Overview
– Dimensions: 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6″)
– Integrated Camera: Yes
– NFC Card & Keyfob Access: Yes
– PIN Access: Yes
– Touch Pass: Yes
– Mobile Unlock: Yes
– Two-Way Intercom & Doorbell Access: Yes
– Weatherproofing: IP55

Mechanical
– Weight: 136 g (4.8 oz)
– Enclosure Material: Polycarbonate, glass
– Mount Material: Aluminum alloy
– Mounting:
Wall, gang-box mount (Included)
Angle mount, junction box (Optional)

Hardware
– Indoor and Outdoor Use: Yes
– Ambient Operating Temperature:
– Device: -30 to 45° C (-22 to 113° F)
– Display: -10 to 45° C (14 to 113° F)
– Ambient Operating Humidity: 5 to 90% noncondensing
– Networking Interface: (1) GbE RJ45 port
– Connectivity: BLE 4.2, NFC
– Power Method:
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
– Max. Power Consumption: 6W
– Supported Voltage Range: 48V DC
– ESD/EMP Protection: Air: ±15kV, Contact: ±8kV
– Sensors: Proximity sensor
– Display: Size: 120 mm (4.7″) diagonal
– Touch Screen Technology: Capacitive touch
– Display Luminance: 480 nits (Typical)
– Screen Orientation: Portrait
– Resolution: 1280 x 286 px
– Microphone: Yes
– Speaker: Yes
– LEDs: R/G/B/W/Amber Learn More
– Button: (1) Factory-reset
– NFC Frequency: 13.56 MHz
– NFC Read Range: < 30 mm (1.18”)
– NFC Technology: ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0
– PoE Cabling Requirement: Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
– UL 294 Level: Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
– UL 294 Statement: Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
– CAN/ULC-60839-11-1 Grade: Grade assignment: I
– Certifications: CE, FCC, IC,UL 294, CAN/ULC-60839-11-1
– Document number, and issue date and/or revision level
– UA-G3-Pro-W/UA-G3-Pro-B, V01

Software
– Management Application: Access