LTU-PRO, 5GHz PtMP LTU Client Radio with Advanced RF Performance

Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket as the base station.

Proprietary LTU Technology

Based on ‘s LTU technology, the LTU-Pro is not impeded by the limitations of standard 802.11 WiFi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps of real TCP/IP throughput and modulation rates of up to 4096QAM.

CPE Modes

The LTU-Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment.

Frequency Split

The LTU-Pro can use different frequencies for TX and RX to avoid interference.

Robust Pole Mount Design

The LTU-Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of +/- 15°.

Channel Width Flexibility

Channel width flexibility allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Channel width options include the following:

• 10 MHz
• 20 MHz
• 30 MHz
• 40 MHz
• 50 MHz
• Up to 100 MHz

Auto Power Adjustments

By default, the “Auto Output Power” option allows the LTU-Pro to set the output power (EIRP) to the appropriate level.

Signal Control

The LTU-Pro’s TX output power is controlled by the AP’s target TX output power. A PtMP network can manage signal levels to enhance network stability and achieve optimal wireless performance with the highest possible modulation.

Convenient Configuration

To manage the LTU-Pro, you have two options: the LTU Configuration Interface and Management System (UNMS(TM)). Either option lets you manually configure the LTU-Pro.

Within the LTU Configuration Interface, you can manually configure the LTU-Pro or manage it from the AP side using the “Find My AP” feature. The LTU-Pro will automatically scan for APs using the same channel bandwidth. Select the appropriate AP and then use it to configure the LTU-Pro.

Integrated GPS

Built-in GPS improves synchronization and allows map and Fresnel views on the dashboard.

• Dimensions: 316.5 x 316.5 x 174.3 mm
• Weight: 1.3 kg
• Networking interface: (1) 10/100/1000 Ethernet port
• Enclosure: Outdoor UV stabilized plastic
• Max. power consumption: 9 W
• Power supply: 24 V, 0.5 A Gigabit PoE adapter (included)
• Power method: 24 V passive PoE (pairs 4, 5+; 7, 😎
• Voltage range: 22 – 26 V
• Max. conducted TX power: 22 dBm (per chain)
• Gain: 24 dBi
• Beamwidth: 14°
• Sidelobe level: -10 dB
• Front-to-back ratio: 27 dB
• Mounting: Pole mount (kit included)
• Wind loading: 150 N (at) 200 km/h (33.72 lbf (at) 125 mph)
• Wind survivability: 200 km/h (125 mph)
• ESD/EMP protection: +/- 24 kV contact/air
• Operating temperature: -5°C to 40°C (23°F to 104°F)
• Operating humidity: 10 – 90% non-condensing
• Certifications: CE, FCC, IC