK
– Hotspot: Captive portal (hotspot), internal/external radius server, radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 default customisable themes and the ability to upload and download custom hotspot themes
– Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
– Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
– VoIP passthrough support: H.323- and SIP-alg protocol NAT helpers that enable the correct routing of VoIP packets
– Connection monitoring: Ping reboot, Wget reboot, periodic reboot, LCP and ICMP for link inspection
– Firewall: Port forwarding, traffic rules, user-defined rules
– Firewall status page: Display all firewall statistics, rules and rule counters
– Ports management: display device ports, enable and disable individual ports, enable or disable automatic configuration, change transmission speed, etc.
– Network topology: Visual representation of your network, showing which devices are connected to which other devices
– Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 default customisable themes and the ability to upload and download customised hotspot themes
– DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
– QoS / Smart Queue Management (SQM): traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
– DDNS: Supports >25 service providers, others can be configured manually
– Network backup: Wi-Fi WAN, Mobile, VRRP, wired options, any of which can be used as automatic failover
– Load balancing: Balancing of Internet traffic across multiple WAN connections
– SSHFS: Ability to mount a remote file system via the SSH protocol

ETHERNET
– WAN: 1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
– LAN: 3 x LAN ports, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

SECURITY
– Authentication: Pre-shared key, digital certificates, X.509-certificates, TACACS+, Radius, blocking of IP and login attempts, time-based login blocking, integrated random generator for passwords
– Firewall: Preconfigured firewall rules can be activated via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
– Attack protection: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
– VLAN: Port and tag-based VLAN separation
– Mobile quota control: mobile data limit, customisable time period, start time, warning limit, phone number
– WEB filter: blacklist to block unwanted websites, whitelist to specify only allowed websites
– Access control: flexible access control of SSH, web interface, CLI and Telnet

VPN
– OpenVPN: multiple clients and a server can run simultaneously, 27 encryption methods
– OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
– IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
– GRE: GRE tunnels, GRE tunnels via IPsec support
– PPTP, L2TP: client/server instances can run simultaneously, L2TPv3, L2TP via IPsec support
– Stunnel: proxy for adding TLS encryption functionality to existing clients and servers without changes to the programme code
– DMVPN: Method for building scalable IPsec VPNs
– SSTP: Support for SSTP client instances
– ZeroTier: ZeroTier VPN client support
– WireGuard: WireGuard VPN client and server support
– Tinc: Tinc provides encryption, authentication and compression in its tunnels. Client and server support.

OPC UA
– Supported modes: Client, Server
– Supported connection types: TCP

MODBUS
– Supported modes: Server, Client
– Supported connection types: TCP
– User-defined registers: MODBUS TCP user-defined register block requests that can be read/written to a file within the router and used to extend MODBUS TCP client functionality
– Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATATO SERVER
– Protocol: HTTP(S), MQTT, Azure MQTT, Kinesis
– Data to server: Extracts parameters from multiple sources and different protocols and sends them all to a single server

MQTTGATEWAY
– MODBUS MQTT Gateway: Enables commands to be sent and data to be received from the MODBUS server via the MQTT broker

DNP3
– Supported modes: TCP Master, DNP3 Outstation

DLMS
DLMS support: DLMS – standard protocol for exchanging meter data

API
– Teltonika Networks Web API (beta) support: extend the capabilities of your device by using a range of configurable API endpoints to retrieve or modify data. For more information, please read this documentation: https://developers.teltonika-networks.com

MONITORING & MANAGEMENT
– WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, multiple event log servers, availability notifications for firmware updates, event log, system log, kernel log, internet status
– FOTA: Firmware update from server, automatic notification
– SSH: SSH (v1, v2)
– SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
– Call: Restart, status, mobile data on/off, outgoing on/off, answer/hang up with timer, Wi-Fi on/off
– TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
– MQTT: MQTT Broker, MQTT publisher
– SNMP: SNMP (v1, v2, v3), SNMP Trap
– JSON-RPC: Management API via HTTP/HTTPS
– RMS: Teltonika Remote Management System (RMS)

