The RUTC50 is a 5G router with dual-band Wi-Fi 6 technology with multi-user MIMO, ensuring ultra-high cellular speeds of up to 3.4 Gbps. This 5G router is also equipped with dual SIM with auto-failover, five Gigabit Ethernet ports and GNSS for precise location tracking. The RUTC50 supports both SA and NSA 5G architectures and is backward compatible with 4G (Cat 20) and 3G, ensuring robust and reliable performance.

Mobile
– Mobile module: 5G Sub-6Ghz SA/NSA 2.4/3.4Gbps DL (4×4 MIMO), 900/550 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 210Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
– 3GPP Release: Release 16
– SIM switch: 2 SIM cards, automatic switching in case of weak signal, data limit, SMS limit, roaming, no network, network denied, data connection error, SIM idle protection
– Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, bytes sent/received, connected band, IMSI, ICCID, SIM provider, operator, network type, cell ID, LAC, TAC, ARFCN, UARFCN, EARFCN
– SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
– USSD: Supports sending and reading of Unstructured Supplementary Service Data messages
– Black/white list: Black/white list of operators (by country or individual operators)
– Multiple PDN: Ability to use different PDNs for multiple network accesses and services
– Band management: Band lock, display the status of the band in use
– SIM idle protection service: For devices with two SIM slots, the currently unused slot remains idle until the device switches to it, so that no data on the card is used until then
– SIM PIN code management: SIM PIN code management allows the PIN of the SIM card to be set, changed or deactivated
– APN: Auto APN
– Bridge: Direct connection (bridge) between mobile ISP and device in the LAN
– Passthrough: The router assigns its mobile WAN IP address to another device in the LAN
– Framed routing: Framed routing: Support of an IP network behind 5G UE

Wireless
– Wireless mode: 802.11b/g/n/ac/ax (Wi-Fi 6) with data transfer rates of up to 2402Mbps on 5GHz, 576Mbps on 2.4GHz (Dual Band, MU-MIMO)
– Wi-Fi security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disabling auto-reconnect, 802.11w Protected Management Frames (PMF)
– SSID/ESSID: ESSID stealth mode
– WiFi users: Up to 512 simultaneous connections
– Wireless connectivity features: Wireless Mesh (802.11s), Fast Roaming (802.11r), BSS Transition Management (802.11v), Radio Resource Measurement (802.11k)
– Wireless MAC Filter: Whitelist, Blacklist
– Wireless QR Code Generator: Once scanned, a user is automatically added to your network without having to enter any credentials.

Ethernet
– WAN: 1 x WAN port 10/100/1000 Mbit/s, complies with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports Auto-MDI/MDIX crossover
– LAN: 4 x LAN ports, 10/100/1000 Mbit/s, complies with IEEE 802.3, IEEE 802.3u, 802.3az, supports Auto-MDI/MDIX-Crossover

Network
– Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
– Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
– VoIP passthrough support: H.323- and SIP-alg protocol NAT helpers that enable the correct routing of VoIP packets
– Connection monitoring: Ping reboot, Wget reboot, periodic reboot, LCP and ICMP for link inspection
– Firewall: Port forwarding, traffic rules, user-defined rules, TTL destination customisation
– Firewall status page: Display all firewall statistics, rules and rule counters
– Ports management: display device ports, enable and disable individual ports, switch autoconfiguration on and off, change transmission speed, etc.
– Network topology: Visual representation of your network showing which devices are connected to which other devices
– DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
– QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
– DDNS: Supports >25 service providers, others can be configured manually
– DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by forwarding DNS requests over HTTPS
– Network backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as automatic failover
– Load balancing: Balancing Internet traffic across multiple WAN connections
– Hotspot: Captive portal (hotspot), internal/external radius server, radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 default customisable themes and the ability to upload and download custom hotspot themes
– SSHFS: Ability to mount remote file systems via SSH protocol
– Traffic management: real-time monitoring, wireless signal graphs, traffic usage history

Security
– 802.1x: Port-based network access control client
– Authentication: Pre-shared key, digital certificates, X.509-certificates, TACACS+, internal and external RADIUS user authentication, blocking of IP and login attempts, time-based login blocking, integrated random generator for passwords
– Firewall: Preconfigured firewall rules can be activated via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
– Attack protection: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
– VLAN: Port and tag-based VLAN separation
– Mobile quota control: mobile data limit, adjustable time period, start time, warning limit, telephone number
– WEB filter: blacklist to block unwanted websites, whitelist to specify only permitted websites
– Access control: Flexible access control of SSH, web interface, CLI and Telnet
– SSL certificate creation: Let’s encrypt support

VPN
– OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
– OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
– IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
– GRE: GRE tunnels, GRE tunnels via IPsec support
– PPTP, L2TP: Client/server instances can run simultaneously, L2TPv3, L2TP via IPsec support
– Stunnel: Proxy for adding TLS encryption functions to existing clients and servers without changes to the programme code
– DMVPN: Method for building scalable IPsec VPNs, support for phase 2 and phase 3 and dual hub
– SSTP: Support for SSTP client instances
– ZeroTier: ZeroTier VPN client support
– WireGuard: WireGuard VPN client and server support
– Tinc: Tinc provides encryption, authentication and compression in its tunnels. Client and server support: Tailscale
– Tailscale offers speed, stability and simplicity over traditional VPNs. Encrypted point-to-point connections using the WireGuard open source protocol

