Specification:
– Colour: black
– Glass door
– Dimensions (mm): 1970 x 600 x 1100
– Gross weight (kg): 140.1
– Net weight (kg): 127.1
– Maximum load (kg): 1800
– Material:Deep-drawn steel sheet, plastic parts, mounting material.
– Accessories:
Side panel key: 2x
Door key: 2x
Cage nut M6: 16x
Plastic washer 6.4: 16x
Screw M6 x 12: 16x
Brush strip: 1x
Edging tape: 1 m
Levelling feet: 4x
Nut M10: 4x

Universal data telecommunication distributor with high load capacity for more demanding applications, with a wide range of dimensions and variants as well as a wide range of accessories and perfect finishing of all details. It is usually supplied with perforated doors for better cooling. This can be supported by the installation of ventilation units in the roof or floor.

Product details
–High stability of the construction
The RDA has a robust welded construction made of 2 mm thick material. The high quality of workmanship and the latest technologies ensure the great appearance of the distributor.
– Flexible door opening
The hinge system allows the door to be opened by almost 165°. The doors can be easily removed and the door hinge changed. The double doors are fitted with plug-in hinges.
–Glass
The sheet metal doors with glued-in glass are made of 4 mm thick impact-resistant tempered glass. If broken, they shatter into many small splinters like car glass. For safety reasons, we recommend closing the solid glass door after installing components to avoid collision with other objects. The glass used has been tested in a certified test centre and meets the requirements of ČSN EN 12150-1+A: Glass in building – Thermally toughened soda-lime silicate safety glass. The tested glass complies with the standard for disintegration after glass breakage, certificate of conformity CQ-24-2023, test report IKATES 58A- 2024.
–Triton swivelling lever handles
We manufacture our own swivelling lever handles for free-standing distributors. By replacing the plastic insert (not included in the accessory pack), a semi-cylindrical locking cylinder can also be used (optional accessory). Patent: PUV 2013-27443
–Adjustable vertical grid rails
The reinforced vertical 19″ grid rails are infinitely adjustable in the enclosure depth. This facilitates the installation of components and cable management.
–Removable side and rear panels
The RDA has a welded frame with removable side and rear panels. These are attached to the frame with keyed alike locks as standard (variants A1 and A5). The A3 and A7 variants are secured with countersunk security screws.
–Special doors for ventilation units
A special solid sheet metal door for the installation of the RAx-CH-X0x-X3 ventilation units can be ordered for this type of distributor. More information can be found in the Active ventilation section.
–Break-out panels
The cable entries of the distributor are fitted with break-out panels (A1 and A5 variants). In the A3 and A7 variants, the covers are screwed on. They can be sealed against dust using the brush strip. An edge protector protects the cables from damage (both are included in the accessory pack).
–Opening for the ventilation unit
The large opening fitted with a clamping panel allows a Triton fan panel to be fitted and removed from the outside without the need for screws.
– Castors, levelling feet, mounting brackets, etc.Castors, levelling feet, plinth
The distributor can be installed on levelling feet (part of the accessory pack) using the optional equipment for plinths, castors or heavy-duty castors with support frame if necessary.
–Rear of enclosure
There are two cable entries with break-out panels in the rear wall of the distributor, one at the top and the other at the bottom. Further cable entries are located in the top and bottom of the cabinet.
–Ventilation slots in the frame
The RDA distributors have ventilation slots in the frame for the supply of cooling air to the installed components. Cooling can be supported by the installation of ventilation units.
–Earthing
All removable parts are interconnected and earthed in accordance with the relevant standard requirements.
–Flex Frame
The system enables the installation of adjustable rails at 19″, 21″ and 23″ spacing for 800 mm wide enclosures. Another option is to move the verticals at 19″ intervals to one side and thus have more space on the other side
.
– Centre pair of vertical mounting rails
For distribution boards with a depth of more than 800 mm, we supply a third pair of vertical mounting rails as standard, which do not interfere with the installation of deeper components thanks to their open profile. Shorter components can be attached to the centre verticals using various types of brackets (optional accessories).
– Wide frame support elements
The wide frame support elements are designed for the additional installation of accessories, e.g. socket strips or vertical cable management panels, which do not take up any 19″ space in the distribution board. Thanks to the well thought-out mounting, socket strips are no obstacle to the use of extendable servers, even in 600 mm wide enclosures.
– Accessories in the support elements
The supports have mounting openings on the inside over the entire height. The openings have the same U spacing as the verticals and can be used to mount certain accessories.
– Supporting elements for versions A5 and A7
The enclosure versions “A5” and “A7” (at the end of the distributor code) have break-out panels in the supporting elements to allow cables to be pulled through between neighbouring enclosures (see data sheet).

