With the TP-Link EAP211-Bridge KIT, you can easily establish a transparent connection over distances of up to 1 km. Thanks to the 802.11ac standard, it achieves connection speeds of up to 867 Mbps in the 5 GHz band. It supports technologies such as mesh, MU-MIMO and beamforming. For the most efficient deployment, the devices support automatic pairing and integration with Omada SDN for remote and centralised management.

Each device has (3) 10/100/1000Mbps Ethernet ports, a reset button and a ground connection. LEDs are located on the side of the device to indicate device status, Ethernet connection and signal level. The first of the Ethernet ports supports a passive POE 24V input, while the second power supply option is provided via a 12V DC connection. The devices are attached to the pole using the plastic ties supplied.

Efficient centralised network management
Thanks to Omada’s controller software, small and medium-sized enterprises can control hundreds of access points indoors and outdoors from a single location. This is network management as it should be – efficient and intuitive.

Specification
– 802.11ac for up to 867 Mbps on the 5 GHz wireless data rate.
– Ideal for wireless transmissions with a range of up to 1 km.
– Auto-pairing and agile LEDs for efficient deployment.
– 3 × Gigabit Ethernet ports for more high-speed IP camera connections.
– Supports Omada SDN for remote and centralised management.
– IP65 weatherproof housing and 6kV lightning protection for all-weather performance.
– Supports Passive PoE for flexible use (adapter included).

Package contents
– (2) device
– (2) 24V PoE power supply
– (2) power cables
– (4) plastic ties

Technical parameters
Wireless features
Sensitivity [dBm]:-94
Wireless frequency:5 GHz
WiFi standards:802.11n, 802.11a, 802.11ac
Transmission speed – 5GHz [Mb/s]:866
Tx power 5GHz [dBm]:28
Elevation beam width (-6dB) [°]:90
Azimuth beam width (-6dB) [°]:90
5GHz MIMO:2 x 2
Type of antenna:Built-in
Internal antennas:1
Antenna gain [dBi]:7

Connectors and Interfaces
LAN speed:(3) 10/100/1000Mbps
Gigabit LAN:Yes

Power
Power over Ethernet:24V DC
PoE type:PoE-In (only)
Max. power consumption [W]:11,5
Power via connector/terminal:12V DC

Physical characteristics
Purpose:Outdoor
Buttons:Reset
Operating temperature [°C]:-40 up to 70
Weight [g]:280
Width [mm]:60
Height [mm]:224
Depth [mm]:79

Software
Operating mode:Bridge, Access Point
Default IP address:Dynamic from DHCP
Default login and password:admin / admin
– (4) Screws and plugs