OPC UA
– Supported modes: Client, Server
– Supported connection types: TCP

MODBUS
– Supported modes: Server, Client
– Supported connection types: TCP, USB
– User-defined registers: MODBUS TCP user-defined register block requests that can be read/written to a file within the router and used to extend MODBUS TCP client functionality
– Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATATOSERVER
– Protocol: HTTP(S), MQTT, Azure MQTT, Kinesis
– Data to the server: Extract parameters from multiple sources and different protocols and send all parameters to a single server; custom LUA scripting to allow scripts to use the router’s “Data to Server” feature

MQTTGateway
– Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS servers via MQTT broker

DNP3
– Supported modes: Station, Outstation
– Supported connection: TCP

DLMS
– DLMS support: DLMS – Standard protocol for exchanging meter data
– Supported modes: Client
– Supported connection types: TCP, USB

API
– Support for Teltonika Networks Web API (beta): extend the capabilities of your device by using a range of configurable API endpoints to retrieve or modify data. For more information, see this documentation: https://developers.teltonika-networks.com

Monitoring & Management
– WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, internet status
– FOTA: Firmware update from server, automatic notification
– SSH: SSH (v1, v2)
– SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
– Call: restart, status, mobile data on/off, outgoing on/off, answer/hang up with timer, Wi-Fi on/off
– Email: Receive email status messages for various services
– TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
– MQTT: MQTT-Broker, MQTT-Publisher
– SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force
– JSON-RPC: Management API via HTTP/HTTPS
– RMS: Teltonika Remote Management System (RMS)

IoTPlatforms
– ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile operator name, mobile signal strength, mobile network type
– Cumulocity – Cloud of Things: Enables monitoring of: Device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, network operator, signal strength. Features reboot and firmware upgrade actions
– Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports direct methods that allow RutOS API calls to be executed on the IoT Hub. Also features plug-and-play integration with the Device Provisioning Service, which enables zero-touch device provisioning for IoT Hubs

DOCKER
– Docker support: Supports the execution of isolated applications and services using Docker containers, enabling custom software environments and the deployment of microservices directly on the device

System features
– CPU: Mediatek, dual-core, 1.3 GHz, ARM Cortex A53
– RAM: 512MB DDR3
– FLASH memory: 16MB serial NOR flash, 512MB serial NAND flash

Firmware / configuration: WEB-UI
– WEB-UI: Update FW from file, check FW on server, configuration profiles, configuration backup
– FOTA: Update FW
– RMS: Update FW/configuration for multiple devices at once
– Maintain settings: Update FW without losing the current configuration
– Reset factory settings: A full factory reset restores all system settings, including IP address, PIN and user data, to the manufacturer’s default configuration

Location tracking
– GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
– Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
– NMEA: NMEA 0183
– NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
– Server software: Supported server software TAVL, RMS
– Geofencing: Configurable multiple geofence zones

USB
– Data rate: USB 2.0
– Applications: Samba sharing, USB-to-serial
– External devices: Option to connect an external hard drive, flash drive, additional modem, printer, USB-to-serial adapter
– Storage formats: FAT, FAT32, exFAT, NTFS (write-protected), ext2, ext3, ext4

Input / output
– Input: 1 x configurable digital input, 0 – 6 V are recognised as logic low, 8 – 50 V are recognised as logic high
– Output: 1 x configurable digital output, open collector output, max. output 50 V, 300 mA
– Events: Email, RMS, SMS
– I/O juggler: Allows specific I/O conditions to be set to trigger events

Power
– Connection: 4-pin industrial DC socket
– Input voltage range: 9 – 50 VDC, reverse polarity protection, protection against overvoltage/transients
– PoE (passive): Power supply option via the LAN1 connection, not compatible with the IEEE802.3af, 802.3at and 802.3bt, mode B, 9 – 30 VDC (Available from: HW revision 0003, batch number 007)
– Power consumption: Idle: < 4.5 W, Max: < 13.5 W

Physical interfaces
– Ethernet: 5 x RJ45 ports, 10/100/1000 Mbps
– I/Os: 1 x digital input, 1 x digital output on 4-pin power connector
– Status LEDs: 4 x WAN status LEDs, 3 x mobile connection type, 3 x mobile connection strength, 8 x LAN status, 1 x power, 2 x 2.4G and 5G Wi-Fi, 2 x WAN status
– SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder, eSIM (optional – other hardware required; contact your sales manager)
– Power: 1 x 4-pin power connector
– Antennas: 4 x SMA for cellular, 3 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
– USB: 1 x USB-A connector for external devices
– Reset: Restart/user default reset/factory reset button
– Miscellaneous: 1 x earthing screw

Physical specification
– Housing material: Anodised aluminium housing and panels
– Dimensions (W x H x D): 130.4 x 42.6 x 103.4 mm
– Weight: 452 g
– Mounting options: DIN rail, wall mounting, flat surface (all require additional kit)

– Operating environment
– Operating temperature: 40 °C to 75 °C
– Operating humidity: 10% to 90% non-condensing
– Protection class: IP30