Optional accessories
– RAC-VP-D5x-X1: Horizontal cable routing struts for installation on the enclosure frame (support).
– RAX-VP-Vxx-X2: Vertical cable duct for installation on the enclosure frame.
– Socket strips: Socket strips can be installed on the supports of the distribution board using brackets (optional accessories).
– Swivel frame: Socket strips can be installed on the enclosure frame using brackets (optional accessories). Swivelling frame: The 800 mm wide RDA distributors can be fitted with a swivelling frame with a load capacity of 150 kg. The maximum installation depth for 19″ accessories is 330 mm.

Description, use
– 19″ floor-standing distribution board with IP20 degree of protection.
– The distribution board includes 4 (6 for distribution boards deeper than 800 mm) adjustable vertical latching rails for installing components.
– Distribution board construction: welded steel frame with removable walls,
– single or double-wing doors in the IP20 version. Single or double-leaf doors in solid sheet metal, perforated (80 % and 86 % air passage) or glass door versions with 4 mm thick safety glass can be fitted to the front or rear of the distributor,
– Preparation for the installation of vertical cable routing panels and socket strips, including mounting brackets on the enclosure frame,
– Preparation for simple baying of enclosures.
– The maximum permissible load capacity of the individual doors is 20 kg.
– The minimum coating thickness is 65 µm.
– These enclosures are designed for the installation of data and telecommunications systems and their distribution systems.
– The distribution frame and all removable parts (side and rear panels, doors, …) are connected with earthing cables, which must be properly fixed and plugged in during the entire service life of the cabinet.
– There is an M8 screw in the base of the distribution board as the main earthing point.
– Cable entries with break-out panels (screwed on the A3 and A7 versions) are located at the top and bottom.
– The A5 and A7 versions also have concealed cable entries in the uprights for easy cable routing between the distributors.
– The recommended maximum static load of the distributor is 1800 kg when using levelling feet or a plinth.

Operating conditions
Operating conditions:
– indoors,
– the distribution board is not intended for outdoor use or under conditions that may have a negative impact on its function and that of the installed components (e.g. environments with a risk of explosion or damp and wet rooms).

It must be protected against:
– mechanical damage,
– incorrect handling,
– use other than that intended for the distribution board.

Improper handling means in particular:
– overloading (exceeding the recommended maximum load),
– installation of equipment that may adversely affect the operation and functioning of the distributor or the installed components,
– tampering with the distributor structure and its design.

When using the RAX-MS-X47-X1 roller set for direct mounting on the cabinet (The cabinet is 155 mm higher.), the following maximum loads, including enclosure weight, must be observed:
– 500 kg for type RTA, RYA, RDA, RDE width 600 mm,
– 600 kg for type RTA, RYA, RDA, RDE width 800 mm.

When using a castor set with support frame RAX-RK-Dxx-X1 (The castor set RAX-MS-X47-X1 is part of the accessory pack), the maximum load capacity is 1050 kg including enclosure weight **. The enclosure height is increased by 158 mm. The specified load capacity applies to distribution widths of 600 and 800 mm.

When using a roller set with support frame RAX-RK-Txx-X1, the maximum load capacity is 1500 kg including enclosure weight **. The enclosure height increases by 143 mm. The specified load capacity applies to distributor widths 600 and 800 mm.
When using a castor set with support frame RAX-RK-Hxx-X1, the maximum load capacity is 1900 kg including enclosure weight **. The enclosure height is increased by 168 mm. The specified load capacity applies to distribution widths of 600 and 800 mm.
Models A3 and A7 are designed for direct floor mounting. No plinths, levelling feet or castors can be used here.
– To ensure stability, at least 65 % of the load must be installed in the lower half of the enclosure.
The relevant standards must be observed when moving an equipped enclosure*.

Mounting the distributor
To ensure the recommended maximum load, the load must be evenly distributed. The distributor must be set up on a level surface; any minor unevenness can be levelled out using the levelling feet included in the accessory pack. In the event that cables are inserted through one of the openings, these can be sealed with the brush strip and edge protection (both are included in the distributor accessory pack).

Environmental protection
All parts are made from recyclable materials. They must be disposed of in accordance with the applicable regulations after the distributor has been decommissioned.

Declaration of conformity
This product has been certified by TÜV SÜD Czech and fully complies with the ČSN standard EN 62208 ed 2:2012 (EN 62208:2011). The valid certificate can be found on the website www.triton-racks.de/zertifikate.
* The load capacity of the castors applies to a speed of up to 4 km/h on a flat and smooth surface at an ambient temperature in the range of 10-30 °C. All dimensions, load capacities and tolerances comply with the following standards: EN 12527-12533, DIN 7845.
** Total weight of the distributor = dead weight of the cabinet + installed accessories + installed technologies.
Load capacity of a castor = total weight of the distributor / 3.