Ubiquiti – UA-G3-B – G3 reader
incl. 19% VAT plus shipping costs
G3 Reader – Compact third generation access reader with Apple Touch Pass support. Overview – Dimensions: 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4″) – NFC Card & Keyfob Access: Yes – Touch Pass: Yes – Mobile Unlocking: Yes – Handwave Request to Exit: Yes…
When you purchase this item you will receive. 146 Points | SKU | 405854 |
|---|---|
| EAN | 4251877281184 |
| MPN | UA-G3-B |
| Categories | Smart Home, Accessories, Networking |
| Tags | Networking, new product, NFC Cardreader, Ubiquiti, UniFi, Unifi Access |
G3 Reader – Compact third generation access reader with Apple Touch Pass support.
Overview
– Dimensions: 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4″)
– NFC Card & Keyfob Access: Yes
– Touch Pass: Yes
– Mobile Unlocking: Yes
– Handwave Request to Exit: Yes
– Weatherproof: IP55
Mechanical
– Weight: 82 g (2.9 oz)
– Housing material: Polycarbonate, glass
– Mounting material: Aluminium alloy
– Mounting: Flush-mounted, flush-mounted box (included); junction box (optional)
Hardware
– Indoor and outdoor use: Yes
– Operating temperature: -30 to 45 °C
– Humidity: 5 to 90 % non-condensing
– Network interface: (1) 10/100 MbE RJ45 port
– Connectivity: BLE 4.1; NFC
– Power supply method: PoE; UL 294 Power-limited Class 2 PSU; UL 60950-1/62368-1 LPS/PS2 PSU
– Max. Power consumption: 5 W
– Supported voltage range: 48V DC
– ESD/EMP protection: air: ±15kV, contact: ±8kV
– Sensors: Proximity sensor
– Speaker: Yes
– LEDs: R/G/B/W
– Button: (1) Factory reset
– NFC frequency: 13.56 MHz
– NFC read range: < 30 mm (1.18”)
– NFC technology: ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340); MIFARE Classic / MIFARE DESFIRE; Sony FeliCa™ (ID only); NFC Forum Tags T1T, T2T, T3T, T4T and T5T; ECP 2.0
– PoE cabling requirements: Cat 5e cabling is recommended as the minimum power category. The power category used should match the transmission speed required at the installation site. The minimum allowable conductor cross-section for the connection between the PSE or Power Injector and the PD is 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cables.
– UL 294 Level: Destructive Attack: Level I; Line Safety: Level I; Durability: Level I; Standby Power: Level I
– UL 294 Explanation: Compliance with IEEE 802.3 specifications has not been verified under UL 294. The device shall comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
– CAN/ULC-60839-11-1 Class: Classification: I
– Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
– Document number and issue date and/or revision level: UA-G3, V01
– NDAA compliant: Yes
Software
– Management application: Access
– Software information: The software version can be checked at https://unifi.ui.com.