IOTPLATFORMS
– Cloud of Things: Enables monitoring of: Device data, mobile data, network information, availability
– ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile provider name, mobile network signal strength, mobile network type
– Cumulocity: Enables monitoring of: Device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, network provider, signal strength
– Azure IoT Hub: Can provide device IP, number of bytes sent/received, temperature, PIN count to Azure IoTHub server, mobile connection status, network connection status, IMEI, ICCID, model, manufacturer, Serial number, revision, IMSI, SIM status, PIN status, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number, connection type

SYSTEM CHARACTERISTICS
– CPU: Mediatek, 580 MHz, MIPS 24KEc
– RAM: 128 MB, DDR2
– FLASH memory: 16 MB, SPI Flash

FIRMWARE/ CONFIGURATION
– WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
– FOTA: Update FW
– RMS: Update FW/configuration for multiple devices at once
– Maintain settings: Update FW without losing the current configuration
– Reset factory settings: A full factory reset restores all system settings, including IP address, PIN and user data, to the manufacturer’s default configuration

FIRMWARECUSTOMISATION
– Operating system: RutOS (OpenWrt based Linux OS)
– Supported languages: Busybox shell, Lua, C, C++
– Development tools: SDK package with build environment provided
– GPL customisation: you can create your own custom firmware and website application by changing colours, logos and other elements in our firmware to suit your needs or those of your customers.

INPUT / OUTPUT
– Input: 1 x digital input, 0 – 6 V are recognised as logic low, 8 – 30 V are recognised as logic high
– Output: 1 x digital output, open collector output, max. output 30 V, 300 mA
– Events: Email, RMS, SMS
– I/O juggler: Enables the setting of specific I/O conditions to trigger events

POWER
– Connection: 4-pin industrial DC socket
– Input voltage range: 9 – 30 VDC, reverse polarity protection; overvoltage protection >31 VDC 10us max
– PoE (passive): Passive PoE via free pairs. Power supply option via LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt, mode B, 9 – 30 VDC
– Power consumption: < 2 W idle, < 7 W max

PHYSICAL INTERFACES
– Ethernet: 4 x RJ45 ports, 10/100 Mbps
– I/Os: 1 x digital input, 1 x digital output on 4-pin power connector
– Status LEDs: 1 x two-colour connection status, 5 x cellular connection strength, 4 x ETH status, 1 x power
– SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder, eSIM (optional)
– Antennas: 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi antenna connections
– Reset: Reboot/User default reset/Factory reset button

PHYSICAL DATA
– Housing material: aluminium housing, plastic panels
– Dimensions (W x H x D): 110 x 50 x 100 mm
– Weight: 287 g
– Mounting options: DIN rail, wall mounting, flat surface (all require additional kit)

OPERATING ENVIRONMENT
– Operating temperature: -40 °C to 75 °C
– Operating humidity: 10 % to 90 % non-condensing
– Protection class: IP30

REGULATORY & TYPE APPROVALS
– Regulations: CE, UKCA, ANRT, Kenya, CITC, ICASA, FCC, IC, PTCRB, RCM, Giteki, ECE R118, E-mark, CB, UL/CSA Safety, RoHS, REACH, C1D2
– Operator: AT&T, Verizon, T-Mobile

EMC EMISSIONS & IMMUNITY
– Standards: EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-52 V1.2.1
– ESD: EN 61000-4-2:2009
– Radiation immunity: EN 61000-4-3:2020
– EFT: EN 61000-4-4:2012
– Immunity to overvoltages (AC mains connection): EN 61000-4-5:2014 + A1:2017
– CS: EN 61000-4-6:2014
– DIP: EN 61000-4-11:2020

RF
– Standards: EN 300 328 V2.2.2
EN 301 511 V12.5.1
EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1

SAFETY
– Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)

SAFETY(ORDINARY LOCATIONS)
– Standards
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd Ed, Rev. 13 December 2019), C22.2 No. 62368-1:19 (3rd ed., Rev. 13 December 2019)

SAFETY (HAZARDOUS LOCATIONS)
– Standards: UL/CSA Safety: UL 121201, 9th Ed., Rev. 1 April 2021, CAN/CSA C22.2 No. 213, 3rd Ed. April 2021
– Hazardous Environments: Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, Group IIC
-40°C ≤ Ta ≤ 75°C, T4, IP30