EAP613 is a TP-Link brand wireless access point from the EAP family and is intended for indoor use with ceiling or wall mounting. Dual-band WiFi 6 AP with support for the WiFi standards 802.11a/b/g/n/ac/ax is 2×2 MIMO in the 2.4 GHz band and 2×2 MIMO in the 5 GHz band with modulation rates of 574 + 1201 Mbps, four built-in antennas with a gain of 4 dBi and 5 dBi, which support a channel width of up to 80 MHz and functions such as MU-MIMO, OFDMA and encryption with WPA3.

HARDWARE FUNCTIONS
Interface
1× Gigabit Ethernet (RJ-45) port
Button
Reset
Power supply
– 802.3at PoE
– 48 V Passive PoE
– 12 V / 1 A DC (Power Adapter IS NOT included)
Power consumption
11.0W (For PoE);
9.9W (For DC)
Dimensions
(W*D*H) V2 and above: 6.3 × 6.3 × 1.3 in (160 × 160 × 33.6 mm)
Antenna type
Internal Omni Antenna
– 2.4 GHz: 2× 4 dBi
– 5 GHz: 2× 5 dBi
Mounting
– Ceiling /Wall Mounting (Kits included)
– Junction Box Mounting
WLAN FUNCTIONS
Wireless Client Capacity
250+**
WLAN Standards
IEEE 802.11ax/ac/n/g/b/a
Frequency
2.4 GHz and 5 GHz
Signal rate
– 5 GHz: Up to 1201 Mbps
– 2.4 GHz: Up to 574 Mbps
WLAN features
– 1024-QAM
– 4× Longer OFDM Symbol
– OFDMA
– Multiple SSIDs (Up to 16 SSIDs, 8 for each band)
– Enable/Disable Wireless Radio
– Automatic Channel Assignment
– Transmit Power Control (Adjust Transmit Power on dBm)
– QoS(WMM)
– MU-MIMO
– Seamless Roaming §
– Omada Mesh§
– Band Steering
– Load Balance
– Airtime Fairness
– Beamforming
– Rate Limit
– Reboot Schedule
– Wireless Schedule
– Wireless Statistics based on SSID/AP/Client
WLAN-Security
– Captive Portal Authentication§
– Access Control
– Wireless Mac Address Filtering
– Wireless Isolation Between Clients
– SSID to VLAN Mapping
– Rogue AP Detection
– 802.1X Support
– WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Transmission Power
– CE:
<20 dBm(2.4 GHz, EIRP)
<23 dBm(5 GHz band1/2, EIRP) <25 dBm (5 GHz band3)
– FCC:
<25 dBm (2.4 GHz)
<25 dBm (5 GHz)
MANAGEMENT
Omada App
Yes
Centralised Management
– Omada Cloud-Based Controller
– Omada Hardware Controller OC300
– Omada Hardware Controller OC200
– Omada Software Controller
Cloud Access Yes, through
– OC300
– OC200
– Omada Software Controller
– Omada Cloud-Based Controller
Notification by e-mail
Yes
LED can be switched off
Yes
Management access
MAC address-based filterable
Yes
SNMP
v1, v2c, v3
Local/remote system protocol
Local/remote syslog
SSHYes
Web interfaceHTTP/HTTPS
Layer3 management
Yes
Multi-site management
Yes
ManagementVLAN
Yes
Zero-Touch Provisioning
Yes. Requiring the use of Omada Cloud-Based Controller
OTHER
Certification
CE, FCC, RoHS
Package Contents
– EAP613
– Ceiling/ Wall Mounting Kits
– Installation Guide
System Requirements
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux
Environment
– Operating Temperature: 0-40 ℃ (32-104 ℉)
– Storage Temperature: -40-70 ℃ (-40-158 ℉)
– Operating Humidity: 10-90% RH non-condensing
– Storage Humidity: 5-90% RH non-condensing