Industrial distribution board IP20 in grey – separate compartments, suitable for the installation of computers, with ventilation slots in the roof and base sections as well as cable entries and prepared openings for ventilation units.

High stability of the construction
The RPA has a robust welded construction made of 1 mm thick material. The high quality of workmanship and the latest technologies ensure the great appearance of the manifold.

Three separately lockable parts
The RPA manifold has three separately lockable parts. The upper and lower parts are secured with a lock with a Tritón swivelling lever handle, the middle extendable part is intended for the keyboard and mouse and has a single-point lock. In the standard version, all parts are keyed alike.

Flexible door opening
A special hinge system allows the door to be opened at an angle of 165°. The doors can be easily dismantled and the door hinge changed.

Glass
The metal doors with glued-in glass are made of 4 mm thick impact-resistant toughened glass. If broken, they shatter into many small splinters like car glass. For safety reasons, we recommend closing the solid glass door after installing components to avoid collision with other objects. The glass used has been tested in a certified test centre and meets the requirements of ČSN EN 12150-1+A: Glass in building – Thermally toughened soda-lime silicate safety glass. The tested glass complies with the standard for disintegration after glass breakage, certificate of conformity CQ-24-2023, test report IKATES 58A- 2024.

TRITON swivelling lever handles
We manufacture our own swivelling lever handles for free-standing distributors. A classic locking cylinder or half cylinder can be selected by replacing the plastic module (not included in the accessory pack). Patent: PUV 2013-27443

Adjustable vertical grid rails
The vertical 19″ grid rails are infinitely adjustable in the enclosure depth. This facilitates the installation of components and cable management.

Removable side and rear panels
The RPA has a welded frame and removable side and rear panels. These are attached to the frame with locks, which are keyed alike as standard.

Break-out panels
The cable entries of the distribution board are fitted with break-out panels. They can be sealed against dust using the brush moulding. An edge protector protects the cables from damage (both are included in the accessory pack).

Opening for the ventilation unit
The large opening with a break-out panel allows a Triton fan panel to be fitted and removed from the outside without the need for screws.

Castors, levelling feet, plinth
The distributor can be installed on levelling feet (part of the accessory pack) using the optional equipment for plinths, castors or heavy-duty castors with support frame if necessary.

Rear of enclosure
There are two cable entries with break-out panels in the rear wall of the distributor, one at the top and the other at the bottom. There are further cable entries in the top and bottom of the enclosure.

Ventilation slots in the frame
The RPA distributors have ventilation slots in the frame for the supply of cooling air to the installed components. Cooling can be supported by the installation of ventilation units.

Earthing
All removable parts are interconnected and earthed in accordance with the relevant standard requirements.

Optional accessories

RAC-VP-X5x-X1
Horizontal cable routing braces for installation on the enclosure frame (support) in the lower section only.

Description, use
– 19″ floor-standing distribution board with IP20 degree of protection.
– The distribution board includes 4 adjustable vertical snap-in rails for installing the components.
– Cabinet construction:
– welded steel construction with removable walls,
– single-leaf doors in solid sheet metal or glass door versions with 4 mm thick safety glass, located at the front of the cabinet.
– The maximum permissible load capacity of individual doors is 20 kg.
– The minimum order thickness is 65 μm.
– These cabinets are intended for industrial rooms and are suitable for the installation of computers or control elements of technology complexes.
– The enclosure frame and all removable parts (side and rear panels, doors, …) are connected with earthing cables, which must be properly fixed and plugged in during the entire service life of the enclosure.
– There is an M8 screw in the base of the enclosure as a central earthing point.
– Cable entries with break-out covers are located at the top and bottom.
– The recommended maximum static load of the distributor is 400 kg when using levelling feet or a base.

Operating conditions
Operating conditions:
– Indoors,
– The distributor is not intended for outdoor use or in conditions that may have a negative impact on its function and that of the installed components (e.g. environments with a risk of explosion).

It must be protected against:
– mechanical damage,
– incorrect handling,
– use other than that intended for the distributor.

Improper handling includes in particular:
– overloading (exceeding the recommended maximum load),
– installation of equipment that may adversely affect the operation and functionality of the distributor or the installed components,
– tampering with the distributor structure and its design.

When using the roller set RAX-MS-X81-X1 for direct mounting on the enclosure (the enclosure is 108 mm higher), a maximum total load capacity of 200 kg, including enclosure weight, must be observed.

When using a roller set with support frame RAX-RK-Xxx-X1 (the roller set RAX-MS-X81-X1 is part of the accessory pack), the maximum load capacity is 450 kg including enclosure weight **. The enclosure height increases by 111 mm.

To ensure stability, at least 65 % of the load must be installed in the lower half of the enclosure.

The relevant standards must be observed when moving an equipped enclosure*.

Mounting the distributor
To ensure the recommended maximum load, the load must be distributed evenly between the front and rear verticals.

The distributor must be set up on a level surface; any minor unevenness can be levelled out using the levelling feet.
In the event that cables are inserted through one of the openings, these can be sealed with the brush strip and edge protection (both are included in the distributor’s accessory pack).

Environmental protection
All parts are made of recyclable materials and after decommissioning the cabinet, it must be disposed of according to relevant regulations.

Declaration of conformity
This product is certified by TÜV SÜD Czech and fully complies with the ČSN standard EN 62208 ed.2:2012 (EN 62208:2011). The valid certificate can be found on the website www.triton-racks.de/zertifikate.

* The load capacity of the castors applies to a speed of up to 4 km/h on a flat and smooth surface at an ambient temperature in the range of 10-30 °C. All dimensions, load capacities and tolerances comply with the following standards: EN 12527-12533, DIN 7845.

** Total weight of the distributor = dead weight of the cabinet + installed accessories + installed technologies. Load capacity of a roller = total weight of the distributor / 3.

Accessories:
– Side panel key 2x
– Door key 6x
– Screws M6x12 16x
– Brush strip 6.4 16x
– Cage nut M6 16x
– Levelling feet 4x
– Nut M10 4x

Material:
– Deep-drawn steel sheet, plastic parts, assembly material.